Radio works in single seat with tvserver and client, but does not work over network to another PC. All channels and groups are shown, but when I select radio MediaPortal seems to hang for a couple of seconds, then shows it's playing sth in the bottom left (BlueTwo Skin) and then stops. No sound is played while testing this.
TV is working withouth problems.
Both are using the same PC as server which is:
TV-Server Version: tvengine3-10-18-2007--01-22h--Rev16264.zip MediaPortal Version: Media Portal 0.2.3.0 RC3 TVE3 and svn--10-17-2007--23-05-Rev16261 MediaPortal Skin: ReVision Windows Version: Windows XP Pro SP2 with latest patches CPU Type: Pentium-M 740 HDD: Samsung SpinPoint T166 500GB (HD501LJ) Memory: 2 x 512MB Infineon DDR Motherboard: Asus P4P800 SE Motherboard Chipset: Intel 865G Motherboard Bios: Video Card: nVIDIA GeForce FX 5200 Video Card Driver: 84.21 Sound Card: SoundMax AD1985 (onboard) Sound Card AC3: coaxial out Sound Card Driver: WDM 5150 1. TV Card: FloppyDTV DVB-S-CI 1. TV Card Type: DVB-S 1. TV Card Driver: 4.8.0 MPEG2 Video Codec: Nvidia Purevideo MPEG2 Audio Codec: Nvidia Purevideo Satelite/CableTV Provider: Astra HTPC Case: Silverstone LC-10B Cooling: Power Supply: Coba 350W Remote: Logitech Harmony 525 TV: Samsung LE-27T51B LCD TV - HTPC Connection: Sub-D
Just did a clean install with 0.2.3.0 and MediaPortal-svn--10-20-2007--10-41-Rev16300.exe on the client pc. Here are the logs from both:
On the server it works fine.
On the network client the radio doesn't work (since a long time), and it would be great if somebody could make it running before the final release.
I installed the new EXE on my MP 1.36 64-bit system (Win 10 laptop), and... it works fine. (y) :)
Thank you for making this change :). I hope that it will be included in the next release.
-- from CyberSimian in the UK
I installed the new EXE on my MP 1.36 64-bit system (Win 10 laptop), and... it works fine. (y) :)
Thank you for making this...
In "MP Config" the following setting enables the display of channel numbers in the TV EPG:
But there is no equivalent setting in...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For the first example, I highlighted the example text and eventually found the location in the menus where I could select the CODE macro to have the example text formatted as a code example. So far, so good...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
I made some updates to the Wiki page describing the <import> and <include> tags, including adding a couple of new xml examples. For...
It may seem strange, but the open-source license allows anyone to sell physical CDs or DVDs to customers, provided that, for example, the source code is made available upon request and additional value is provided, such as an installation manual. Both of these are mentioned in the product description, so it appears to be legitimate...
It may seem strange, but the open-source license allows anyone to sell physical CDs or DVDs to customers, provided that, for...
I just recently started using your software and I noticed on eBay one person is selling it for about $16.00. You can make a claim...
Now with Version 1.37 x64 MP is near to perfect with repect to speed, robustness and funtionality. There is just one point where I have an Idea for further improvement. As I am not too interested in advetisments, I am using comskip to mark times of ads, which is normally working, as it should but produces an error when trying to...
Now with Version 1.37 x64 MP is near to perfect with repect to speed, robustness and funtionality. There is just one point where I...
Now with Version 1.37 x64 MP is near to perfect with repect to speed, robustness and funtionality. There is just one point where I...
I have also had this problem in the past. There are two components to this problem:
Your internet router is pinging the HTPC at regular intervals in order to see if the HTPC is still present on the network.
The network adapter in the HTPC has "Wake on Lan" enabled. So at the end of a recording, the HTPC transitions from away mode to...
I have also had this problem in the past. There are two components to this problem:
Your internet router is pinging the HTPC at...
Nachdem ich mp 1.38 neu installiert habe klappt soweit alles wie früher. Ein Problem besteht aber und das ist Standby nach einer...