[WiP] madVR support in MP1 (22 Viewers)

[Sebastiii]

@Crix1990 can you try this one after your update ?
Thanks.

Edit guys you can try too for regression

 

[joecrow]

v292 Double fps problem. Sussed it after much reinstalls/updates(LAV, Madvr & grphics driver) to no effect it turned out that at some stage in the past I set the Deinterlacing mode to "Force" in addition to YADIF Software Deinterlacing. Deselecting either fixed it, see screen shots.
Also 3D playback from an inserted disc continues to work (with Madvr 0.91.5, not tried yet with 0.91.7)


UPDATE:-
Can now confirm Madvr 0.91.7 also plays 3D inserted disks in 3D.
One issue I have ran into with this is that sometimes MP comes up with an "Unable to Play-Index" error, well before Passkey has started/finished the decryption scan when Autoplay is set to Play, maybe a race condition there, once the scan is finished I can go to play disk and it works. As a result of that I decided to try and set Autoplay to "Ask" but found that Autoplay settings made in the Default Wide HD GUI are not effective, they can only be changed in MP Config, which I think is not correct and a 2nd issue.

 

[joecrow]

v 293, since I installed this core, yesterday, I have had 2 MP crashes on resume from sleep (yesterday evening and thjis morning) both were after long sleeps, no problem after short sleeps. See attached logs. This is the first time I have seen this for ages, as you may remember when I reverted back to the std. 1.16pr I had no problems also v281, v289-v292 were OK for me in this respect.

 

[Sebastiii]

This is weird, because the change has nothing to do on resume, it just enable fixdwm (for MP refresh rate) for try to know if it solve the issue for @Crix1990
So i think the original issue is always present and trigger randomly

 

[Sebastiii]

When looking the log, it can be the same issue @CypherMK about audio crash.
Does it happen when moving in MP and sound should be present ?

 

[joecrow]

So i think the original issue is always present and trigger randomly

Maybe, though it does seem strange that it is not present for long periods then returns consistently (OK only 2 times so far) after a change.

When looking the log, it can be the same issue @CypherMK about audio crash.
Does it happen when moving in MP and sound should be present ?

Hmm, I will double check next time but I think it happens immediately the GUI becomes active and/or I make a navigation move. Worth noting that from memory with std 1.16pr sounds were not working with the DWHD skin and..... normally when the GUI becomes active after resume from sleep there is no navigation sound on the first move but it is there for the second. On a new MP start I do get a sound on the first move, not sure if that is signifcant but that is what I see/hear.

 

[Sebastiii]

I will try to simulate a audio device remove (or disable) and see how MP react to that

 

[GeYe]

I tried version v293 in some tests and can't see big problems. But i realize that often the OSD is not visible (fast forward, pause, info-button), if i play a video not from beginning.

 

[Sebastiii]

I tried version v293 in some tests and can't see big problems. But i realize that often the OSD is not visible (fast forward, pause, info-button), if i play a video not from beginning.

Need to test that on my own for sure

 

[Sebastiii]

@Crix1990 did you get the time to test ?
Thanks.