I am putting a htpc in my bedroom it will stream live tv from a tvserver and movies and as ethernet realy isnt practical here i was thinking about homeplug and was wondering if any has had any experience with this.
yes, I have the devolo dlan (which is homeplug compatible).
At first I used the 80mb device, but when I swiched my system to HD i bought the 200mb device, wich is working flawless in my config.
I have a net throughput of about 60mb which is enough for HD videos and Streaming.
My NAS is located in the basement (Qnap-201) and is connected via a fritzbox 7170 to the homeplug adapter.
My power lines are about 10 years old, just for info.
I'm using the Netgear av 200 and I can stream HD between both. Of course it will be highly dependant on cable length, noise level on the line and cable quality. Good luck with your setup.
to be on the safe side... if you want to stream HD you should use the 200mb device. I often had stuttering in hd movies with the 85 mbit, thats why I bought the 200mb one.
But be adviced: those devices (85/200) are not compatible, even though they can be used in parallel.
I'm using Homeplug AV (200mbps) ZyXEL myself (P660HWP router and 2 x PLA-401 adaptors). Router lovely and neat with onboard Homeplug AV but general configuration not very intuitive! PLA adaptors easy to use. Figured might as well go for Homeplug AV even though MP Client is just streaming standard definition TV; AV meant to have improved resilience to noise as well as improved speed.
Once set up have had no problems at all, adaptors don't get too warm; router gets quite warm.
AV gives extra headroom for additional MP Clients (hope, hope!!).
Deco.
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC.
TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.
I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC.
TV...
Hi everyone,
I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...
I would have to know more details, and ultimately, I'll have to test it when I get my new display, but an AI answer I got (I don't trust AI and this may not be correct) was that HDR is encoded with the HEVC codec and I know MePo uses the HEVC codec to play 4K UHD Blue-ray discs. So, there is at least the possibility that it will work...
I would have to know more details, and ultimately, I'll have to test it when I get my new display, but an AI answer I got (I don't...
Does MePo 1 pass the HDR metadata, Dolby Vision, HDR10, etc., along to the display when playing 4K UHD Blu-ray discs? If not, are...
I compliment you on the thoroughness of your investigations. (y)
Unfortunately, I don't have any ideas what the problem might be. :(
Perhaps someone else will post with some suggestions. :unsure:
-- from CyberSimian in the UK
I compliment you on the thoroughness of your investigations. (y)
Unfortunately, I don't have any ideas what the problem might be...
Would appreciate it if someone could solve (or point me in the right direction to resolve) this issue.
I have “MultiSeat”...
Hi
This is a general question about OnX.
I have been using the TvWishList plugin for a while and have recently updated (update install) from MP 1.36 x86 to 1.37 x86 and found there seemed to be no Onx menu in the TV guide. I then configured the onx.presets.xml file like I would normally do with updates or fresh installs, but still...
Hi
This is a general question about OnX.
I have been using the TvWishList plugin for a while and have recently updated (update...
Hi
This is a general question about OnX.
I have been using the TvWishList plugin for a while and have recently updated (update...