SAF v4.00 ''stable'' (StandAlone Filters) - DXVA ready (H.264 and VC-1). (8 Viewers)

[hoborg]

By little trick you can configure audio filter inside MediaPortal now!

Please give us more input!

Look again on first page - "How can i configure audio output?"

To all - can anybody look on this thread and confirm if have such problem too?
https://forum.team-mediaportal.com/...nd-movie-picture-44990/index2.html#post321111

If yes please post it in to this "bug" report here:
https://forum.team-mediaportal.com/1-0-rc3-svn-builds-288/1px-border-around-video-47773/

This issue is realy ugly and if more people report it, there is a bigger hope it will be fixed.
Thanks.

 

[armandp]

By little trick you can configure audio filter inside MediaPortal now!

Please give us more input!

I was wondering about this little trick - are you referring to configuring the MPC Audio Decoder(~= MPA) within mediaportal? I like to know the trick as I use a codec setup i control myself similar to what SAF is setting up but the MPA configuration isn't showing up (i removed the original MPA and replaced it with MPC Audio Decoder.)

 

[hoborg]

By little trick you can configure audio filter inside MediaPortal now!

Please give us more input!

I was wondering about this little trick - are you referring to configuring the MPC Audio Decoder(~= MPA) within mediaportal? I like to know the trick as I use a codec setup i control myself similar to what SAF is setting up but the MPA configuration isn't showing up (i removed the original MPA and replaced it with MPC Audio Decoder.)

You need to modify registry. Check PM.

 

[robhawk]

Please give us more input!

I was wondering about this little trick - are you referring to configuring the MPC Audio Decoder(~= MPA) within mediaportal? I like to know the trick as I use a codec setup i control myself similar to what SAF is setting up but the MPA configuration isn't showing up (i removed the original MPA and replaced it with MPC Audio Decoder.)

You need to modify registry. Check PM.

Could i also get this pm ? thx in advance!

ps: It would be a shame if u do not continue this very nice project!

 

[tourettes]

I also found this thread on doom9 that suggests maybe activating the ffdshow subtitle filter solves some problems with qdvd?

It fixes it as it will disable the HW acceleration

 

[tourettes]

Some DVD's navigation simply doent's work when using MS DVD navigator. I have few such DVD's.

Actually its not the DVD navigator where the issue comes. The issue is coming from the fact that DVD navigators doesnt seem to be compatible with different MPEG2 codecs that they have intend to be working.

So you shouldnt be mixing DVD navigator with different MPEG2 codecs. Cyberlink one should be used with Cyberlink mpeg2 codec. Same goes with the MS DVD Navigator, it should be used only with MS MPEG2 code (wich is only available in the Vista).

In Vista MS DVD Navigator + MS MPEG2 codec combination works perfectly with every single DVD I have tested, where as MS DVD Navigator and Cyberlink MPEG2 codec doesn't. This is the reason why MP config also warns about mixing navigators and codecs.

 

[hoborg]

Some DVD's navigation simply doent's work when using MS DVD navigator. I have few such DVD's.

Actually its not the DVD navigator where the issue comes. The issue is coming from the fact that DVD navigators doesnt seem to be compatible with different MPEG2 codecs that they have intend to be working.

So you shouldnt be mixing DVD navigator with different MPEG2 codecs. Cyberlink one should be used with Cyberlink mpeg2 codec. Same goes with the MS DVD Navigator, it should be used only with MS MPEG2 code (wich is only available in the Vista).

In Vista MS DVD Navigator + MS MPEG2 codec combination works perfectly with every single DVD I have tested, where as MS DVD Navigator and Cyberlink MPEG2 codec doesn't. This is the reason why MP config also warns about mixing navigators and codecs.

Well, that is not true in my case. I have two DVD's, witch is not working on Vista too, but working under Power DVD.

 

[sloty32]

Hi,

would love to know how to do the reg trick, should be explained on the first page, dont think its so secrect u need to pm everybody

sloty

I was wondering about this little trick - are you referring to configuring the MPC Audio Decoder(~= MPA) within mediaportal? I like to know the trick as I use a codec setup i control myself similar to what SAF is setting up but the MPA configuration isn't showing up (i removed the original MPA and replaced it with MPC Audio Decoder.)

You need to modify registry. Check PM.

Could i also get this pm ? thx in advance!

ps: It would be a shame if u do not continue this very nice project!

 

[hoborg]

Hi,

would love to know how to do the reg trick, should be explained on the first page, dont think its so secrect u need to pm everybody

sloty

You need to modify registry. Check PM.

Could i also get this pm ? thx in advance!

ps: It would be a shame if u do not continue this very nice project!

This "trick" is includet in SAF, you dont need it if you install latest SAF...

 

[akajester]

removed old SAF and installed the new one. something went wrong in removing 2.3 and adding 2.5, but an uninstall, reboot and reinstall fixed it. Awesome!
Thanks for all your hard work and dedication! Now that I figured out how to remove subs and re-encode I'm on my way to a perfect HTPC. now if only I could get my HDTV wonder card working in MP. That's another project.