Compiling anysee branch from GitHub (1 Viewer)
- Thread starter jehe
- Start date
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Hi again Jean, Sebastiii
This is very puzzling!
The problem is still only with the high band transponders. This means approximately half your channels would be found, but the other half would not be found.
Unfortunately for us I only have one high band transponder that I can test with... and it works for me.
Did you try to revert to the older driver? To me it looks like you are still using a different one to me. If you want, I can upgrade and see if it still works...
Your hardware info is:
Mine is like this:
So as you can see, it is seems the same except the driver version and current tuning statistics.
Two other things you could try:
- increase the "repeat commands..." value for DiSEqC to 1 (this is in the tuner settings section that Seb mentioned)
- try the attached alternate version of the Anysee plugin
mm
This is very puzzling!
The problem is still only with the high band transponders. This means approximately half your channels would be found, but the other half would not be found.
Unfortunately for us I only have one high band transponder that I can test with... and it works for me.
Did you try to revert to the older driver? To me it looks like you are still using a different one to me. If you want, I can upgrade and see if it still works...
Your hardware info is:
Mine is like this:
So as you can see, it is seems the same except the driver version and current tuning statistics.
Two other things you could try:
- increase the "repeat commands..." value for DiSEqC to 1 (this is in the tuner settings section that Seb mentioned)
- try the attached alternate version of the Anysee plugin
mm
- February 15, 2011
- 694
- 216
- 59
- Home Country
-
Belgium
- Thread starter
- #53
Hello Sebastiii,mm,
First about the database, i think the database is correct (see attached screenshot).
I use the drivers from the following website:http: //www.anyseedirect.eu/category/2-drivers-en-plugins.html .
I am going to find and install your driver, it would be easy if you upload the driver.
Then I will test your plugin and settings.
But first I must go shopping with the wife.
Jean
First about the database, i think the database is correct (see attached screenshot).
I use the drivers from the following website:http: //www.anyseedirect.eu/category/2-drivers-en-plugins.html .
I am going to find and install your driver, it would be easy if you upload the driver.
Then I will test your plugin and settings.
But first I must go shopping with the wife.
Jean
Attachments
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Hi again Jean
http://www.anysee.com/eng/download/S_Series.php
They still work for me...
No rush.
mm
Yes, it looks okay to me.
I did not know about that website. I just downloaded and installed the latest drivers from here:
http://www.anysee.com/eng/download/S_Series.php
They still work for me...
But first I must go shopping with the wife.
No rush.
mm
- February 15, 2011
- 694
- 216
- 59
- Home Country
-
Belgium
- Thread starter
- #55
Hello,
logs taken with driver "_drivers_anyseeDriver_Setup_CNO_20120309" and with these settings -> see screenshot
scan is started at 16.31 h
There were no differences with the previous scan.
Jean[DOUBLEPOST=1341675037][/DOUBLEPOST]Hello again,
logs taken with these settings --> see screenshot
scan is started at 17.09 h
There were no differences with the previous scan.
Jean
logs taken with driver "_drivers_anyseeDriver_Setup_CNO_20120309" and with these settings -> see screenshot
scan is started at 16.31 h
There were no differences with the previous scan.
Jean[DOUBLEPOST=1341675037][/DOUBLEPOST]Hello again,
logs taken with these settings --> see screenshot
scan is started at 17.09 h
There were no differences with the previous scan.
Jean
Attachments
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Hi again
Please try the patch that I posted - this is the next best thing to try:
1. Stop TV Server.
2. Take a backup of the Anysee.dll in the TV Server plugins\CustomDevices\ folder.
3. Download and extract the provided DLL into that folder to replace the old one.
If that doesn't work, I think we need to try scanning a single transponder using advanced scanning.
Frequency = 12110000 kHz
Symbol Rate = 27500 ks/s
Polarisation = Horizontal
Modulation = Not Set
Inner FEC Rate = 3/4
Pilot = Not Set
Roll Off = Not Set
(DiSEqC = Port A)
(LNB Type = Universal)
(Satellite = 19.2e)
mm
Please try the patch that I posted - this is the next best thing to try:
1. Stop TV Server.
2. Take a backup of the Anysee.dll in the TV Server plugins\CustomDevices\ folder.
3. Download and extract the provided DLL into that folder to replace the old one.
If that doesn't work, I think we need to try scanning a single transponder using advanced scanning.
Frequency = 12110000 kHz
Symbol Rate = 27500 ks/s
Polarisation = Horizontal
Modulation = Not Set
Inner FEC Rate = 3/4
Pilot = Not Set
Roll Off = Not Set
(DiSEqC = Port A)
(LNB Type = Universal)
(Satellite = 19.2e)
mm
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Hi again Jean
This is so strange!
CNO is closed, isn't it?
Have you got DVBViewer or any other software that you can quickly try to scan in to ensure that the problem is with TV Server?
Would it be possible to test with the switch removed? (If not, it should still be possible to scan 19.2e with DiSEqC "none" - we need to try and determine whether this is a DiSEqC or tuning parameter problem... or something else)
mm
This is so strange!
CNO is closed, isn't it?
Have you got DVBViewer or any other software that you can quickly try to scan in to ensure that the problem is with TV Server?
Would it be possible to test with the switch removed? (If not, it should still be possible to scan 19.2e with DiSEqC "none" - we need to try and determine whether this is a DiSEqC or tuning parameter problem... or something else)
mm
- February 15, 2011
- 694
- 216
- 59
- Home Country
-
Belgium
- Thread starter
- #59
Hello mm,
Have done that , logs included.
Normally I can scan with the Anysee viewer software, but after that I have sql express installed, it will not work, and i can not reinstalle the software , there is something wrong with the BDE information utility. Therefore I reinstall windows.
Jean
Have done that , logs included.
Normally I can scan with the Anysee viewer software, but after that I have sql express installed, it will not work, and i can not reinstalle the software , there is something wrong with the BDE information utility. Therefore I reinstall windows.
Jean
- February 15, 2011
- 694
- 216
- 59
- Home Country
-
Belgium
- Thread starter
- #60
Hello,
Windows 7 reinstalled+anysee viewer software.(http://www.anyseedirect.eu/category/1-software.html)
No problems with scanning and viewing .
Tomorrow a shall reinstall mediaportal.
I still have to tell you that I use a Technisat Multytenne Twin-LNB satellite dish . with the following LNB specifications:
Low-band LOF: 9,750 MHz
High-band LOF: 10,600 MHz
Low/high-band switchover 22kHz signal from the receiver.
So everyone have a nice evening (or day).
mm, Sebastiii, Thank you for your hard work and support today.
Jean
Ps; mm when do you sleep actually, it looks like you're available day and night
Windows 7 reinstalled+anysee viewer software.(http://www.anyseedirect.eu/category/1-software.html)
No problems with scanning and viewing
.Tomorrow a shall reinstall mediaportal.
I still have to tell you that I use a Technisat Multytenne Twin-LNB satellite dish . with the following LNB specifications:
Low-band LOF: 9,750 MHz
High-band LOF: 10,600 MHz
Low/high-band switchover 22kHz signal from the receiver.
So everyone have a nice evening (or day).
mm, Sebastiii, Thank you for your hard work and support today.
Jean
Ps; mm when do you sleep actually, it looks like you're available day and night
Users who are viewing this thread
Similar threads
If you’re planning to submit a pull request, let’s go through the list of issues and their solutions.
I or someone from the team will create a Jira ticket, and for each ticket, you’ll make the changes and submit a pull request.
This will be transparent and straightforward.
If you’re planning to submit a pull request, let’s go through the list of issues and their solutions.
I or someone from the team...
I'm very glad to see that mediaportal 1 is on github, where ordinary devs with github accounts can make contributions.
Please can...
I don't think so, because MP has no way of knowing at which timestamp the external player stopped playback.
Best way to achieve this would be to use an auto-resume feature in your external player itself. (MPC-HC can do that, I don't know about VLC)
I don't think so, because MP has no way of knowing at which timestamp the external player stopped playback.
Best way to achieve...
Hello Folks,
Is it possible to enable MP to resume in an External Player, where it left off ?
I guess the question also is, can...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For the first example, I highlighted the example text and eventually found the location in the menus where I could select the CODE macro to have the example text formatted as a code example. So far, so good...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
Are different people taking turns watching the same thing on the same HTPC?
For me, separating users in MP2 is a drawback, as is the interface.
Simply put, this can't be done in MP1, or rather, it can't be done quickly, because everything would have to be rewritten.
But if each user logs in with their own Windows account, MP1 can...
Are different people taking turns watching the same thing on the same HTPC?
For me, separating users in MP2 is a drawback, as is...
Hello,
Is there a way to integrate a multi-user interface in MP1 where you can create different end users, similar to MP2? A...
maybe setting loglevel to debug might pinpoint the difference between normal and stuck?
Preferable with as much disabled as possible
also try to see if anything is happening during stuck for the mediaportal process(resource monitor, disk activity, cpu usage, anything)
maybe other programs competing for resouces?
maybe setting loglevel to debug might pinpoint the difference between normal and stuck?
Preferable with as much disabled as...
Since over a year my MP sometimes stucks while showing the welcome screen. It started once a week now it happens every second time...
