LEDcontroller: control your LED's & HTPCmonitor: keep an eye on your PC (1 Viewer)

[robbo100]

Orcam,

Thanks for the reply.

Which dll do I change? I thought that LEDcontroller only has a single .exe file rather than any .dll files. Sorry, I am a bit confused.

Rob

 

[D4bFz3awSRYHKjr3]

Next to the exe there should be 2 dll's, tvcontrol and tvlibrary.interfaces, perhaps that's why it doesn't work....

 

[NeoN2k]

Hi Ocram,

Nice tools you made!

Can you probably add support for keyboard-leds? That would be nice, I have only one COM-Port but many old keyboards

NeoN2k

 

[robbo100]

Hi Orcam,

Sorry for the slow reply.

You were correct, there are two .dll files as you said, I was just looking in the wrong place!

I have found the files you specified in the MP directory and copied them into the LED Controller Directory, but unfortunately it has not fixed the problem.

Any other ideas?

Thanks again.

Robbo100

NEON2K,

See post number 48 for how I have used the keyboard LEDs along with Orcam's excellent LEDcontroller.

Rob

 

[robbo100]

Orcam,

Just to let you know, your fix did work. It seemed that when I installed my new router, it gave the PC a new IP address and I forgot that the LEDcontroller software uses the TVServer IP address.

Now fixed

Thanks

Robbo100

 

[Fumes]

I can't seem to get it working with MP 1.2.0.0? I have replaced the two dll-files mentioned earlier without any luck.
I have tested my leds with the "power on" trigger and it's working. It just doesn't seem to register the state of the tuners.
Any ideas?

Btw, I'm on Windows 7 Home Premium x64 using 2 Floppy-DTV (DVB-T) as tuners.

 

[robbo100]

Are you using the right tuner number for each of the tuners? If I remember correctly the tuner number corresponds to that listed in the manual control view in the TVServer Config, as shown here: Manual Control - MediaPortal Wiki

 

[Fumes]

I've tried that but i'm not sure if i entered the right information. Should it be a number? But there's also an option to use it on every tuner wich should work?

 

[robbo100]

Yes, testing using the "any tuner" setup should work best.

 

[Fumes]

Feels like i've tested everything now. Seems like it won't work with 1.2.0.0. Can anyone verify this?