I was just tinkering with a few settings in the MediaPortal configuration and am happy to have found the cause of the problem. Disabling the option "Single seat setup: force RTSP usage" under "TV/Radio", "Advanced Options" resolved the issue. After I disabled this option, I was able to delete the recordings the first time...

I was just tinkering with a few settings in the MediaPortal configuration and am happy to have found the cause of the problem...

Deleting recordings sometimes doesn't work. Neither the 0 button nor the Info/Delete button works. Nothing happens at all with...

Replies: 6

Views: 940

March 26, 2026

struppi21

MP1 MP2 standby problem after reinstallation DE

I have also had this problem in the past. There are two components to this problem: Your internet router is pinging the HTPC at regular intervals in order to see if the HTPC is still present on the network. The network adapter in the HTPC has "Wake on Lan" enabled. So at the end of a recording, the HTPC transitions from away mode to...

I have also had this problem in the past. There are two components to this problem: Your internet router is pinging the HTPC at...

Nachdem ich mp 1.38 neu installiert habe klappt soweit alles wie früher. Ein Problem besteht aber und das ist Standby nach einer...

Replies: 6

Views: 885

May 15, 2026

CyberSimian

MP1 MP2 Scanning & Mapping channels DE

I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab: The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...

I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation. "TV Server...

I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each) Is there...

Replies: 1

Views: 1K

January 10, 2026

CyberSimian

MP1 MP2 RTSP - test with VLC on same box, correct syntax? DE

I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.

I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV...

Hi everyone, I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...