Blanking screen (1 Viewer)

OnkelChris

Retired Team Member
  • Premium Supporter
  • October 17, 2007
    764
    59
    Home Country
    Germany Germany
    Is this option gone in MP 1.0? Can't find it under "General"... "turn off tv" is there, but not the "blank screen if MP is idle"?!

    Merry Christmas :)
     

    OnkelChris

    Retired Team Member
  • Premium Supporter
  • October 17, 2007
    764
    59
    Home Country
    Germany Germany
    oh man... this ain't good... i think i need few days holiday... thx for the support :D
     

    Users who are viewing this thread

    Similar threads

    MP1 MP2 Recording length DE
    If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24 hours. However... That is using the "conventional" TV sources, i.e. a DVB-T tuner, a DVB-S tuner, or an analogue tuner. You stated in your other thread that you are using an IPTV source. Perhaps there is a...
    If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24...
    Is there a limit to recording length? My TVServer recordings all cut off at 3 hours but I can't find a setting anywhere to change...
    Replies
    1
    Views
    493
    Sorry, it's my fault -- I did not notice that you are using MP2. :( MP1 has a separate configuration utility, similar to "TV Server Config". I have tried MP2 only a couple of times, and have never used it seriously. I don't know what MP2 supports with regard to adjusting audio delay, but I do know that all of the adjustments of...
    Sorry, it's my fault -- I did not notice that you are using MP2. :( MP1 has a separate configuration utility, similar to "TV...
    Hi. I recently upgraded my home cinema AVR which also meant changed from sending audio from my HTPC as 5.1 using optical to 7.1...
    Replies
    5
    Views
    3K
    I have also had this problem in the past. There are two components to this problem: Your internet router is pinging the HTPC at regular intervals in order to see if the HTPC is still present on the network. The network adapter in the HTPC has "Wake on Lan" enabled. So at the end of a recording, the HTPC transitions from away mode to...
    I have also had this problem in the past. There are two components to this problem: Your internet router is pinging the HTPC at...
    Nachdem ich mp 1.38 neu installiert habe klappt soweit alles wie früher. Ein Problem besteht aber und das ist Standby nach einer...
    Replies
    6
    Views
    887
    maybe setting loglevel to debug might pinpoint the difference between normal and stuck? Preferable with as much disabled as possible also try to see if anything is happening during stuck for the mediaportal process(resource monitor, disk activity, cpu usage, anything) maybe other programs competing for resouces?
    maybe setting loglevel to debug might pinpoint the difference between normal and stuck? Preferable with as much disabled as...
    Since over a year my MP sometimes stucks while showing the welcome screen. It started once a week now it happens every second time...
    Replies
    4
    Views
    2K
    Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in Settings (which somehow I had missed, I think because it wasn't an option previously), and the deleted everything in the Flat-default folder and populated it with my own logos. Works, so far.
    Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in...
    Hi-- I have to revisit an old issue, unfortunately. I just downloaded MP 2.5, a fresh installation, on a new computer (reluctantly...
    Replies
    5
    Views
    2K
    Top Bottom