[WiP] madVR support in MP1 (35 Viewers)

[Sebastiii]

Good for V3 and EVR
I don't understand why it failed for TVS and madVR, i didn't spot anything wrong in log.
Can you upload your video for me to test here ?
Thanks.

 

[Sebastiii]

@joecrow
Just a confirmation does it happen for all .flv in TVS ?

 

[joecrow]

@joecrow
Just a confirmation does it happen for all .flv in TVS ?

Yes as far as I have tested and that includes ones I had previously (in an earlier version) played OK.
Will upload the vid to One Drive and PM you the link. In the mean time I will do a system restore to 1.18 final and the non-updated TVS and see how it is from there.

 

[Sebastiii]

Thanks, i have tested flv on my side and it's ok but not sure why it failed only for madVR, does the flv works too in MPC-HC ?

 

[daWooky]

What I would appreciate is some clarification on how the latest Auto3D should work.

I'll make you some screens and a video how its working on my htpc later

Unfortunately if I stop playback of the SBS a command sequence that is triggered to switch the TV back to 2D is prematurely killed before it completes because the TV is triggered (its own Auto detection

does ya tv autodetect sbs and tab stuff? mine does this only with 3d framepacked videos but its not a philips so idk...

 

[Sebastiii]

Me too my projector only detect when it's 3d framepacked
V448 updated in first post, should act like the V3 bin attached earlier but this time it's a full installation

 

[kenwonders]

Ahh sweet sweet stability. I swapped the ram into a different slot and lucky me no more memtest errors. I've been stable for 2 days but with some issues a long the way:

- NVIDIA 390 still causes BSODs with video playback, but can run for ages on FurMark
- NVIDIA 388 is stable, but for an occasional error in madVR after stopping iplayer/ov videos (I will investigate this today with logs)

thank you Seb running 448 today.

 

[Sebastiii]

Thanks guys for testing

 

[joecrow]

Thanks, i have tested flv on my side and it's ok but not sure why it failed only for madVR, does the flv works too in MPC-HC ?

Have PM'd you with link to failing vid, I did not try with MPC-HC as the same vid did work when played via MP Videos using Madvr.
Since using the restore back to 1.18 final everything in TVS plays OK, the problem is gone.
At this point I'm really not sure if the problem was with v447, though certainly the EVR issue looks like it was a real bug, At some point after installing v443 I noticed there was an update pending for TVS, there was a new update in November last year, which I OKed but it also installed Tract and something else that I don't use so I uninstalled those extras and I am very suspicious that something went wrong there to cause the problem. After the restore TVS is showing as the latest version without Track etc but all is working well.
Starting Monday I will again try out the latest from here and naturally let you know how it goes.

does ya tv autodetect sbs and tab stuff? mine does this only with 3d framepacked videos but its not a philips so idk...

SBS/TAB usually no and never with the demos I have but I do have one SBS vid, which it does often autodetect (50-60% of starts I would say) and it appears to work 100% on the Auto3D SBS gui.

 

[Sebastiii]

Yep and i have tested your FLV (thanks) and it works here
What i have noticed in your logs is somehow TVS has a lot of TextureMemoryEx and i'm thinking that maybe when this is running something failed somehow