Encrypted TV was working fine, now suddenly reports "Channel is scrambled" (1 Viewer)
- Thread starter pmcguire
- Start date
Finland
Users who are viewing this thread
Similar threads
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a DVB-T2 tuner (a TBS 6284) :(, but succeeded when I used a DVB-T tuner (a Pinnacle 2000i) :). Obviously the Pinnacle found only those channels broadcast in DVB-T MUXes (in the UK we have both DVB-T MUXes and...
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a...
Hi all
Running 1.7.1.0 TV Server as part of a full upgrade to MP2 2.5 setup
After some problems with retuning (solved -...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings, advanced options, I switched to UNC paths instead of the default RSS, and it's working very well. Sure I had to figure out the paths, but no big deal.
Maybe helpful for someone in the future. Thanks for the...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings...
Hi folks. I have an issue with a new install/integration into my mediaportal system. I have a “mediaportal server” which has the TV...
I solved it myself, by modifying the host IP-address in the server table of the database,
MariaDB [(none)]> use mptvdb;
Database changed
MariaDB [mptvdb]> SELECT * FROM Server;
+----------+----------+--------------+----------+
| idServer | isMaster | hostName | rtspPort |
+----------+----------+--------------+----------+
|...
I solved it myself, by modifying the host IP-address in the server table of the database,
MariaDB [(none)]> use mptvdb;
Database...
Hello everyone,
I'm going to need help from the community to resolve a TV server crash issue.
I encountered a problem with my...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use just to control volume and standby, will no longer put my devices (TV & AVR) to sleep when the HTPC is put in standby. Also when I wake up the HTPC MP closes or crashes (not sure which) as per the example in...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
It works perfect now. All channels have been found, even with the default tuning files.
Thank you very much! (y)
I'd love seing this change in MP 1.33! :)
It works perfect now. All channels have been found, even with the default tuning files.
Thank you very much! (y)
I'd love seing...
With my new hardware, Windows 11 and MP 1.32 the TV channel scan is not working anymore. The frequencies are scanned but no...