software to send analog to iptv server (1 Viewer)

spartintv

New Member
January 10, 2020
7
0
44
Home Country
United States of America United States of America
does anyone know of a software like media portal that will allow me to send streams over the net to my server .
 

spartintv

New Member
January 10, 2020
7
0
44
Home Country
United States of America United States of America
I have access to analog and clear qam over analog and media portal would be awesome if I could send the streams where I wanted them to go . I have been looking for months
 

mm1352000

Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Hello!

    I have access to analog and clear qam over analog
    Hmmm. I'm a bit surprised, for 2 reasons:
    1. My understanding was that analog cable is not very common - in fact, quite rare - the USA now.
    2. Clear QAM is not analog. It is unencrypted digital cable.
    Perhaps you could clarify who your cable provider is, and which package/tier you have?
     

    spartintv

    New Member
    January 10, 2020
    7
    0
    44
    Home Country
    United States of America United States of America
    I am still on a analog cable system, after a lot of research I have learned that clear qam can be transmitted over analog or digital . I am not 100% certain what the clear qam is over analog BUT I have a TBS tuner card for clear qam and it will not tune in any channels but I can use the Hauppauge USB 955Q which is for ATSC and NTSC and I can tune in all the analog and clear qam.
    MY issue is I need some way to manage these channels off these tuners and send to my IPTV server software
     

    spartintv

    New Member
    January 10, 2020
    7
    0
    44
    Home Country
    United States of America United States of America
    thanks AJS but that just shows you who is connected to your media portal sever ,
     

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    I am still on a analog cable system...
    Honestly, this still doesn't really make sense to me, because I've never heard of "clear QAM over analog". If we assume that your channels are simply standard analog cable then perhaps we can make some progress.

    MY issue is I need some way to manage these channels off these tuners and send to my IPTV server software
    It's very hard to help without more specific details about your requirements and the "IPTV server software" you keep referring to. For example:
    • How does the software injest streams?
    • What stream types (eg. RTSP, M3U8 etc.) and media formats (eg. h.264/AVC, MPEG 2 etc.) does the software support?
    • Are you only wanting to "send streams" over a local network (LAN), or do you have to send over the internet?
    • How will the software tell MediaPortal which channel to stream?
     

    spartintv

    New Member
    January 10, 2020
    7
    0
    44
    Home Country
    United States of America United States of America
    just assume they are analog cable ,
    I will be sending over the net, my server software accepts multiple formats like below …...H.264 or H.265 …..
    to break it down , im going to have about 80 tuners , where they be dual tuners , quad , even octo tuners ive seen , ill have to have a tuner for each channel.
    if these was digital channels prob would not be a issue but where they analog NTSC format I cant seem to find software to manage the streams ,
    Media Source

     

    spartintv

    New Member
    January 10, 2020
    7
    0
    44
    Home Country
    United States of America United States of America
    you know what I think Im looking for software encoding maybe
     

    mm1352000

    Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    I will be sending over the net
    ...
    to break it down , im going to have about 80 tuners , where they be dual tuners , quad , even octo tuners ive seen , ill have to have a tuner for each channel.
    These are red flags for me. Sounds like you intend to stream your cable provider's channels to other people via the internet. I'm not interested in enabling anybody to do that.
     

    Users who are viewing this thread

    Similar threads

    MP1 MP2 IPTV in New Zealand DE
    that will only work if the username+password is in the m3u8 url. I have one like that and it works pretty ok
    that will only work if the username+password is in the m3u8 url. I have one like that and it works pretty ok
    I would love to get IPTV working on my Mediaportal. I have the TV server and three clients working great, but a recent power supply...
    Replies
    8
    Views
    611
    Hi, First off: there are some issues with the latest Mediaportal (32bits vs 64bits), so that is one of the issues you're stumbling with. If you take the previous version (1.31) it should work as expected. For IPTV there is also a different option (with different pros and cons): Onlinevideos. I'm using that sometimes for my IPTV as...
    Hi, First off: there are some issues with the latest Mediaportal (32bits vs 64bits), so that is one of the issues you're stumbling...
    Hi I am trying to play a m3u file from my IPTV provider, but when I try to install the TV part of Media Portal v1.3.2 I get an...
    Replies
    1
    Views
    591
    Didn't know computers are available in Canada's jails... :p
    Didn't know computers are available in Canada's jails... :p
    Hi folks, basically I have this m3u list with links I am trying to scan with the TV configuration tool but all the channels even...
    Replies
    5
    Views
    509
    That's great. Glad there is no issue.
    That's great. Glad there is no issue.
    I am in the process of moving my media portal installation to a new PC running Windows 11. I open TV-Server configuration go to TV...
    Replies
    65
    Views
    5K
    Isn't this normal? I mean perhaps you should first do some config before you can start using mediaportal?
    Isn't this normal? I mean perhaps you should first do some config before you can start using mediaportal?
    I recently move to Los Angeles, California and downloaded & installed Media Portal 1.32 pre Release, to find out the programs media...
    Replies
    1
    Views
    735
    Top Bottom