Guide Parameters (1 Viewer)

Thread starter Auggybendoggy
Start date March 26, 2017

Auggybendoggy

New Member

March 26, 2017

Is it possible to set MP's guide to display more than 2 hrs? I'd like 3-4 hours on the screen? Can that even be done?

there are "arrows/buttons" on EPG above the "gird" that let you adjust time up to 4 hours. Details vary based on skin, with Default-Wide they are between Date and the 1st Time. See TV Guide - MediaPortal 1 - MediaPortal Wiki

Users who are viewing this thread

Similar threads

MP1 MP2 Recording length DE

If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24 hours. However... That is using the "conventional" TV sources, i.e. a DVB-T tuner, a DVB-S tuner, or an analogue tuner. You stated in your other thread that you are using an IPTV source. Perhaps there is a...

If you use "Manual Booking" (left side menu on the "Recording Schedule" panel), you can schedule a recording duration of up to 24...

Is there a limit to recording length? My TVServer recordings all cut off at 3 hours but I can't find a setting anywhere to change...

Replies: 1

Views: 199

Sunday at 12:29

CyberSimian

MP1 MP2 Configuration guide still good? DE

Hi there, since I changed TV and HTPC's CPU, I'm wondering if this guide: Guide could be considered still good today, since it's been almost 13 years since then and it's still referring to a resolution of 1080p? I say this because I have a new Panasonic 4K HDR TV, and with that settings, even if I have an old Gygabyte GPU (bought...

Hi there, since I changed TV and HTPC's CPU, I'm wondering if this guide: Guide could be considered still good today, since it's...

Replies: 0

Views: 1K

February 5, 2025

Idro

MP1 MP2 Server and client work but remote clients fail DE

Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall rules were set to Public. I couldn't connect to the new TV Server from my old single-seat installation running 32-bit until I changed all MP-related firewall rules on the new machine to Private. Before I did...

Thank you for this tip! I'm moving MP TV Server to a new machine. I installed the 64-bit version and most of the MP firewall...

Server and client on modern uptodate Windows 11 desktop. Software is Server and Client version x86 1.38.003 Remote client on...

2 3

Replies: 26

Views: 2K

Thursday at 05:33

mrceolla

MP1 MP2 RTSP - test with VLC on same box, correct syntax? DE

I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV Server development looks dead so I'm afraid you're going to have to figure that out by yourself if it's even possible.

I meant use MP client to try to spot how it's requesting streams for specific channels and then try to do the same with VLC. TV...

Hi everyone, I've set up Mediaportal TV Server on a Windows 11 box, tuner deteced okay, scanned channels, can preview, all seems...