General talk regarding our HTPC-software MediaPortal 1 takes place here.
Is it possible in version 1.0 to start CMD.exe. Before i used to do this through My Programs, but this Plugin has been removed now.
Maybe it's possible to add this plugin to v1.0?
I use this because i skip Explorer.exe after winlogon and instead i start Media Portal directly, and this was my way back into explorer. But now i don't...
Is it possible in version 1.0 to start CMD.exe. Before i used to do this through My Programs, but this Plugin has been removed now...
Is it possible in version 1.0 to start CMD.exe. Before i used to do this through My Programs, but this Plugin has been removed now...
I have come across a great way to start MP
I use it to rum MP on my one pc so i can run a fairly useable pc and switch it to a htpc therfore using one box to do 2 seperate functions witrhout dualbooting or wasting resources
It is basically a script from a .bat that will in order
- close down all unnecesarry running programs
-...
I have come across a great way to start MP
I use it to rum MP on my one pc so i can run a fairly useable pc and switch it to a...
I have come across a great way to start MP
I use it to rum MP on my one pc so i can run a fairly useable pc and switch it to a...
My 2 Cents on why I don't like the separation of app and config.
1. I want a replacement for my set-top box. No set-top box requires a keyboard to update the channel list. (tv-server config app)
2. I want to add a path to be able to watch or listen to a file. It's not reasonable to have to shut down mp, go fetch a keyboard, start a...
My 2 Cents on why I don't like the separation of app and config.
1. I want a replacement for my set-top box. No set-top box...
So I have been using MP for around a year and a half and my mediacentre died last week, so after re installing windows i though I...
TVersity - Home
not sure if this allows tv streams buts works extremely well for video
TVersity - Home
not sure if this allows tv streams buts works extremely well for video
Hi everyone,
I had Vista installed on my PC but preffered XP's performance and all so I just switched back to XP Pro.
I have a...
https://forum.team-mediaportal.com/general-talk-233/initial-support-hauppuage-hd-pvr-45382/
https://forum.team-mediaportal.com/general-talk-233/initial-support-hauppuage-hd-pvr-45382/
Hello everyone,
I've been searching the forums and haven't found any real good information on this so I thought I would try...
Check this new thread - I'm ready for people to start testing.
https://forum.team-mediaportal.com/general-talk-233/initial-support-hauppuage-hd-pvr-45382/
Check this new thread - I'm ready for people to start testing...
Are there any plans to support the Hauppauge HD PVR when it comes out in May? Assuming it doesn't get pushed back again.
I have ATSC BDA 2883 Tuner and it works fine in showing channel but I can not get any EPG for it. When I use "Manual Control", all it shows "Grabbing EPG" and no EPG is being grabbed. Is it my setup or expected?
I have ATSC BDA 2883 Tuner and it works fine in showing channel but I can not get any EPG for it. When I use "Manual Control", all...
I have ATSC BDA 2883 Tuner and it works fine in showing channel but I can not get any EPG for it. When I use "Manual Control", all...
Hello all,
I have searched around regarding this question and could not find the correct info.
I know it is possible to use four digits with the remote in the guide but when viewing live tv, it only accepts 3 numbers for a channel change.
Am I missing something or is this by design.
Thanks
Hello all,
I have searched around regarding this question and could not find the correct info.
I know it is possible to use...
Hello all,
I have searched around regarding this question and could not find the correct info.
I know it is possible to use...
Great news! Just downloaded, i'll try as soon as possible.
Great news! Just downloaded, i'll try as soon as possible.
FYI
Just noticed that Nvidia released new chip drivers for nForce430/6150 (Asus M2NPV-VM) Date:12/9-2008 .
nForce Driver
I did...
This seems to be a well known problem:
AMD Game Forums - Blank screen when turning TV off, and on again
This seems to be a well known problem:
AMD Game Forums - Blank screen when turning TV off, and on again
I've got a very strange problem here. What happens is:
When i am done watching a movie (for example) and don't use the media...
The Vista x64 at the moment is more and more common.
Is this still true:
https://forum.team-mediaportal.com/mediaportal-1-talk-45/mediaportal-64bit-operating-systems-25603/
The Vista x64 at the moment is more and more common.
Is this still true...
The Vista x64 at the moment is more and more common.
Is this still true...
i'm a failure, ignore me
i'm a failure, ignore me
i'm a failure, ignore me
Anyone? I'm desperate :(
Edit: I've given up, CoreAVC solves my problem. So tired to fiddling around with PDVD and ATI CCC settings :(
Anyone? I'm desperate :(
Edit: I've given up, CoreAVC solves my problem. So tired to fiddling around with PDVD and ATI CCC...
I've about to throw out my HTPC.
Could anyone have a look at the following clip:
http://sara.homeunix.net/hd_1080i.ts
(have a...
I like "tjf" idea of either using AnyDVD to get rid of AACS or ripping the disc to HDD. I think it would be nice if MediaPortal could support playing BD without AACS either right from BD-rom or from hard drive (playing BD without AACS is leagal isn't it?). Does anyone know if such support is planned for MediaPortal 2?
P.S. The funny...
I like "tjf" idea of either using AnyDVD to get rid of AACS or ripping the disc to HDD. I think it would be nice if MediaPortal...
Can anyone tell me if there is going to be support for blu-ray and HD-DVD support in Media portal?
And I don't mean by using an...
I have found the documentation lacking. Are there any efforts underway to revamp the documentation to reflect the new 1.0.0.0 software release? Documentation should be more than just screen shots and text describing the screen shots. It should contain helpful descriptions of all the options available in the configuration menus...
I have found the documentation lacking. Are there any efforts underway to revamp the documentation to reflect the new 1.0.0.0...
I have found the documentation lacking. Are there any efforts underway to revamp the documentation to reflect the new 1.0.0.0...
Hi,
I appreciate streaming TV to the clients may accommodate a setup with 10+ clients , however, why is there not a "my tv" client that simply uses a windows samba file share?
If you look at other products such as sageTv you'll find the tv server writes the live tv stream to a file (as mediaportal does) then the client simply...
Hi,
I appreciate streaming TV to the clients may accommodate a setup with 10+ clients , however, why is there not a "my tv"...
Hi,
I appreciate streaming TV to the clients may accommodate a setup with 10+ clients , however, why is there not a "my tv"...
Shrek 2 is my "reference movie" for checking this. Especially look at the letter "W" in the intro.
Shrek 2 is my "reference movie" for checking this. Especially look at the letter "W" in the intro.
Hi,
Since I was the one started the thread...
No it doesn't as it runs as a service.
No it doesn't as it runs as a service.
I was wondering if a user has to be logged into the pc for tv server to work?
I hope that makes sense...
Thanks
Support added to MythTV
#4752 (Add R5000 STB Support to MythTV) ? MythTV ? Trac
Anyone want to add it to MediaPortal?
-Wes
Support added to MythTV
#4752 (Add R5000 STB Support to MythTV) ? MythTV ? Trac
Anyone want to add it to MediaPortal?
-Wes
Would it be possible to add support for this device, or perhaps the ability to write an interface where a developer could support...
ok, power supply replaced, now i just gotta figure out how to get it to work....YAY!! :(
ok, power supply replaced, now i just gotta figure out how to get it to work....YAY!! :(
I have a Hauppauge device that I am wondering if MediaPortal can use. I'm sorry I don't just try, but I'm tired of wiping my...
Hello Andrew,
NewMagic Website
This has the latest Vista Drivers - there is a note about not using the drivers with XP SP3 as their are currently known issues...:wtf:
Hello Andrew,
NewMagic Website
This has the latest Vista Drivers - there is a note about not using the drivers with XP SP3 as...
Hi all,
I'm thinking of buying a Hauppauge HVR 2200. Now, what do I have to do to get it to work on XP? Are there drivers to...
Unless I am mistaken, there is no support for using the 360 as a client directly to MP. I just share content through WMP11.
Unless I am mistaken, there is no support for using the 360 as a client directly to MP. I just share content through WMP11.
Hi,
although I trust this has been answered somewhere, and maybe I'm missing some very simple step, but how do I get my Xbox360 to...
I suppose you use power scheduler in the TV Server, did you have "Re-init TV service" actived? When I had this option checked, it looked like the service was stopped when entering standby but not started on resume. Check the tv.log.
I suppose you use power scheduler in the TV Server, did you have "Re-init TV service" actived? When I had this option checked, it...
I am wondering if anyone here has a Multiseat setup where thay have the server go into standby when not being used ?
If so, have...
10 seconds seems to be very fast.
But it depends where you start counting ;-)
See my boot video
YouTube - Boot XP From Compact Flash (then MediaPortal) with ewf enabled (from slow compact flash)
To be more precise:
Boots XP from Compact flash
Boots MP from network drive
Greetz,
Ben
10 seconds seems to be very fast.
But it depends where you start counting ;-)
See my boot video
YouTube - Boot XP From Compact...
Hi,
Has anybody a working HTPC based running on XPe?
I am specially interested in a diskless system based on XPe and PXE (boot...
I had that same problem, and made the suggested change, and now MP found the following channels:
Viasat Sport HD
NatGeo HD
TV 2 Sport HD
TV1000 HD
SVT HD
The problem is that I can't get them to work proper - I most often get the subtiles, and sometimes sound, but never the picture!
Anyone have any experience? (I have tried...
I had that same problem, and made the suggested change, and now MP found the following channels:
Viasat Sport HD
NatGeo HD
TV 2...
Hi guys
I don't know if this has been mentioned before in this forum, but i could not find a solution.
I have a FireDTV S2...
Ok, so I setup up MP to scan for channels and it found loads and set them up for me. Know I was fiddling around last night to get ITV HD setup and working and must have done a rescan about 10 times and now, when I look at the epg, I have multiple copies of each channel listed.
Is there a way to get rid of this information so that...
Ok, so I setup up MP to scan for channels and it found loads and set them up for me. Know I was fiddling around last night to get...
Ok, so I setup up MP to scan for channels and it found loads and set them up for me. Know I was fiddling around last night to get...
Hi Guys,
I have finally got MP showing the channels I want but has a small issue. I have selected the channels I wish to have displayed on the epg and noticed that I have 12 entries for 1 channel (BBC HD). How do I clear this list, I'm guessing the information is stored in an sql database somewhere??
I also need some help on...
Hi Guys,
I have finally got MP showing the channels I want but has a small issue. I have selected the channels I wish to have...
Hi Guys,
I have finally got MP showing the channels I want but has a small issue. I have selected the channels I wish to have...
Well that's the one I'm using, so....
I guess it's me doing something wrong?
Also used some vbscript that's out there for dutch epg (EPGManager.vbs)
Well that's the one I'm using, so....
I guess it's me doing something wrong?
Also used some vbscript that's out there for dutch...
Hey all,
Dunno if i'm the only one experiencing this (I don't believe so). I have webepg all setup (not using the MP...
Thanks for that. I changed it over and it didn't crash when I changed from BBC HD to another channel so thats a good sign.....Now if only I could get the epg data to populate. Its abit hit and miss with information. Is there something I should be doing here??
Thanks for that. I changed it over and it didn't crash when I changed from BBC HD to another channel so thats a good sign.....Now...
Hi Guys,
Currently using MP RC1.0.0.0 and have got it setup for channels (finally) but if I'm watching something on BBC HD and...
I am experiencing an elliptic (horizontal) "ghost circle" in MP while in fullscreen and in dark scenes. It appears only in fullscreen, not in windowed mode. Also it is not codec dependent - it appears in mpeg2, xvid, x264 media. Also it is TV, DVD, Video independent, it is everywhere.
The "ghost circle" is placed in the center of...
I am experiencing an elliptic (horizontal) "ghost circle" in MP while in fullscreen and in dark scenes. It appears only in...
I am experiencing an elliptic (horizontal) "ghost circle" in MP while in fullscreen and in dark scenes. It appears only in...