0.2 RC3 (1 Viewer)

Thread starter Armbruster
Start date March 27, 2006

Armbruster

New Member

March 27, 2006

Hello,

after installing the version RC3 of 0.2 I am able to scan for TV stations. However if I switch to MP I receive the message "Unable to activate Live TV"

Hardware Hauppauge Novo-T 9002, Driver version 2.1

Taipan

Retired Team Member

Premium Supporter

March 27, 2006

If you want any help with this issue, then I suggest you use the Support Template and provide more specific details of the problem.... :?

Users who are viewing this thread

Similar threads

MP1 MP2 Server and client work but remote clients fail DE

Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall rules were set to Public. I couldn't connect to the new TV Server from my old single-seat installation running 32-bit until I changed all MP-related firewall rules on the new machine to Private. Before I did...

Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall...

Server and client on modern uptodate Windows 11 desktop. Software is Server and Client version x86 1.38.003 Remote client on...

2 3

Replies: 26

Views: 2K

Thursday at 05:33

mrceolla

MP1 MP2 Anyone using SiliconDust HDHomeRun Flex Quatro 4? DE

I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network. Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units. Go to SD's support website and download and install the windows...

I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...

I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...

Replies: 3

Views: 1K

January 30, 2026

tarrow

MP1 MP2 An installation report - older hardware and why I used 1.33 not 1.38 DE

4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0 on Windows 7 SP1

4.5 is really old. I'm not sure 4.5.5 even is a version that actually existed. You should be able to install .NET Framework 4.8.0...

My TV PC is more a cast-off on older hardware (a 'Quiet PC' i5 4690, 16GB ram, 2xSSD 1xHDD, system graphics), mainly as a cheap way...

Replies: 5

Views: 2K

December 30, 2025

el Filou

MP1 MP2 1.36 IP channels not adding to database when scanning DE

It's getting weirder..... If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the stations but if I rescan it on the same card it just keeps updating the 1 channel. My brain is melting.........

It's getting weirder..... If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the...

Having great fun with this still. I have a fairly good PC setup, Ryzen 5 8500g, Msi Pro 650M-P with 32GB of RAM with a TBS 6281 and...

Replies: 2

Views: 1K

December 17, 2024

fangio99

MP1 MP2 Logo Management, Revisted DE

Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in Settings (which somehow I had missed, I think because it wasn't an option previously), and the deleted everything in the Flat-default folder and populated it with my own logos. Works, so far.

Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in...

Hi-- I have to revisit an old issue, unfortunately. I just downloaded MP 2.5, a fresh installation, on a new computer (reluctantly...