Video jerks (1 Viewer)

Thread starter JeanCC
Start date January 6, 2005

JeanCC

Portal Member

January 6, 2005

I experienced video jerks (picture freezes a while every 10 sec) both on DVD and TV playing. I found out that it was my virusscanner (McAffe). When I disabled the outgoing files scan (who cares?), everything was fine again.
Love to help.

underdog

Guest

January 21, 2005

GOOD POINT!!!! Didn't think of that.

Thanks

You must log in or register to reply here.

Users who are viewing this thread

Similar threads

MP1 MP2 Picture-in-picture DE

Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many tries, and it’s not clear what I am doing that makes it work on those occasions when it does. Cannot find guidance on the site. Thanks, N. Again, if anyone knows how to do this, would be much...

Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...

Replies: 0

Views: 1K

July 23, 2025

Nordfinn

MP1 MP2 Issue after replacing tuner DE

Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine. Can you copy the created ts file(located in your timeshift folder) somewhere else while in channel preview and try to play it in VLC or MPC-HC? PS: You can also try to make short record

Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine...

I've been successfully using MediaPortal1 and TV Server 1.17 on Win7 for years, using first a HDHomerun tuner, when that died, a...

Replies: 4

Views: 2K

January 15, 2025

Pablik

MP1 MP2 Unable to instal either MP1 or MP2 DE

Hello, Name need to be the same as computer name. Also, logs could be useful.

It is a bit of a long story! I successfully installed MP2 on my old PC as client/server with client on my laptop to confirm my...

Replies: 2

Views: 834

June 21, 2025

framug

MP1 MP2 1.34 Cannot use MP as source for LS11000 laser projector DE

When my AVR bit the dust recently I took the opportunity to upgrade my projector to an LS11000 to gain 4K. Install went fine until I switched to my HTPC which is my primary source. When I switch to the HTPC the screen goes blank for a long time and then I have sound, no picture, and in the lower left hand corner: "Source: HDMI 1 Not...

When my AVR bit the dust recently I took the opportunity to upgrade my projector to an LS11000 to gain 4K. Install went fine until...

Replies: 0

Views: 717

August 4, 2024

errfoil

MP1 MP2 1.34 UHD Blu-ray "Cannot Play Index" error DE

@Pablik I finally got back to this, and I got it working. What I did was this. I intended to copy the UHD-BR disc to my local hard drive, so I put the disc in the drive, and then brought up MakeMKV. In MakeMKV I went through the initial steps to copy the UHD-BR disc to my drive, and while MakeMKV was parsing the disc, I noticed a...

@Pablik I finally got back to this, and I got it working. What I did was this. I intended to copy the UHD-BR disc to my local hard...

I just uninstalled AnyDVDHD due to RedFox being no longer reachable, and I have taken the MakeMKV route described in this thread...