Hungary
you have always interesting informations. Where are they from? the GA-MA78MG-S2H is not even in Rev. 1.0 available!
Ongoing HTPC Motherboards with HDMI (1 Viewer)
- Thread starter globaldonkey
- Start date
you have always interesting informations. Where are they from? the GA-MA78MG-S2H is not even in Rev. 1.0 available!
After looking at some reviews comparing the Gigabyte and ASUS 780G boards, I ordered a GA-MA78MG-S2H yesterday when Newegg got a new shipment in. It will be delivered on Thursday, so I'll see if it's a revised motherboard.
This is going to be for my first HTPC build and I'm pretty excited. I'm going with a 45W Athlon X2 CPU also, to try and keep power/heat down.
This is going to be for my first HTPC build and I'm pretty excited. I'm going with a 45W Athlon X2 CPU also, to try and keep power/heat down.
I should have my GA-MA78GM-S2H (along with Athlon X2 BE-2350, 2GB Corsair TwinX XMS2 and Akasa Lowprifile cooler) tomorrow.
Also got a Silverstone LC19 on order which should be here in a few days. Looking forward to playing
Also got a Silverstone LC19 on order which should be here in a few days. Looking forward to playing
Picked up my last parts yesterday including the Gigabyte GA-MA78-xxxxx board.
Put it all together except for HDD last night and the motherboard really blew me away. The quality of the build is awesome!
Also, I noticed the HDMI 1.3 certification on their homepage. It has not been there before, and I'm almost sure this will solve the problems with HDMI full hd audio with Power DVD 8.0.
Now I have 1 problem.
The HDD I'm gonna put it is a 500 gb samsung spinpoint with about 4000 gb of files. How can I put a new partition on it (another partition) and keep the data?
(I'm gonna put it in HTPC and install windows xp, media portal etc on the new partition but I still need the files on the other partition from before...
I have partition manager and partition magic but I'm not sure how to do it without risk of losing all the data on its other partition... "logical drive" or not??
Can someone please help me out its the last part of the build.
Put it all together except for HDD last night and the motherboard really blew me away. The quality of the build is awesome!
Also, I noticed the HDMI 1.3 certification on their homepage. It has not been there before, and I'm almost sure this will solve the problems with HDMI full hd audio with Power DVD 8.0.
Now I have 1 problem.
The HDD I'm gonna put it is a 500 gb samsung spinpoint with about 4000 gb of files. How can I put a new partition on it (another partition) and keep the data?
(I'm gonna put it in HTPC and install windows xp, media portal etc on the new partition but I still need the files on the other partition from before...
I have partition manager and partition magic but I'm not sure how to do it without risk of losing all the data on its other partition... "logical drive" or not??
Can someone please help me out its the last part of the build.
Yep, got everything up and running now with the gigabyte board.
Allthough I need some help with the overscan... I run 1920x1080 at 24 hz wich is recommended for my Pioneer plasma (1366x768 native) and it runs fine, allthough ofcourse I get some overscan.
There is a setting for scaling/overscan i cartalyst center but its only highlighted/on when running 1280x720.
How do u fix the overscan ?
Allthough I need some help with the overscan... I run 1920x1080 at 24 hz wich is recommended for my Pioneer plasma (1366x768 native) and it runs fine, allthough ofcourse I get some overscan.
There is a setting for scaling/overscan i cartalyst center but its only highlighted/on when running 1280x720.
How do u fix the overscan ?
try posting your question here: The Official Gigabyte GA-MA78GM-S2H RS780 mATX Thread - Page 49 - AVS Forum
I did, but didnt get an answer...
Anyone good with the catalyst drivers etc here..
also reminder if u want hdmi audio you must install ATI HDMI audio driver... appearently not included on the dvd with the motherboard in some countries!
Anyone good with the catalyst drivers etc here..
also reminder if u want hdmi audio you must install ATI HDMI audio driver... appearently not included on the dvd with the motherboard in some countries!
Users who are viewing this thread
Similar threads
MP1
MP2
MP2 - V2.3
Difference between using specific audio renderer versus "Default WaveOut Device"?
DE
Sorry, it's my fault -- I did not notice that you are using MP2. :(
MP1 has a separate configuration utility, similar to "TV Server Config". I have tried MP2 only a couple of times, and have never used it seriously. I don't know what MP2 supports with regard to adjusting audio delay, but I do know that all of the adjustments of...
Sorry, it's my fault -- I did not notice that you are using MP2. :(
MP1 has a separate configuration utility, similar to "TV...
Hi. I recently upgraded my home cinema AVR which also meant changed from sending audio from my HTPC as 5.1 using optical to 7.1...
Most (all?) small PC cases accept only ITX motherboards, which have only one PCI-E slot. So you could install only one PCI-E tuner card. A quad-tuner card would give you four tuners, but if you wanted more tuners you would need to use the TBS eight-tuner card, or use external tuners, either USB tuners (available with single or dual...
Most (all?) small PC cases accept only ITX motherboards, which have only one PCI-E slot. So you could install only one PCI-E tuner...
I've been using MP2 now for about 3 years:
I really happy with the way it works, although I can think of many great features I'd...
If you remember, I wrote about it when tests because of x86/x64 problems
If you remember, I wrote about it when tests because of x86/x64 problems
Hia all,
So, decided to setup a new client instance and getting fed-up with the tonne of bloatware and cr*p that comes with...
Hi CyberSimian (and others) just a bit along the coast from me (near Exeter) - I know you are very long-standing!
Not going to make this long winded or anything, but just to point out over the @15 years I've overall donated several hundred quid. And I begrduge NONE of it, not a penny - I do wish MP well - 100%. It is an awesome...
Hi CyberSimian (and others) just a bit along the coast from me (near Exeter) - I know you are very long-standing!
Not going to...
ONGGGG term MP user (and donator - why wouldn't you?) and leaving somewhat reluctantly. Few reasons, some that just seem...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings, advanced options, I switched to UNC paths instead of the default RSS, and it's working very well. Sure I had to figure out the paths, but no big deal.
Maybe helpful for someone in the future. Thanks for the...
Ok, so perhaps a solution, but not the "right" solution. On the client, within media portal configuration, under TV settings...
Hi folks. I have an issue with a new install/integration into my mediaportal system. I have a “mediaportal server” which has the TV...