homeplug (1 Viewer)

smiler3k

Portal Member
January 17, 2008
39
0
Lancashire
Home Country
United Kingdom United Kingdom
I am putting a htpc in my bedroom it will stream live tv from a tvserver and movies and as ethernet realy isnt practical here i was thinking about homeplug and was wondering if any has had any experience with this.
 

joystick

MP Donator
  • Premium Supporter
  • January 26, 2006
    892
    39
    Home Country
    Germany Germany
    yes, I have the devolo dlan (which is homeplug compatible).

    At first I used the 80mb device, but when I swiched my system to HD i bought the 200mb device, wich is working flawless in my config.
    I have a net throughput of about 60mb which is enough for HD videos and Streaming.

    My NAS is located in the basement (Qnap-201) and is connected via a fritzbox 7170 to the homeplug adapter.

    My power lines are about 10 years old, just for info.

    cheers

    joystick
     

    CHli

    Portal Pro
    July 5, 2005
    1,251
    14
    Switzerland
    Home Country
    Switzerland Switzerland
    I'm using the Netgear av 200 and I can stream HD between both. Of course it will be highly dependant on cable length, noise level on the line and cable quality. Good luck with your setup.
     

    joystick

    MP Donator
  • Premium Supporter
  • January 26, 2006
    892
    39
    Home Country
    Germany Germany
    to be on the safe side... if you want to stream HD you should use the 200mb device. I often had stuttering in hd movies with the 85 mbit, thats why I bought the 200mb one.

    But be adviced: those devices (85/200) are not compatible, even though they can be used in parallel.

    cheers

    joystick
     

    Deco

    Portal Pro
    August 26, 2005
    86
    4
    55
    Ireland
    Home Country
    Ireland Ireland
    I'm using Homeplug AV (200mbps) ZyXEL myself (P660HWP router and 2 x PLA-401 adaptors). Router lovely and neat with onboard Homeplug AV but general configuration not very intuitive! PLA adaptors easy to use. Figured might as well go for Homeplug AV even though MP Client is just streaming standard definition TV; AV meant to have improved resilience to noise as well as improved speed.
    Once set up have had no problems at all, adaptors don't get too warm; router gets quite warm.
    AV gives extra headroom for additional MP Clients (hope, hope!!).
    Deco.
     

    Users who are viewing this thread

    Similar threads

    I would have to know more details, and ultimately, I'll have to test it when I get my new display, but an AI answer I got (I don't trust AI and this may not be correct) was that HDR is encoded with the HEVC codec and I know MePo uses the HEVC codec to play 4K UHD Blue-ray discs. So, there is at least the possibility that it will work...
    I would have to know more details, and ultimately, I'll have to test it when I get my new display, but an AI answer I got (I don't...
    Does MePo 1 pass the HDR metadata, Dolby Vision, HDR10, etc., along to the display when playing 4K UHD Blu-ray discs? If not, are...
    Replies
    2
    Views
    817
    I compliment you on the thoroughness of your investigations. (y) Unfortunately, I don't have any ideas what the problem might be. :( Perhaps someone else will post with some suggestions. :unsure: -- from CyberSimian in the UK
    I compliment you on the thoroughness of your investigations. (y) Unfortunately, I don't have any ideas what the problem might be...
    Would appreciate it if someone could solve (or point me in the right direction to resolve) this issue. I have “MultiSeat”...
    Replies
    4
    Views
    839
    Hi This is a general question about OnX. I have been using the TvWishList plugin for a while and have recently updated (update install) from MP 1.36 x86 to 1.37 x86 and found there seemed to be no Onx menu in the TV guide. I then configured the onx.presets.xml file like I would normally do with updates or fresh installs, but still...
    Hi This is a general question about OnX. I have been using the TvWishList plugin for a while and have recently updated (update...
    Hi This is a general question about OnX. I have been using the TvWishList plugin for a while and have recently updated (update...
    Replies
    0
    Views
    545
    So, you're power cycling the TV, but not putting the PC to sleep ? In General => Startup/Resume settings, try checking "Ignore Windows resolution/size changes" In Codecs and Render, try selecting the specific audio device rather than "Default DirectSound device" Just ideas, no guarantee this will do anything. If this doesn't work, I...
    So, you're power cycling the TV, but not putting the PC to sleep ? In General => Startup/Resume settings, try checking "Ignore...
    I'm running MP1 as a client only on this: https://www.amazon.com/dp/B0DZX5DWS5?ref_=pe_123509780_1038749300_t_fed_asin_title&th=1...
    Replies
    4
    Views
    744
    Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in Settings (which somehow I had missed, I think because it wasn't an option previously), and the deleted everything in the Flat-default folder and populated it with my own logos. Works, so far.
    Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in...
    Hi-- I have to revisit an old issue, unfortunately. I just downloaded MP 2.5, a fresh installation, on a new computer (reluctantly...
    Replies
    5
    Views
    2K
    Top Bottom