- January 21, 2008
- 5
- 0
:sorry: I figured out a different problem than this one, so I have started a new thread.
Thanks for your support.
Thanks for your support.
Pinnacle PCTV HD Pro stick - no signal (1 Viewer)
- Thread starter foxtrot200
- Start date
- January 28, 2008
- 2
- 0
- Home Country
-
United States of America
I have the pro stick as well. Do you have the graphing filters done?
- January 21, 2008
- 5
- 0
- Thread starter
- #3
Graphing filters? You mean with GraphEdit? I tried that and I went along with the tutorial as best as I could but I can't understand it. I just need the right configurations and I should be set.
I just tried to watch tv now but I got the message displayed in the picture below.
My configurations for the TV card and codecs/decoders are here:
General Television section
MPEG-2 Video Decoder: Pinnacle MPEG 2 decoder
Audio Decoder: Pinnacle Audio Codec
Audio Renderer: Realtek AC97 Audio (Default audio card)
Deinterlace Mode: Best
Default Zoom mode: Normal
Television>TV Cards>Pinnacle PCTV 800e>>Audio Mapping
CVBS#1: CVBS #1;Audio-in #1
CvBS#2: CVBS#2;Audio-in #2
SVHS: SVHS #1;Audio-in #1
RGB: RGB #1;Audio-in #1
I don't know much about this. I know what everything is but I have no Idea what it does. It's all gibberish to me. If someone could help, it would be greatly apreciated.
I just tried to watch tv now but I got the message displayed in the picture below.
My configurations for the TV card and codecs/decoders are here:
General Television section
MPEG-2 Video Decoder: Pinnacle MPEG 2 decoder
Audio Decoder: Pinnacle Audio Codec
Audio Renderer: Realtek AC97 Audio (Default audio card)
Deinterlace Mode: Best
Default Zoom mode: Normal
Television>TV Cards>Pinnacle PCTV 800e>>Audio Mapping
CVBS#1: CVBS #1;Audio-in #1
CvBS#2: CVBS#2;Audio-in #2
SVHS: SVHS #1;Audio-in #1
RGB: RGB #1;Audio-in #1
I don't know much about this. I know what everything is but I have no Idea what it does. It's all gibberish to me. If someone could help, it would be greatly apreciated.
Attachments
- January 28, 2008
- 2
- 0
- Home Country
-
United States of America
I dont know much about it either. If I could take a look at your graphing file I might be able to get a better grasp. There is also a forum on here specifically for atsc cards and support.
- January 21, 2008
- 5
- 0
- Thread starter
- #5
ok, thanks, I'll start a topic in that forum and get this one removed.
Users who are viewing this thread
Similar threads
Fixed, I think.
Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that these were never part of the install package itself, but rather downloaded during the install, and that link no longer exists. Shame that the installer doesn't indicate this.
Last time when I installed the...
Fixed, I think.
Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that...
Hi all,
I've recently retired my MP2 setup for my main HTPC and gone back to separates, but I wanted to retain the ability to play...
That did it, thanks.
That did it, thanks.
Before you create this bug report:
Make sure that your system (windows, codecs and drivers) is up to date, matching the...
I compliment you on the thoroughness of your investigations. (y)
Unfortunately, I don't have any ideas what the problem might be. :(
Perhaps someone else will post with some suggestions. :unsure:
-- from CyberSimian in the UK
I compliment you on the thoroughness of your investigations. (y)
Unfortunately, I don't have any ideas what the problem might be...
Would appreciate it if someone could solve (or point me in the right direction to resolve) this issue.
I have “MultiSeat”...
I got a similar error yesterday just when a watched episode ended...
Didn't copy the logs unfortunately but now i'm in a weird situation. Trakt website shows that episode as watched, but in onlinevideos (where i watched that episode) it still is not flagged as watched.
The watched.json doesn't contain that episode but i think it...
I got a similar error yesterday just when a watched episode ended...
Didn't copy the logs unfortunately but now i'm in a weird...
I have an issue that started in 1.37 and so I updated to 1.38 and updated all my installed plugins but the issue has continued. My...
- Sticky
intentionally left blank
intentionally left blank
Skin Properties MediaPortal 1
This thread is intended for all active/ongoing Skin Designers to find out about the available skin...