[WiP] madVR support in MP1 (19 Viewers)

[Sebastiii]

Ok first is the Auto3D plugin

So, there is new tab now :

I have set it to mode Auto, like 3D setting button on windows is already set to 3D mode.
Then i have set 3D(TV)->2D to switch my beamer to 2D :

Like this i can select 3D MVC mode in auto3D context menu manually (it will set my beamer to Auto and then the detection of 3D MVC is done and working with Exclusive mode).
And i can go back to 2D manually or on stop ti will auto go back to 2D.

I have tested with other mode SBS and TAB and it's working (I can't test 4K to 1080p in this mode but i think beamer or TV will auto switch to that resoluton for MVC).

About the exclusive mode, for sure it's timing related issue, that MPC-HC handle it more faster and surely in threaded mode than MP is from the main thread.
So enabling the 3D option in windows to be always ON permit to save some delay.

I didn't fully test if exclusive is working on current madVR build because i'm using the new one, need to push the code and make an installer but worth a try to test Auto3D with the current build

 

[daWooky]

thanks seb,
i had already tried the 3d switch from windows without those madVR settings set and can confirm u that 3d gets played also with exclusive mode enable but with 3d always enabled on my htpc the normal stuff isnt played nicely as without. and im recently playing around with a new htpc build with a 1050ti and win 1709 fail fall.. there its pretty similar if i set the 3d switch my self. 3d is working with fse enabled like this, but its a complete no go with normal non 3d stuff (mphc and potplayer crashed with it too^^) also exclusive mode seems only possible if i use the dx11 option set from madvr.

 

[Sebastiii]

Hey
Yep seems 17025 has more fix but not perfect
But the point is (at least on my side) if i let 3D mode ON (windows) but beamer or TV to 2D then MP seems to run like normal (like 3D switch off)

Are you able to test this setting ? (Disable fullscreen ....)

 

[Sebastiii]

V361 (OLD) with the new madVR window creation

 

[daWooky]

Yep seems 17025 has more fix but not perfect

yep,i know. regrettably hustle as a service screwed up this time

But the point is (at least on my side) if i let 3D mode ON (windows) but beamer or TV to 2D then MP seems to run like normal (like 3D switch off)

this may dependents on the used tv or device -on my normal htpc (still 1703) the tv dont liked it if i set it to always 3d enabled before (it will look similar like a wrong bit depth is set...) will try it again but i doubt it changed much

Are you able to test this setting ? (Disable fullscreen ....)

can and will soon (and without high hopes^^) but first i gonna try ya new auto 3d addition and creation

 

[Sebastiii]

New madVR version : madVR_0.92.9
Seems not much change and madshi tell us again that Windows 8 is the better OS for madVR

 

[Sebastiii]

yep,i know. regrettably hustle as a service screwed up this time

this may dependents on the used tv or device -on my normal htpc (still 1703) the tv dont liked it if i set it to always 3d enabled before (it will look similar like a wrong bit depth is set...) will try it again but i doubt it changed much

can and will soon (and without high hopes^^) but first i gonna try ya new auto 3d addition and creation

Yep it can be related to RGB / Y 2:2:2 / 4:4:4 or bit, i'm pretty i have seen those bit depth too but not anymore, i'm not sure when or what settings i have change to remove the wrong display.

 

[daWooky]

bet it was a windows update

 

[daWooky]

htpc is occupied atm, but I've already successfully paired it with the tv ..
so a bit about this disable optimization option: (ya made me curious, thx for mentioning it again seb. i've forgotten about it)
tried it and omg, it works - exclusive mode with fall creators and dx9 again with 2d
also tried 3d mvc but that was very strange. the first run has been funny 2d-3d again. on the second try, it was switched correctly and ran correctly for the first time but when I pressed stop madvr crashed, unbelievable. log attached
and surprisingly on additional runs i only had 2d-3d framepacked again....at least also no crash

 

[Sebastiii]

Ok let see what does the attached version
I hope it works for you, i was able to start 3D in exclusive with this version
But still need to test, i have done some cleanup about sometimes loop call, i hope it will not trigger regression
Still on my side D3D11 mode (without exclusive) that give 10bits work pretty good