That solution didn't work for me, I had to remove some of the transponders. After that, he walked through it in one time. I became a link to a website where you can search the transponders that you need. At last I had only three transponders in my list. I'm from the netherlands, and don't watch german or other languages often, so I...
That solution didn't work for me, I had to remove some of the transponders. After that, he walked through it in one time. I became...
/ autotune. The error is reproduceable and happened to me when I tried to synchronize with Astra 19.2.
The setting only determines if TV should start if you e.g. launch TV Guide. The behaviour was changed by mr_hipp some time ago...
In fact MP just remembers and uses the "last known" state.
This error is handled by MP internally and should not cause your error..
Do you also see this with current svn?
The setting only determines if TV should start if you e.g. launch TV Guide. The behaviour was changed by mr_hipp some time ago...
Area: Media Portal Program
MediaPortal Version: 0.2.0.4 (2006-08-11)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)...
Area: Media Portal Program
MediaPortal Version: 0.2.0.4
MediaPortal Skin: BlueTwo
Windows Version: Windows XP - SP2
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: DScaler Audio Decoder
Video Codec: DScaler Mpeg2 Video Decoder
CPU Type: Athlon64 3500+
Memory: 2048mb
Motherboard: Asus A8N-VM CSM...
Area: Media Portal Program
MediaPortal Version: 0.2.0.4
MediaPortal Skin: BlueTwo
Windows Version: Windows XP - SP2
.NET CLR...
Area: Media Portal Program
MediaPortal Version: 0.2.0.4
MediaPortal Skin: BlueTwo
Windows Version: Windows XP - SP2
.NET CLR...
Its working!!!
After patching with yesterdays CVS and switching to exclusive direct x, I was able to view live tv without teraing for the first time since the first 0.2.0.0 RC1 !
Now I only have the following problems:
*pressing "-" (Im using it for navigating teletext) anywhere else than in teletextr modus causes a spontaneous...
Its working!!!
After patching with yesterdays CVS and switching to exclusive direct x, I was able to view live tv without...
Hi. Im not quite ready to write an extensive bug-report, but I thought I`d describe my problems to see of others have similar...
I have been investigating this issue a little bit deeper. It seems that the combination of mediaportal and reclock while using a mpeg2 decoder leads to problems with the playbackmode / surface allocation. According to the tests the problem is not only present in the dvd mode but affects mpeg decoding in general.
This does not...
I have been investigating this issue a little bit deeper. It seems that the combination of mediaportal and reclock while using a...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-15)
MediaPortal Skin: mce
Windows Version: Windows XP (SP2)...
Area: My TV
MP Version: 0.2 RC2
Skin: Blue Two
Windows Version: WinXP Pro SP2 + all Windows Updates
CPU Type: Intel P3 733MHz
Memory: 512 MB
Motherboard Chipset: Intel 815
Video Card: Sapphire Radeon 9200SE
Video Card Driver: Catalyst 5.12
Video Card Resolution: 800x600
Video Render Type: VMR9
Video Codec Type & Version...
Area: My TV
MP Version: 0.2 RC2
Skin: Blue Two
Windows Version: WinXP Pro SP2 + all Windows Updates
CPU Type: Intel P3 733MHz...
Area: My TV
MP Version: 0.2 RC2
Skin: Blue Two
Windows Version: WinXP Pro SP2 + all Windows Updates
CPU Type: Intel P3 733MHz...
Their might not be so many people running rc2 just yet.
I'm just backing up my config and then going to upgrade.
So I will see if I get the same problems.
(hope not of course)
Their might not be so many people running rc2 just yet.
I'm just backing up my config and then going to upgrade.
So I will see...
Area: Media Portal Program / Bugs
MP Version: 0.2 RC 2
Skin: Project X
Windows Version: XP Pro SP 2
CPU Type: Intel P4 1.8GHz...
Hi
I'm having these exact issues with no streaming radio when I have my Hauppage remote enabled in the setup.
I'm using MP 0.2 RC1 and a Hauppage 150, all drivers new and fresh.
Is there any solution on it's to fix this problem?
slyhne
Hi
I'm having these exact issues with no streaming radio when I have my Hauppage remote enabled in the setup.
I'm using MP 0.2...
Area: Radio
MP Version: 0.1.3.0 Final release (not pre-release)
Skin: Blue Two
Windows Version: WinXP Pro Service Pack 2
CPU...
Area: Media Portal Program - My TV
MP Version: mediaportal-svn-05-06-2006--01-05.rar
Skin: MCE
Windows Version: Win XP - SP 2
CPU Type: P4 2,8 Ghz
Memory: 512 DDR
Video Card: RADEON 9200 SE
Video Card Driver: Latest Catylist
Video Card Resolution: 1024x 786
Video Render Type: VMR9
TV card: Hauppauge pvr 150 MCE
Filter...
Area: Media Portal Program - My TV
MP Version: mediaportal-svn-05-06-2006--01-05.rar
Skin: MCE
Windows Version: Win XP - SP 2...
Area: Media Portal Program - My TV
MP Version: mediaportal-svn-05-06-2006--01-05.rar
Skin: MCE
Windows Version: Win XP - SP 2...
oh right i got the problem that automatically channels are added trhu the th config so i got like 3 double channels those double ones are the ones i got deselected i will have to live with it than ;) thanks for the quick response
oh right i got the problem that automatically channels are added trhu the th config so i got like 3 double channels those double...
Area: Media Portal Program - My TV
MP Version: mediaportal-svn-05-06-2006--01-05.rar
Skin: MCE
Windows Version: Win XP - SP 2...
Hi!
This is easy to explain, Axess TV/Aftonbladet TV only broadcast during the weekend/week. That's why you won't get any data during weekend/week. Will this cause a problem for WebEPG?
Could you have a look at the following source contribution?
https://forum.team-mediaportal.com/viewtopic.php?t=13339&highlight=dagenstv...
Hi!
This is easy to explain, Axess TV/Aftonbladet TV only broadcast during the weekend/week. That's why you won't get any data...
Hi,
The site that the swedish EPG grabber picks it's content from has changed around a few channels. Could someone please make...
It's already in SVN since some time. See config, section "General", "Allow blabla to gain focus blabla". (Or use TweakUI and turn that freaking XP focus feature off, unselect "Prevent applications from stealing focus" - This does the same, but without having to restart XP.)
Also you can tie the "get focus" property to each remote...
It's already in SVN since some time. See config, section "General", "Allow blabla to gain focus blabla". (Or use TweakUI and turn...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4$CVS-17.05.2006- 1:02:47,22
(2006-05-17)
MediaPortal Skin: MCE...
Marcusb,
Thanks for your response, all clear to me now. As you say, the timeshift functionality is great. In fact, overall I'm very happy with MP nowadays, and I even have my 69-year old father using it without any problems on his PC. Great work from the development team to now have a much more stable, yet still highly versatile...
Marcusb,
Thanks for your response, all clear to me now. As you say, the timeshift functionality is great. In fact, overall I'm...
Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC2 (2006-01-05)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP...
When I attempt to restart a movie file or dvd that I exited earlier, the GUI menus asking if I would like to resume is really, really slow. I am talking minutes. Then, suddenly, all remote commands that I have entered in frustration is executed at once (meaning that the yes/no selection spins like crazy) until the same repeats once...
When I attempt to restart a movie file or dvd that I exited earlier, the GUI menus asking if I would like to resume is really...
When I attempt to restart a movie file or dvd that I exited earlier, the GUI menus asking if I would like to resume is really...
Avermedia UltraTV 1500 MCE no video signal error
In the latest CVS (26-02-06) my tuner card (Avermedia UltraTV 1500 MCE) is recognized as Avermedia M150(NTSC) however, it will not display TV and gives me a black screen. The error message is No Signal when opening TV in full screen. Autotune tunes the channels properly but does not...
Avermedia UltraTV 1500 MCE no video signal error
In the latest CVS (26-02-06) my tuner card (Avermedia UltraTV 1500 MCE) is...
Area: Media Portal Program
MP Version: 2.0 RC2 CVS 26 Feb 2006 01:01
Skin: mce
Windows Version: XP SP2
CPU Type: P4 3.4Ghz...
Area: Media Portal Program
MP Version: 2.0 RC2
Skin: mce
Windows Version: XP SP2
CPU Type: P4 3.4Ghz
Memory: 3Gb - DDR2
Motherboard Chipset: Abit AA8 Duramax - Intel 9xx chipset
Video Card: Radeon X800XT PCI-E
Video Card Driver: Catalyst 8.221.0.0
Video Card Resolution: 1600x1200
Video Render Type: VMR9
Video Codec Type &...
Area: Media Portal Program
MP Version: 2.0 RC2
Skin: mce
Windows Version: XP SP2
CPU Type: P4 3.4Ghz
Memory: 3Gb - DDR2...
Area: Media Portal Program
MP Version: 2.0 RC2
Skin: mce
Windows Version: XP SP2
CPU Type: P4 3.4Ghz
Memory: 3Gb - DDR2...
I could take or leave most of the items on this list (I think that losing the open folder "memory" every time you go to the home screen would be infuriating, for example), but I think the OSD suggestion (number 4, just above) is a really good idea. This is how my set top box work and it is really helpful to be able to see the shows...
I could take or leave most of the items on this list (I think that losing the open folder "memory" every time you go to the home...
Version: 0.1.3.0.
Remote: MCE 2005 european version.
These three "bugs" are a little bit trivial. However, due to them, my...
Its odd. Power settings in XP set to "Home/Office" all other settings set to "Never".
Changed to "Always On" now no screensaver.
Changed back to "Home/Office" still with other settings set to "Never" and still no screensaver .... :?
Its odd. Power settings in XP set to "Home/Office" all other settings set to "Never".
Changed to "Always On" now no...
Area: Media Portal Program
MP Version: 2.0 RC2
Skin: mce
Windows Version: XP SP2
CPU Type: P4 3.4Ghz
Memory: 3Gb - DDR2...
I also get this message when returning to MyTV and it's extremely annoying, I want to watch what I'm recording without having to hit OK every time. Sometimes I get 'Recorder is busy' message when going to MyTV.
Is there no way to get rid of this check if you're using one tuner?
I also get this message when returning to MyTV and it's extremely annoying, I want to watch what I'm recording without having to...
A minor issue, and possibly one that is already well known, although my search didn't turn up much..
I have a single DVB-T...