TV tuner for mpeg4 chanels (2 Viewers)
- Thread starter lcoivera
- Start date
- September 1, 2008
- 21,578
- 8,227
- Home Country
-
New Zealand
Hi lcoivera
I think the card that you mentioned only supports DVB-T, not analog. Hardware encoding doesn't apply for DVB-T - only for analog. As I said in my previous post, almost any DVB-T card is okay. You only need to be more careful if you buy an analog tuner.
mm
I think the card that you mentioned only supports DVB-T, not analog. Hardware encoding doesn't apply for DVB-T - only for analog. As I said in my previous post, almost any DVB-T card is okay. You only need to be more careful if you buy an analog tuner.
mm
Users who are viewing this thread
Similar threads
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine.
Can you copy the created ts file(located in your timeshift folder) somewhere else while in channel preview and try to play it in VLC or MPC-HC?
PS: You can also try to make short record
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine...
I've been successfully using MediaPortal1 and TV Server 1.17 on Win7 for years, using first a HDHomerun tuner, when that died, a...
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a DVB-T2 tuner (a TBS 6284) :(, but succeeded when I used a DVB-T tuner (a Pinnacle 2000i) :). Obviously the Pinnacle found only those channels broadcast in DVB-T MUXes (in the UK we have both DVB-T MUXes and...
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a...
Hi all
Running 1.7.1.0 TV Server as part of a full upgrade to MP2 2.5 setup
After some problems with retuning (solved -...
The issue must be in the TBS 5520 driver.
There is an insane 1 hour long response delay of BDA call (IKsPropertySet) to set TonesState properties.
The same problem is in SignalCheck (dvb: LockInOnSignal ok). This is done by BDA call IBDA_SignalStatistics.get_SignalLocked.
The server is unable to terminate due to ongoing BDA signal...
The issue must be in the TBS 5520 driver.
There is an insane 1 hour long response delay of BDA call (IKsPropertySet) to set...
I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
It should work, but the error is in something else, but it is not yet clear what.
It should work, but the error is in something else, but it is not yet clear what.
I have MP1 TV Server 1.30 installed on Windows Server 2012R2 (with some bits added for tuner support). MP Server versions have...
It took a while but loading the three updates and waiting, (I wandered off doing other things), while the Win 7 searched for updates eventually brought about 170 available updates. I picked the latest, largest and Cumulative ones and everything burst into action enough to re-install MediaPortal 1.33 which is running very well. I let...
It took a while but loading the three updates and waiting, (I wandered off doing other things), while the Win 7 searched for...
Hi
Running MP1 - 1.39 for long while, no issues.
10th April [same time as 2024-KB5037036 Cumulative Update for .NET Framework...