[WiP] madVR support in MP1 (84 Viewers)

[Sebastiii]

But DXVA2 Native in LAV and D3D11 in madVR works quite good already

 

[daWooky]

Yep lav dxva2 native seems ok but not so sure about dxva2 copy back but overall it looks good and thanks again for fixing the 3dmvc stuff. 3d fp switched right again. not always right but mostly 3d with auto3d also running good too with old htpc now...win1703, new mad/lav, old nvdriver with fse enabled and dx9 lav cb..
Sync was ok and no additionly black screen...so good so far

on my others fall creators htpcs in general it seemed also ok with dx9 cb except on the first video it always opens like in the backround with sound allready started and after some seconds it finally appears....see capture additional starts worked, only on first its bad somehow. same with dx11 with 2 other htpcs with win1709 and sadly it's also quite same with insider too : )

Gesendet von meinem Nexus 7 mit Tapatalk

 

[Sebastiii]

Thanks
Did you try 'X' key or bring something on MP (like CTRL+ALT+ESC) ?
Can you post logs ?
Thanks.

 

[daWooky]

Yep tried that first
X won't work, alt enter also refused, windows key and task works sometimes but I realised I just have to wait some seconds and bling picture
same as in the capture

Gesendet von meinem Nexus 7 mit Tapatalk

 

[daWooky]

log with it and setting screen

 

[Sebastiii]

This sample trigger a D3D device reset, mostly happen when resolution has changed or 3D MVC

[2017-11-12 19:13:17,429] [       0] [ 1cc] - MPMadDshow::MadInit
[2017-11-12 19:13:17,429] [       0] [ 1cc] - MPMadPresenter::Constructor() - instance 0x1dbbc390
[2017-11-12 19:13:17,445] [       0] [ 1cc] - MPMadPresenter::Constructor() Store Device Surface
[2017-11-12 19:13:20,859] [       0] [1f1c] - MPMadPresenterH::SetDeviceSub() device 0x:3366eae0
[2017-11-12 19:13:20,861] [       0] [1f1c] - MPMadPresenter::SetDeviceSub() send subtitle device to C# 0x:3366eae0
[2017-11-12 19:13:20,864] [       0] [1f1c] - MPMadPresenterH::SetDeviceOsd() device 0x:3366eae0
[2017-11-12 19:13:20,865] [       0] [1f1c] - MPMadPresenter::SetDeviceOsd : ForceOsdUpdate
[2017-11-12 19:13:20,865] [       0] [1f1c] - MPMadPresenter::SetDeviceOsd : reduce madVR frame to : 0
[2017-11-12 19:13:20,964] [       0] [1f1c] - MPMadPresenter::ReinitOSD : ReinitOSD for : 1920 x 1080
[2017-11-12 19:13:57,799] [       0] [1f1c] - MPMadPresenterH::SetDeviceOsd() device 0x:0
[2017-11-12 19:13:57,799] [       0] [1f1c] - MPMadPresenter::ReinitD3DDevice : ReinitOSDDevice for : 1920 x 1080
[2017-11-12 19:13:57,799] [       0] [1f1c] - MPMadPresenter::SetDeviceOsd() release m_pMadD3DDev
[2017-11-12 19:13:57,807] [       0] [1f1c] - MPMadPresenterH::SetDeviceSub() device 0x:0
[2017-11-12 19:13:57,810] [       0] [1f1c] - MPMadPresenter::SetDeviceSub() send subtitle device to C# 0x:0
[2017-11-12 19:13:58,192] [       0] [ 9dc] - MPMadPresenterH::SetDeviceSub() device 0x:394a52e0
[2017-11-12 19:13:58,193] [       0] [ 9dc] - MPMadPresenter::SetDeviceSub() send subtitle device to C# 0x:394a52e0
[2017-11-12 19:13:58,196] [       0] [ 9dc] - MPMadPresenterH::SetDeviceOsd() device 0x:394a52e0
[2017-11-12 19:13:58,197] [       0] [ 9dc] - MPMadPresenter::SetDeviceOsd : ForceOsdUpdate
[2017-11-12 19:13:58,197] [       0] [ 9dc] - MPMadPresenter::SetDeviceOsd : reduce madVR frame to : 0
[2017-11-12 19:13:58,429] [       0] [ 9dc] - MPMadPresenter::ReinitOSD : ReinitOSD for : 1920 x 1080
[2017-11-12 19:14:20,761] [       0] [ 1cc] - MPMadDshow::MadStopping start

In above log :
You can see that madVR supply a device : device 0x:3366eae0 (MPMadPresenterH:etDeviceSub() device 0x:3366eae0)
Then, it reset it : MPMadPresenterH:etDeviceSub() device 0x:0
Then, the new device happen : MPMadPresenterH:etDeviceSub() device 0x:394a52e0

And the video start but appear after a while lol. but we can see that madVR window is present on the whole screen (from the madVR stats visible).
So could be nice to know if all video on the first start has the same device reset

And from the timestamp, it seems that when the final device appear then i suppose that it's when the video happen.

You can test with baretail, it follow tail, so you need to share the log folder on another PC and look how it does or put baretail always on top on the same PC to confirm that video movie is displayed when the second final device is present.

Does MPC-HC does the same ? (starting a video with setting fullscreen) ?
Thanks (we can't know if the device is resetted with MPC-HC but still we can see if the video are also long to appear

 

[daWooky]

Yep. 19.14 h timestamp video appears
seems independent from file and also a bit similarly it is with native dxva2 although there it's pretty short but noticeable and also only on the first playing... not compared with mphc so far


Gesendet von meinem Nexus 7 mit Tapatalk

 

[Sebastiii]

Guys
Will build a new version, i hope this one fix the black-screen on stop

 

[daWooky]

new log...and time for dinner

 

[Sebastiii]

Here we go V367