need dual HDTV-S PCI or PCIe tuner-card (2 Viewers)

[ralphgross]

I tried here to download: ASUSTeK Computer Inc. - Motherboards- ASUS M4A78LT-M
There is no download possible.

I tried update in system panel ==> no newer drivers found
I reinstalled the drivers from the utility CD ==>no change

It's a brand new mainbord I got recently...

Did the logfiles reveal something ??

 

[Spooky]

Brand new? This is a rather "old" motherboard, with an older 760G chipset, which has a Radeon HD 3000 on it.
Try these drivers: ATI Radeon
Uninstall the old drivers first.

 

[ralphgross]

found the drivers at ASUS-are alittle bit hidden-will update next

For me and mediaportal it should be OK-right ? I set up one with MP before (windows 7+ Hauppauge) and it works fine.

 

[Spooky]

found the drivers at ASUS-are alittle bit hidden-will update next

The ones from ASUS are relatively old as well. Try those from the AMD website first.

For me and mediaportal it should be OK-right ? I set up one with MP before (windows 7+ Hauppauge) and it works fine.

Generally, you should be ok. Decoding of 720p and 1080p content on the GPU should work as well, however, high quality deinterlacing of 1080i content on the GPU might be a problem.

 

[ralphgross]

MANY SPOOKY,

first time I see HDTV on my PC.

high quality deinterlacing of 1080i content on the GPU might be a problem

How would this show and do you know how to avoid this ?

Danke nach Österreich !

Gruß Ralph

 

[Spooky]

No problem


Hm, there are not that many 1080i channels in the german area. Servus TV HD is one I can think of. You can simply tune to it and look what happens, i.e. look at the quality of the picture and the framerate (with Shift-1, should be 50 FPS).

 

[ralphgross]

HI spooky,

I'm watching servus tv hd without problems. I'm adding a logfile. Average fps is 24,99. Let me know what you think. I cn not see if it is interlacing...

Thanks a lot.

Ralph

 

[mm1352000]

Hi again Ralph

Yes, Servus is interlaced - that is good!

2011-07-19 20:16:49.984375 [Info.][MPMain(1)]: TVHome.ViewChannelAndCheck(): View channel=Servus TV HD Deutschland

.......
2011-07-19 20:16:52.109375 [Info.][MPMain(1)]: TsReaderPlayer: OnVideoFormatChanged - streamtype=H264 resolution=1920x1080 aspect ratio=16:9 bitrate=15000000 isInterlaced=True

mm

 

[Spooky]

But he should have 50 FPS instead of 25. It looks like only Single Field Deinterlacing was in use.

ralphgross: what is your exact decoder configuration right now, in every tab? (maybe post screenshots).

 

[ralphgross]

Hi SPOOKY sorry for the delay:

I wanted to place it here, see attachment.

I got another issue. I can use my MCE remote to get the PC in standby, but cannot wake it up from there, any hints (should I open another request ?

Ralph