How to hide basic home screen? (1 Viewer)

overfiendau

Portal Member
December 5, 2006
16
0
Hi,
Does anyone know how to hide the basic home menu button or just stop it from being accessed?
I have a menu that i want to stay at (i press the green button on an MCE remote twice and it goes to basic home).


Thanks
 

SuAlfons

Portal Pro
June 5, 2005
55
0
Germany
Home Country
Germany Germany
Hi!

I don't know if you can disable Basic Home, but you can adjust the mapping of the green Button on the remote.

Look in the "Remote" Area of the config program and locate the mapping dialogue for the MCE remote (it's on the first or second sub-page).

In the maaping dialogue, locate the entry "Start" or "Startbutton". Yo should see several mappings for this button. It changes to "Home" from any other screen and to "Basic Home" when already on "Home". You simply delete this conditional setting and it will not go to Basic Home anymore.

Just made this up from my mind, but it should work like this.

Greetings,
Stefan
 

overfiendau

Portal Member
December 5, 2006
16
0
terrific, that worked :)
Thanks for that!


Ideally I would want to remove the basic home button in the top right hand corner as well (the one next to close).
any ideas?
 

Boilermaker

Retired Team Member
  • Premium Supporter
  • May 21, 2004
    519
    3
    change its x position and y position to somewhere far off screen, like -1000 by -1000 or something like that. Usually safer than just removing the control completely, removing some controls sometimes cause other things to mess up.

    Then you'll have to make sure you can navigate with your remote properly. Depending on the skin you are using, there should be onleft, onright and possibly onup and ondown tags for the surrounding buttons. You need to edit these tags for the surrounding buttons to skip over the basichome button entirely when using your remote to navigate. I may not have made that part really clear, so let us know which skin you are using, and i'll post a fix for you.
     

    Spragleknas

    Moderator
  • Team MediaPortal
  • December 21, 2005
    9,471
    1,822
    Located
    Home Country
    Norway Norway
    hehe.. had same question myself a while ago - and same "fix".

    however, the replicant skin makes BHS ver user friendly - so now I want to disable homescreen, but that is a lot worse (no mapping for basic home screen).
     

    wertzui

    Retired Team Member
  • Premium Supporter
  • July 2, 2005
    320
    8
    if you want to disable the normal homescreen, just copying basichome.xml into my home.xml and changing the id might work.
     

    illStyle

    Portal Pro
    August 26, 2006
    212
    5
    37
    Nuremberg
    Home Country
    Germany Germany
    That doesn't work :(. Is there an other way to disable the normal home screen? I just want to prevent MP from entering the normal home screen when pressing 'h' on the basic home screen.



    Regards,
    Simon
     

    infinite.loop

    Retired Team Member
  • Premium Supporter
  • December 26, 2004
    16,154
    4,133
    127.0.0.1
    Home Country
    Austria Austria
    Is there an other way to disable the normal home screen? I just want to prevent MP from entering the normal home screen when pressing 'h' on the basic home screen.
    well, easiest way would be to not press "h" then ;)

    you can have a look at the mapping section in the configuration.exe. maybe you can just un-map that action from "h" ;)
     

    bermag

    Portal Pro
    August 21, 2007
    68
    1
    Home Country
    Sweden Sweden
    I would also like to disable the normal home screen. I hate it and some of the skins has a really good basic home screen which I prefer (however, I would like to do some mods to it so I can still access all functions from basic home).

    Best would be if you could disable home screen or basic home screen in setup.
     

    ThaClown

    Moderator - Dutch Forums
    May 28, 2006
    807
    26
    Den Bosch
    Home Country
    Netherlands Netherlands
    I'd like this too, but changeing the H function is no good...
    like to have Monochrome and Aeon as options without going to the config.

    For the WAF I do not want 2 home screen options...

    For Aeon I want BasicHome

    For Monochrome I want Home


    Would this be possible?
     

    Users who are viewing this thread

    Similar threads

    I do not know why this xml was in my theme folders, it must have sneaked in some time ago (years?). I simply removed the file. The Latest Media Handler plugin seems to be working as expected. I've had no lock-ups.
    I do not know why this xml was in my theme folders, it must have sneaked in some time ago (years?). I simply removed the file. The...
    Before you create this bug report: Make sure that your system (windows, codecs and drivers) is up to date, matching the...
    Replies
    13
    Views
    4K
    I'm running 2.5 with the WMC skin. I have .mp4 files, along with the related .srt files in the same folder. I can watch the movies just fine. In past versions of MP, like 2.4x, I could press the More Info button on my remote twice, and on the second press, an option for showing/choosing the subtitles was listed. I'd select the...
    I'm running 2.5 with the WMC skin. I have .mp4 files, along with the related .srt files in the same folder. I can watch the...
    I'm running 2.5 with the WMC skin. I have .mp4 files, along with the related .srt files in the same folder. I can watch the...
    Replies
    0
    Views
    3K
    It is present, but not with that name. It is called Scheduler, viz: Interesting. I had never noticed that when the "command" is "ACTION", the "cmdproperty" is the actual window id, but it makes sense that it is. Try this for yourself. First backup your working profile for the remote, then in the "Mapping" panel make a change to...
    It is present, but not with that name. It is called Scheduler, viz: Interesting. I had never noticed that when the "command" is...
    I would like to be able to go directly to the Scheduled recordings window without having to first go to the home menu. I saw this...
    Replies
    1
    Views
    2K
    I haven't tested it. I use MP1, but sometimes I try to help with MP2 :).
    I haven't tested it. I use MP1, but sometimes I try to help with MP2 :).
    This happened immediately after my Windows 11 x64 monthly update for November. The update included also cumulative update to .NET...
    Replies
    9
    Views
    2K
    MP1 MP2 Design questions. DE
    No No
    No No
    Is there an xml display utility that will allow graphically checking of dialog and osd text and graphics element placement? or Is...
    Replies
    1
    Views
    2K
    Top Bottom