[TV] DVB-C not all Channels work (1 Viewer)

Status
Not open for further replies.

morpheus_xx

Retired Team Member
  • Team MediaPortal
  • March 24, 2007
    12,073
    7,459
    Home Country
    Germany Germany
    I cannot find any issues for my 4 DVB-C cards: 2x Technotrend, 1 KNC1 and 1 Cinergy. All cards are scanning and tuning all given frequencies well. Signal level depends on cards: 50 to 95
     

    usualsuspect

    Portal Pro
    May 12, 2009
    631
    98
    Home Country
    Germany Germany
    same problem for me. mp 1.0.4.23491 on xp home sp3 (not the machine in "my system").
    dvb-c with hauppauge pvr930c, no signal for ard and zdf groups:
    2009-10-03 18:36:42.687500 [6]: dvb: LockedInOnSignal could not lock onto channel - no signal or bad signal

    working fine in dvbviewer (same freq, id, ...)
     

    infinite.loop

    Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,163
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    same problem for me. mp 1.0.4.23491 on xp home sp3 (not the machine in "my system").
    dvb-c with hauppauge pvr930c, no signal for ard and zdf groups:
    2009-10-03 18:36:42.687500 [6]: dvb: LockedInOnSignal could not lock onto channel - no signal or bad signal

    working fine in dvbviewer (same freq, id, ...)
    and you though that attaching full logs and systemspecs is not required because.... ??? :rolleyes:
     

    usualsuspect

    Portal Pro
    May 12, 2009
    631
    98
    Home Country
    Germany Germany
    sorry, i didn't want to bore you with the details... :)
    logs look similar to those of steffelgreen, here they are.
     

    kkendall

    Portal Pro
    April 24, 2007
    864
    16
    43
    Gouda
    Home Country
    Netherlands Netherlands
    Damn!
    After a clean install and a clean scan, I have the same problem! All channels are found, EPG is filled perfectly, but only a few channels work.
    sometimes it says No signal, sometimes unable to build graph sometimes unable to start timeshifting, sometimes succes... logs attached
     

    cfforce

    MP Donator
  • Premium Supporter
  • March 4, 2008
    241
    21
    Home Country
    Netherlands Netherlands
    Got the same problems with all svn's:

    A couple of:
    LockedInOnSignal waiting 20ms
    and then:
    LockedInOnSignal could not lock onto channel - no signal or bad signal

    I'll try to post some logs aswell.
     

    seco

    Retired Team Member
  • Premium Supporter
  • August 7, 2007
    1,575
    1,239
    Home Country
    Finland Finland
    I had same problem once, try changing tune timeout value in TVServer settings.

    Default is 2 seconds but my FireDTV DVB-C requires more for some channels (I have 5 seconds in configuration)
     
    Status
    Not open for further replies.

    Users who are viewing this thread

    Top Bottom