General talk regarding our HTPC-software MediaPortal 1 takes place here.
There was a plugin that did that. I can not remember exactly what is was called. The bad thing about it was that if you played a movies and then paused them and walked away the screen saver would never come on. Other then that it worked fairly well and I did use it with RC2 before switching from Mediaportal back to XBMC.
There was a plugin that did that. I can not remember exactly what is was called. The bad thing about it was that if you played a...
Hi all,
I upgraded from 0.2.3.0 to 1.0RC2 about 5 weeks ago, and have recently wondered what happened to the setting that...
Near the top of your MediaPortal.log file, ypu should see a line like this:
20010 is the SVN revision.
I like your idea of showing it in the HELP area.
Near the top of your MediaPortal.log file, ypu should see a line like this:
20010 is the SVN revision.
I like your idea of...
It is probably staring me in the face, but I would really appreciate if someone could tell me how to find the SVN revision I have...
Interested in this, sounds like what i want to do.
Is runmodule in batch mode the best way to do it? Might try this out. What doesn't load if you don't make explorer load? You mention sound and graphics drivers, so you have to make it load each driver?
Also can you upload your customized login + bootscreens? I'm using one from the...
Interested in this, sounds like what i want to do.
Is runmodule in batch mode the best way to do it? Might try this out. What...
I'm not sure exactly how everyone likes their HTPC set up, but I figured some people would like to know the way I did it. This...
Hi, if using a remote, just map the volume button to your receiver and that then controls the sound.
Uninstall it, run filmerit (link in signature) use padlock button to unlock for repair function, reinstall PowerDVD after a reboot, i really do have sound issues with PDVD audio, so i tend to use the ffdshow audio as my codec choice...
Hi, if using a remote, just map the volume button to your receiver and that then controls the sound.
Uninstall it, run filmerit...
i have a few problems wich i need help with.
1: when playing a movie in MP. everything goes well. but when i want to stop the...
Good idea - but who is caring about updating the list? Do you think about haveing an internet URL to get newest lists?
Good idea - but who is caring about updating the list? Do you think about haveing an internet URL to get newest lists?
Hi :)
I have had many users in Denmark crying over the confusing setup in Media portal. Many users find it very hard to set...
I did but it didnt work until i did a full scan over both cards - things seem to be fine now although it is still a bit fussy with trying to stream around the network to "MP TV Client" and MP - but its working!
I did but it didnt work until i did a full scan over both cards - things seem to be fine now although it is still a bit fussy with...
I have two DVB-C Cards in my MediaPortal setup both have been found by the app fine but it would seem that i cant use both - it...
I have a similar setup and this is no problem.
I have Sky Sub x 2, Freesat, FTA Sat and DVB-T
First the card order is handled under TV Server-><Servername> in my case are have the Freesat, FTA Say, Sky STBs and DVB-T - this gives me the sources with best quality 1st going to the worst (very bad TV signal here)
You will need...
I have a similar setup and this is no problem.
I have Sky Sub x 2, Freesat, FTA Sat and DVB-T
First the card order is handled...
I am using RC2 no svn's
I have a floppydtv-s2 with cam and UK sky sub , I also have a pinnacle 7010i with one feed from my sky...
There is a page in the manual explaining a method to use a shared database.
If you basically use that process to put your database in it's own location (folder), the you just need to point a new installation to that folder again.
There is a page in the manual explaining a method to use a shared database.
If you basically use that process to put your database...
can i uninstall and reinstall MP without losing my settings in MP?
i need to reinstall MP but i don't want to lose my settings...
This is an old topic, see also this thread, but I just wanted to check if there's any chance of getting this fixed in shares view too. In the database driven "title" view I can not (as far as I know) organize my movies in a folder structure, so I prefer using the shares view, but then I don't see the coverart for the selected movie.
This is an old topic, see also this thread, but I just wanted to check if there's any chance of getting this fixed in shares view...
This is an old topic, see also this thread, but I just wanted to check if there's any chance of getting this fixed in shares view...
I have the same TV (well, M87, but I think its 99% the same) and the onyl flickering I have is with 24Hz, but luckily for me Samsung are fixing that soon! (new motherboard for the TV)
I have the same TV (well, M87, but I think its 99% the same) and the onyl flickering I have is with 24Hz, but luckily for me...
I have my HTPC connected to a Samsung LE40M86BD full HD TV via HDMI. The picture quality is great after I managed to get perfect...
Hio I am using MP V1rc02 and I like it more every day.
A couple of times I saw MP freeze during a fast forward while playing.
The image in this operation is very jumpy and not fluid like I am used to from oher players.
But anyway the most concerning is the freezing.
I have to kill MP manually.
The watchdog does not...
Hio I am using MP V1rc02 and I like it more every day.
A couple of times I saw MP freeze during a fast forward while playing...
Hio I am using MP V1rc02 and I like it more every day.
A couple of times I saw MP freeze during a fast forward while playing...
Hi
I have my MP system working quite nice.
Now for a better WAF
I woul like to be able to slechht the shoutcast plugin and the jump right to the favorites.
Has anyone a suggestion to do so?
I have the shortcut plugin installed and cyberdisplay for he dispay of the HTPC.
Thad would easyly navigate that way without TV screen...
Hi
I have my MP system working quite nice.
Now for a better WAF
I woul like to be able to slechht the shoutcast plugin and the...
Hi
I have my MP system working quite nice.
Now for a better WAF
I woul like to be able to slechht the shoutcast plugin and the...
Actually, I was trying to allow for the TV server and Media db being on separate machines... I was looking at the quick and dirty result first, if TVServer was present, then auto select that machine, unless you wanted to change it by browsing to another machine which might hold the media database (or select local machine as db...
Actually, I was trying to allow for the TV server and Media db being on separate machines... I was looking at the quick and dirty...
Ok I am building a media server to store all my movies and music and have a question about the IMDB info
I will have 2 media...
So, when I first got the HDhomerun and was using Mediaportal 0.2.3 everything worked wonderfully. However; after the driver and firmware updates and also my cable company adding more HD channels...things arent working so well. I am not able to see the majority of the unencrypted HD channels through mediaportal. I can still see them...
So, when I first got the HDhomerun and was using Mediaportal 0.2.3 everything worked wonderfully. However; after the driver and...
So, when I first got the HDhomerun and was using Mediaportal 0.2.3 everything worked wonderfully. However; after the driver and...
After spending two days trying to get my friends FireDTV S2 to work on high symbolrate (30000) HD-channels, I can't recommend them. Hopefully it will work with future firmware-upgrades and/or MediaPortal-versions.
Technotrend S2-3200 is my solid recommendation, works very well.
After spending two days trying to get my friends FireDTV S2 to work on high symbolrate (30000) HD-channels, I can't recommend them...
What ist best dvb-s2 hdtv (intenal or external) for mediaportal thnx m
The title says it all. When I adjust the volume when listening to radio or music the screen becomes active. How can I prevent that from happening ?
After one minute the screen blanks and the monitor shuts down to standby mode. There must be a way to keep it there.
Do I have to change the remote mappings ? I am using the...
The title says it all. When I adjust the volume when listening to radio or music the screen becomes active. How can I prevent that...
The title says it all. When I adjust the volume when listening to radio or music the screen becomes active. How can I prevent that...
no, i installed the "normal" driver. and i have only one installed. no unknown entry.
did u deleted the cards in mp for testing?
no, i installed the "normal" driver. and i have only one installed. no unknown entry.
did u deleted the cards in mp for testing?
I have question its working Skystar HD2 on mediaportal thnx m
Hello.
Just try SUPER!
SUPER © .
This FREE tool can convert nearly every file format to nearly every format.
... But if subtitles are supported, ... i don't know.
Hello.
Just try SUPER!
SUPER © .
This FREE tool can convert nearly every file format to nearly every format.
... But if...
The title pretty much tells the story :-) However i would also like to keep the subtitles. Anyone that can point me in the right...
Hi!
I use the Mediaportal only as a media server without any TV functionality, but I would like to use the EPG solely as a TV guide. Would that be possible to achieve? I understand that I have to use some sort of xmltv grabber because it obviously won't be possible to grab any DVB EPG without a TV card.
Regards,
PK
Hi!
I use the Mediaportal only as a media server without any TV functionality, but I would like to use the EPG solely as a TV...
Hi!
I use the Mediaportal only as a media server without any TV functionality, but I would like to use the EPG solely as a TV...
I used to have similar problems with both live/recorded tv and videos. Someone in these forums helpfully suggested it may have been my wireless keyboard/mouse interfering sending occasional signals to the remote receiver - now I keep my keyboard/mouse unplugged and haven't had the problem since. Maybe give this a go if you've got...
I used to have similar problems with both live/recorded tv and videos. Someone in these forums helpfully suggested it may have been...
Hi,
Need some advice. was watching a HD .mkv Movie last night and about every 20 mins it would pause and skip back 5 or so...
As I said on my first post, everything plays fine on Windows Media Player, the problem only happens in MediaPortal.
So, I have haali and everything Codec related apparently installed ok.
I also have ffdshow and PowerDVD Ultra 8 installed, and both works under WMP and MP.
As I said on my first post, everything plays fine on Windows Media Player, the problem only happens in MediaPortal.
So, I have...
Hi all,
I've got a few random videos that are of type .mkv. How can I get MP to play these files (as it currently wont despite...
I think BASS player can do bit perfect but I suspect there is a bug in MP which means it fades in music at the beginning of tracks - even when MP is set in its options not to fade in.
I can play DTS tracks in the BASS Player but the first five seconds make a horrible hissing noise then after they play perfectly. I suspect that the...
I think BASS player can do bit perfect but I suspect there is a bug in MP which means it fades in music at the beginning of tracks...
So Mediaportal 0.2.3 has an option for 'internal dshow player' along the BASS player. Is there a way to enable this option in...
Hi Isandini,
we have to consider that priority is a relative thing. If there is nothing elso to do for the PC TV Server get full power. But when there are som e things in the background like extern EPG via Internet or other works it can be better to have TV Server higher priority to hav e no stuttering for example. Realtime tasks...
Hi Isandini,
we have to consider that priority is a relative thing. If there is nothing elso to do for the PC TV Server get full...
Hello Mediaportalists,
In addition to my single-seat HTPC, I am running a little file server in the house, on which I also put...
If you are using TV-Server, then you can't disable time-shifting.
Regards
Seidelin
If you are using TV-Server, then you can't disable time-shifting.
Regards
Seidelin
Hi,
i don't use it and it seems to slow the zapping channels. I don't see any option to disable it in the configuration tool...
Yes, as long as they are unique channels only assigned to webepg and dvb epg grab is disabled for those channels, there should be no problem doing this.
Regards
Yes, as long as they are unique channels only assigned to webepg and dvb epg grab is disabled for those channels, there should be...
Just wondering.
Is it possible to get the guide with the webEPG once a week (so it gets all data for the next 2 weeks) and load...
Im getting an iphone and found this amazing application and kit to allow an iphone to control, sky,tv,etc.
Does anyone know how this would work with media portal?
www.airremote.com
Im getting an iphone and found this amazing application and kit to allow an iphone to control, sky,tv,etc.
Does anyone know how...
Im getting an iphone and found this amazing application and kit to allow an iphone to control, sky,tv,etc.
Does anyone know how...
LOL do you mean Star Craft 2???
Im waiting for that too hehe... but probably the wrong place for this question.
LOL do you mean Star Craft 2???
Im waiting for that too hehe... but probably the wrong place for this question.
can you help me to choose a graphic card which can play SC2.It is said that SC2 requires a high demand of computer
No unfortunately I didn't get it to work in VMware. Infact I moved over to MythBunu as I had so many problems with MediaPortal being so unstable, even now I am still not satisfied.
Now I have bought a PS3 which will give me Blueray, upscaling DVD, AVI, WMV,MP3 etc, a nice interface and easy to use (plus good games) . I will be...
No unfortunately I didn't get it to work in VMware. Infact I moved over to MythBunu as I had so many problems with MediaPortal...
Hi,
I have been trying to get TV Server to work in VMware Workstation 6.2.
The install works fine but when I come to scan for...
Advanced language
After changing the language to Greek under the advanced language tab in XP, everything works great.
Advanced language
After changing the language to Greek under the advanced language tab in XP, everything works great.
Hi,
I'm trying to show Greek subtitles, both with normal .xvid movies as well as .mkv movies.
I have configured as follow...
Added to SVN... maybe I dont like kalakukko but prefer the reindeer? :) Most likely I have just missed the previous post.
Added to SVN... maybe I dont like kalakukko but prefer the reindeer? :) Most likely I have just missed the previous post.
Hi,
I just made this file and want to share it.