Broadband Technologies Air2PC-ATSC-PCI HDTV card (r0.2; DVB) (1 Viewer)

[WAK47]

No luck yet. http://mp.pastebin.com/708299

 

[dman_lfc]

OK last try before I go away on business.
Same again if you will.

DMAN

 

[WAK47]

http://mp.pastebin.com/709173

 

[WAK47]

From looking at the log, it looks like the channel frequencies are correctly set now. However, the transponder frequency is always -1, which should be the same as the channel frequency. I think this may be the problem.

 

[WAK47]

*BUMP*

 

[dman_lfc]

Ignore the transponder frequency of -1 as we do it further in the process.

Do the following...

Download the SDK from here...
http://www.bbti.us/download/windows/Technisat_SDK_1_11.zip

Extract the contents
In the Bin Directory created there will be a file called run_b2set_a.bat.
Edit that file
There is a line which is...
.\b2settuner.exe -a B2C2 -i a -f 725
Change it to...
.\b2settuner.exe -a B2C2 -i a -fk xxx000
where xxx = a known frequency of an ATSC channel where you can recieve a TV station.
i.e. ATSC channel 14 would be...
.\b2settuner.exe -a B2C2 -i a -fk 473000

See if that works and tunes a channel.
If so run b2status and paste the info here.

DMAN

 

[WAK47]

Here is what I got when I ran b2status:

b2status: Error: B2C2 Driver Data Ctrl. Interface GetKeyCount() method failed, error: 0x80004005

 

[dman_lfc]

OK but did the rest work ?

Try...
b2status -a B2C2 -all

Also try latest SVN

DMAN

 

[WAK47]

The latest SVN seems to fix all of the tuning problems. Auto-Scan finds all the channels, and MediaPortal is able to tune them. However, when I try to view a channel, there is no audio or video.
Thanks for your efforts; it seems like it's very close to working!

Here is a log:

http://mp.pastebin.com/719097

 

[dman_lfc]

Please post a log after re-tuning so I can see what happens.
Try tomorrow's SVN release also.

DMAN