Imput SVideo (1 Viewer)
- Thread starter Vampiro
- Start date
Portugal
Yes. I've done this myself.
Have a look at the Wiki: TV-Engine 0.3/config-TV-Server - MediaPortal Wiki Documentation
Esp.: TV-Engine 0.3/config-TV-Channels - MediaPortal Wiki Documentation
... and specify your question if you can't figure it out
Have a look at the Wiki: TV-Engine 0.3/config-TV-Server - MediaPortal Wiki Documentation
Esp.: TV-Engine 0.3/config-TV-Channels - MediaPortal Wiki Documentation
... and specify your question if you can't figure it out
Users who are viewing this thread
Similar threads
If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24 hours. However...
That is using the "conventional" TV sources, i.e. a DVB-T tuner, a DVB-S tuner, or an analogue tuner. You stated in your other thread that you are using an IPTV source. Perhaps there is a...
If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24...
Is there a limit to recording length? My TVServer recordings all cut off at 3 hours but I can't find a setting anywhere to change...
Greetings Fellow MP'rs.
Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it is set up for use with MediaPortal..? I havebeen using Zap2XML / GraceNote but that just died (for me alone seemingly) and I am out of listings. :( Would appreciate any help - Thanks.
Greetings Fellow MP'rs.
Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it...
Greetings Fellow MP'rs.
Does anyone out there use tvguide.com to access TV listings..? :unsure: If so, can you advise on how it...
Sorry, I didn't get email notifications on these latest replies. I just came here to report I solved the problem after adjusting power settings for "Intel Graphics". I set it to Maximum Performance. I tried many other things so it could be a combination of them, but this was the last thing I did and I haven't had the problem return...
Sorry, I didn't get email notifications on these latest replies. I just came here to report I solved the problem after adjusting...
I'm running MP1 as a client only on this:
https://www.amazon.com/dp/B0DZX5DWS5?ref_=pe_123509780_1038749300_t_fed_asin_title&th=1...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
Some MP2 installers contain three TV Servers:
TVE3
TVE3.5
TvMosaic
If the installer that you used offers you the choice of these three TV Servers, select TVE3. If you selected TVE3.5, run the installer again and select TVE3.
The Kodi plugin is described as being intended for MP 2.5 and TVE3, so it should work. Unfortunately I do...
Some MP2 installers contain three TV Servers:
TVE3
TVE3.5
TvMosaic
If the installer that you used offers you the choice of these...
Hi,
I have read some thread discussions but I still have not understood what is happening.
I have MediaPortal 2.5. To use it...