Hauppauge Nova-S PLUS and Dvb-s2? (3 Viewers)

skogh

New Member
January 8, 2007
3
0
44
Home Country
Sweden Sweden
Is it true what the "supported tvcards wiki" says, that Hauppauge Nova-S PLUS card supports dvb-s2?
 

infinite.loop

Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    that entry in the wiki was wrong.

    btw. only TV-Server will support dvb-s2.
    the support for Nova-HD-S2 is not finished yet. dvb-s2 is not working atm.
     

    stevie77

    Portal Member
    June 21, 2007
    24
    8
    Home Country
    Austria Austria
    I don't know if it helps, but i read in another forum, that the hauppauge bda-driver for HVR-4000 and NOVA-HD-S2 needs two additional parameters for tuning. They're called "pilot symbols" (on/off) and "roll-off" (0,xx numeric value).
    Without them it doesn't tune to hd-channels.
    Maybe dman knows that already....

    greets
    stevie77
     

    Mew

    Portal Pro
    January 11, 2007
    356
    111
    53
    Hertfordshire
    Home Country
    England England
    My Hauppauge WinTV HVR-4000 tunes to BBC HD Ok in TVe3. I think BBC use DVB-S at the moment rather than DVB-S2. It may be the DVB-S2 that needs additional parameters.

    Mew
     

    infinite.loop

    Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    dvb-s2 uses different modulation(s).
    support for dvb-s2 has to be added manualy to the TV-Server, because M$ has not included it (as many other things too :confused: ) in the BDA-specification......

    dvb-s2 part of the NOVA-HD-S2 is not supported yet (i have one here too ;) )
     

    stevie77

    Portal Member
    June 21, 2007
    24
    8
    Home Country
    Austria Austria
    I only wanted to give dman a hint, which could make it possible for him to add support for ther nova-hd-s2 (and hvr-4000).
    I've read that also the hauppauge driver uses other values for 8psk modulation that documented in their own guide.
    I don't know if he know's that already, so just a hint!
     

    infinite.loop

    Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    I only wanted to give dman a hint, which could make it possible for him to add support for ther nova-hd-s2 (and hvr-4000).
    I've read that also the hauppauge driver uses other values for 8psk modulation that documented in their own guide.
    he is allready working on the support since quite some time.
    he is also in contact with Hauppauge. The problem is that Hauppauge goes their own way in some techical aspects which are different to other manufaturers. furthermore, it seems that they have a slight issue in their drivers ;)
     

    Users who are viewing this thread

    Similar threads

    It's getting weirder..... If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the stations but if I rescan it on the same card it just keeps updating the 1 channel. My brain is melting.........
    It's getting weirder..... If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the...
    Having great fun with this still. I have a fairly good PC setup, Ryzen 5 8500g, Msi Pro 650M-P with 32GB of RAM with a TBS 6281 and...
    Replies
    2
    Views
    142
    MP1 MP2 DVB-T playback DE
    Those signal numbers look fine. (y) Unfortunately, I don't have any other suggestions as to the possible cause of your problem. :( -- from CyberSimian in the UK
    Those signal numbers look fine. (y) Unfortunately, I don't have any other suggestions as to the possible cause of your problem. :(...
    I've just rebuilt my htpc and added DVB-S and DVB-T cards TBS6281 and TBS6982. The system is all working well except for playback...
    Replies
    3
    Views
    641
    I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software controls the emitter, and transmits IR signals under the direction of MP. The IR signal is received by the IR receiver within the set-top box, and so can be used to change channel and so on. The set-top...
    I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software...
    My computer is running Windows 10 Pro. I have installed MP2. Not sure what version. I have a Hauppauge WinTV 1850 TV card...
    Replies
    8
    Views
    2K
    It should work, but the error is in something else, but it is not yet clear what.
    It should work, but the error is in something else, but it is not yet clear what.
    I have MP1 TV Server 1.30 installed on Windows Server 2012R2 (with some bits added for tuner support). MP Server versions have...
    Replies
    5
    Views
    880
    I've updated dlls in first post. Fixes: Summary / Overview was always empty Collections were not filtered to official ones Studios were not populated Fallback to english tagline didn't work Score / Popularity now empty instead of dummy rating and unknown popularity numbers Also I've tried to compile plugin against MP 1.34 x64 and...
    I've updated dlls in first post. Fixes: Summary / Overview was always empty Collections were not filtered to official ones Studios...
    Hi! TheTVDB.com has movies in their API now. API itself looks ok now so I decided to add TVDB to Moving Pictures. Check it if you...
    Replies
    2
    Views
    797
    Top Bottom