ATI Catalyst™ version 9.3 out now! (1 Viewer)
- Thread starter Helios61
- Start date
Not in release note.
- March 4, 2008
- 2,114
- 1,176
- Home Country
-
Netherlands
arghh... for the hd 4350 dxva is still broken.
only have mpeg2 +vc1 decoding. No h264
I tested with DXVA checker. I have the exact same results as 9.2.
I also tested several MKV files. They all only play if I deselect H264 (DXVA) in the settings of MPC-HC codec.
Deinstalled 9.3 again and installes 8.12, and DXVA checker says its ok again and mkv's work with dxva normally now
only have mpeg2 +vc1 decoding. No h264
I tested with DXVA checker. I have the exact same results as 9.2.
I also tested several MKV files. They all only play if I deselect H264 (DXVA) in the settings of MPC-HC codec.
Deinstalled 9.3 again and installes 8.12, and DXVA checker says its ok again and mkv's work with dxva normally now
For me 9.3 working great on HD4550 and HD3850. Finaly!!!
9.2 was broken on HD4550, now working - tested MPEG2, H.264 and VC-1 !
9.2 was broken on HD4550, now working - tested MPEG2, H.264 and VC-1 !
DXVA is working great here too,tested on Vista x64 with MPC and Cyberlink 9 h264 decoders...
- March 4, 2008
- 2,114
- 1,176
- Home Country
-
Netherlands
Well, I just did a recheck on the 9.3 drivers after I read somewhere that dxva could be wrong.
As it turns out, DXVA IS working for me. But DXVA checker doesnt confirm this. I tested it in MP itself, and the cpu was low as it should be.
So sorry for giving a false negative.
As it turns out, DXVA IS working for me. But DXVA checker doesnt confirm this. I tested it in MP itself, and the cpu was low as it should be.
So sorry for giving a false negative.
- Moderator
- #10
DXVA working great here also, using an ATI Radeon 4550 on Vista 32-bit (see my sig for more system specs).
Tested with playback of SD & HDTV channels, properly profiled x264 MKV's and Bluray discs. (Codecs: ATI Avivo, MPC Video Decoder, Cyberlink PowerDVD MPEG2 & H264).
I also want to note that i didn't have problems with 9.2 either to be honest and i don't get the fuzz about DXVA supposedly not working with every other release of catalyst. I only noticed had one release of the driver back in the 8.x range (forgot which one) that was not working. However i did have some black level/color issue with 9.2 that are now gone in 9.3 (but i can't confirm this untill i have tested that with some calibaration videos)
Tested with playback of SD & HDTV channels, properly profiled x264 MKV's and Bluray discs. (Codecs: ATI Avivo, MPC Video Decoder, Cyberlink PowerDVD MPEG2 & H264).
I also want to note that i didn't have problems with 9.2 either to be honest and i don't get the fuzz about DXVA supposedly not working with every other release of catalyst. I only noticed had one release of the driver back in the 8.x range (forgot which one) that was not working. However i did have some black level/color issue with 9.2 that are now gone in 9.3 (but i can't confirm this untill i have tested that with some calibaration videos)
Users who are viewing this thread
Similar threads
Thanks... So annoying.
I didn't notice it had stopped working and missed some recordings.
The version number still seems to be 1.7.2. Hard to tell that the file has been updated.
Sigh. I stream a lot of it now anyway.
Good question on mc2xml.exe & schedulesdirect. I donated many, many moons ago for schedulesdirect support. I...
Thanks... So annoying.
I didn't notice it had stopped working and missed some recordings.
The version number still seems to be...
Some of you may remember the last time MC2XML expired and quit working on Schedules Direct (why does it do that?). Anyway, it quit...
Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in Settings (which somehow I had missed, I think because it wasn't an option previously), and the deleted everything in the Flat-default folder and populated it with my own logos. Works, so far.
Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in...
Hi--
I have to revisit an old issue, unfortunately. I just downloaded MP 2.5, a fresh installation, on a new computer (reluctantly...
Good evening,
the last weeks my MP2.5 Server with TVE3 is running not very good/stable. After 30 min the server quits working after changing EPG from EPG Buddie to Clickfinder (TV Movie). The OS and the MP2.5 Server Software were installed several times new, but in general nothing changed.
Are there any changes or setting needed for...
Good evening,
the last weeks my MP2.5 Server with TVE3 is running not very good/stable. After 30 min the server quits working...
Good evening,
the last weeks my MP2.5 Server with TVE3 is running not very good/stable. After 30 min the server quits working...
O Frabjous Joy!
That seems to have done the trick.
Thank you so much for your help and advice, CyberSimian. I hadn't thought of deleting the various folders, but I'll bear that in mind for any future disasters. Now I can record King & Conqueror on Sunday!
Cheers
Ralph
O Frabjous Joy!
That seems to have done the trick.
Thank you so much for your help and advice, CyberSimian. I hadn't thought of...
I've been running MediaPortal on my PC for several years, but the most recent update "MediaPortal 1.38 Release " does...
Sorry, I didn't get email notifications on these latest replies. I just came here to report I solved the problem after adjusting power settings for "Intel Graphics". I set it to Maximum Performance. I tried many other things so it could be a combination of them, but this was the last thing I did and I haven't had the problem return...
Sorry, I didn't get email notifications on these latest replies. I just came here to report I solved the problem after adjusting...
I'm running MP1 as a client only on this:
https://www.amazon.com/dp/B0DZX5DWS5?ref_=pe_123509780_1038749300_t_fed_asin_title&th=1...