Atmowin/ Atmolight Plugin - System für SEDU und Arduino basiertes Ambilight (2 Viewers)

azzuro

Test Group
  • Team MediaPortal
  • May 10, 2007
    9,948
    5,617
    France - IDF
    Home Country
    France France
    Hi, Angie
    For easy the follow of my test / improvement suggestion : i will update my post https://forum.team-mediaportal.com/...stem-für-ambilight.122528/page-3#post-1036705
    So for now with alpha5

    Bug :
    • translate all in english, @Rick164 can you help please for this ?
    • Atmowin Freeze when set Com port :
    When Atmoduino is connected to computer and i want to set it, in "Gerat konfigurieren.." set the com port to "com3" for my setup, click "Ok" Atmowin freeze. if i set the Atmoduino com port before plug-in it to computer,it's working fine.
    • channel assignement missing after update :
    channel assignement are not loaded/moved from previous version ( the path in registry is different since alpha4 )
    • Profile don't load correctly :
    always the issue with profile, device is not set, when load/switch the profile.
    • High CPU usage :
    since the Alpha 4 , i have High CPU usage 30 / 45 %, i have cheked "low cpu" inside Atmolight plugin, with 5ms for dropping frames.

    Feature :
    • channel assignement set in and for profile
    Channel assignement are set for a numbers of channels, dedicated to hardware. i think is better to add channel assignement to profile
    Profile TV :
    Channel Assign 1
    Channel Assign 2
    ---------------------------
    Profile beamer :
    Channel Assign 3
    Channel Assign 4

    • Add ability to Atmolight to change sliders parameter inside MP. very userfriendly.
    • Create new effect "Vidéo live view" instead of "live bild" for use with MP.
    better for understanding, but this is optional and very minor.
     

    angie05

    MP Donator
  • Premium Supporter
  • March 29, 2010
    141
    118
    Home Country
    Germany Germany
    Atmowin Freeze when set Com port :
    When Atmoduino is connected to computer and i want to set it, in "Gerat konfigurieren.." set the com port to "com3" for my setup, click "Ok" Atmowin freeze. if i set the Atmoduino com port before plug-in it to computer,it's working fine.
    sorry, i don't have the hardware so can't verify that. For SEDU it works flawless. But you found a workaround, good for you.

    • channel assignement missing after update :
    channel assignement are not loaded/moved from previous version ( the path in registry is different since alpha4 )
    yes, thats the way of an alpha version. I wrote "neu angelegte Kanalzuordnungen sind nun in allen Profilen verfügbar/ anwählbar".
    it means "only newly created channel assignements are available in all profiles." But you can still go to registry and copy your channel assignement from the profile folder to main folder.

    • Profile don't load correctly :
    always the issue with profile, device is not set, when load/switch the profile.
    yes, device changes will not be supported in near future. I see no use in that. Who would attatch an ambilight to a projector screen and destroy the bad black level even more.

    • High CPU usage :
    since the Alpha 4 , i have High CPU usage 30 / 45 %, i have cheked "low cpu" inside Atmolight plugin, with 5ms for dropping frames.

    5ms = 200 frames per second ... it's like not using "low cpu" option at all. try 50ms and higher.
     
    Last edited:

    azzuro

    Test Group
  • Team MediaPortal
  • May 10, 2007
    9,948
    5,617
    France - IDF
    Home Country
    France France
    it means "only newly created channel assignements are available in all profiles." But you can still go to registry and copy your channel assignement from the profile folder to main folder.
    it's OK for me.

    Who would attatch an ambilight to a projector screen and destroy the bad black level even more.
    you can look many, system with it
    http://www.instructables.com/id/Four-Steps-to-Build-an-Ambilight-for-Projector-Scr/
    http://www.avforums.com/threads/diy-ambilight-for-projector-screen.1423207/

    t's like not using "low cpu" option at all. try 50ms and higher.
    Ok, i do try it. thanks, but default value is 0, what is the previous value ( hardcoded ) ?
     

    Schicksal

    Portal Pro
    February 7, 2010
    800
    29
    Home Country
    Germany Germany
    Hilfe....
    ich bekomme das ding nicht zum laufen.
    ich scheitere schon an diesem AtmoWinA.exe /register
    folgende fehlermeldung plöppt auf:
    RegisterTypeLib failed. Code: 0x8002801c
    was mache ich falsch?
    hab es in folgendem pfad liegen: "C:\Program Files (x86)\Atmowin\AtmoWinA.exe"
    über cmd wechsel ich in diesen ordner und gebe AtmoWinA.exe /register ein und dann folgt halt die fehlermeldung.

    PS: verwende einen arduino mit dem code von rickdb mit ldp8806
     

    Schicksal

    Portal Pro
    February 7, 2010
    800
    29
    Home Country
    Germany Germany
    I just started cmd as Administrator and it works.
    Thanks for answering.

    Is there any testmode? Nothing happens and i want to check my wirering :/

    -------------edit---------------
    Mittlerweile leuchten die Streifen!!!
    RGB ist nun auch richtig.
    Zone/LED mapping ist fertig.

    FRAGE!!!!!
    Kann ich mein mapping irgendwo sichern?
    klar kann ich das mapping hinzufügen, aber irgendwo muss das ja gesichert sein.
    176 LEDs mappen macht nämlich keinen Spaß.
    Wie weise ich mein neues mapping (bei mir heißt es "sharp") als standard zu?
     
    Last edited:

    angie05

    MP Donator
  • Premium Supporter
  • March 29, 2010
    141
    118
    Home Country
    Germany Germany
    die Mappings stehen in der registry unter:
    HKEY_CURRENT_USER\Software\AtmoWinX\ChannelAssignment_*

    * ist die Nummer des Mappings
     

    Schicksal

    Portal Pro
    February 7, 2010
    800
    29
    Home Country
    Germany Germany
    Cool, danke! Schaue ich gleich mal nach. Und ne Frage als macuser... Wie kann ich so einen registry Eintrag sichern? Rechte Maustaste?


    Wie erkläre ich dieses Mapping zum Standard? Auch in der registry? 1 Standard, 2 meins einfach die Ziffern tauschen?

    -----edit------
    Hmm, unter atmowinx gibt es currentchannelassignment 0x00000000 (0)
    Und numchannelassignments 0x00000002 (2)

    Und einen Ordner tiefer benannt wie das gespeicherte Profile gibt es
    Currentchannelassignment 0x00000001 (1)

    Und sichern hab ich auch noch nicht raus.
     
    Last edited:

    angie05

    MP Donator
  • Premium Supporter
  • March 29, 2010
    141
    118
    Home Country
    Germany Germany
    Registry Einträge sichert man mit rechter Maustaste->exportieren

    Das Mapping wird automatisch zum Standard mapping wenn du Atmowin einmal über das Trayicon beendest. (per Trayicon wählt man es übrigens auch aus)
     

    Schicksal

    Portal Pro
    February 7, 2010
    800
    29
    Home Country
    Germany Germany
    Boah, win7 ist so blöd. Wenn ich regedit mit Administrator dingsbums starte, dann sehe ich auch channelassignment_1 den ich jetzt mal exportieren kann.


    ------edit--------
    Bei mir rührt sich nichts :(
    In Atmowin kann ich die Modis testen und mit den Farben spielen. Also von atmowin zu den LEDs klappt alles.

    Im MePo Client ist das Plugin eingeschaltet und bei Video/tv/recordings steht MP Live view. Deactive habe ich zum testen von 5-6 Uhr eingestellt.
    Dazu low CPU 200ms between frames.
    Der Pfad zu atmowin stimmt auch.

    Radio hab ich auf colorchange gestellt und da geht ooch nüschts an :(

    Muss ich noch irgendwas bei atmowin für diese Kommunikation einstellen?
    Steht auf keine Effekte. Ist das richtig?
     
    Last edited:

    Users who are viewing this thread

    Top Bottom