how to record TV and Set top box (1 Viewer)

cellsee6

Portal Member
June 26, 2022
10
0
Home Country
United States of America United States of America
Q1.) I have installed MP2 on my Windows 10 Pro computer. I have Comcast cable and set top box. Where can I find information about which TV cards will work with MP2 and Comcast set top box ?
 

ge2301

Lead Design MP2
  • Team MediaPortal
  • January 11, 2014
    8,761
    3,604
    Stuttgart
    Home Country
    Germany Germany
    in our Wiki you find the list of compatible hardware.
    If your hardware is not mentioned try to use the search function in forum. If you are lucky others tried your hardware and shared their experience. In worst case you need to just try by your self. As we are Open Source we can unfortunately not purchase all hardware types, but just the mainstream hardware.
     

    James9

    New Member
    August 20, 2024
    1
    0
    Home Country
    Poland Poland
    Hallo

    I have question related to topic, How do I set up Electronic Program Guide (EPG) data in MP2 for Comcast channels?

    James ;)
     

    ge2301

    Lead Design MP2
  • Team MediaPortal
  • January 11, 2014
    8,761
    3,604
    Stuttgart
    Home Country
    Germany Germany
    Hallo

    I have question related to topic, How do I set up Electronic Program Guide (EPG) data in MP2 for Comcast channels?

    James ;)
    you can find infor for this in our Wiki. I've no experience with Comcast, but basically the EPG setup is similar for any kind of channels.
    For cable and satelite the EPG is mostly delivered directly by the provider. Alternatively you can use xml based sources. I use for example the EPGBuddy, which is also mentioned in the WIKI.
     

    EvaWhirl

    New Member
    October 9, 2024
    1
    0
    Home Country
    Poland Poland
    You can check the MediaPortal forum for a list of compatible TV cards with MP2 and Comcast set-top boxes. The forum has a dedicated section for hardware discussions where users share their experiences. You might also want to look into the official MediaPortal documentation for any specific recommendations on TV cards. Good luck! :)
     

    Users who are viewing this thread

    Similar threads

    MP1 MP2 EPG woes DE
    I had the same problem, I have got it working with EPG123 and batch files to rename move. Only issue is it didn't do time correction so I had to apply +1 in MP2, and when the clocks just changed back I had to then remove the +1. Not ideal and not as plug and play as MC2XML but got ti working before the wife noticed. As it is I had...
    I had the same problem, I have got it working with EPG123 and batch files to rename move. Only issue is it didn't do time...
    Does anyone know how to “fix” the MC2XML application, and hopefully permanently? Mine stopped working sometime after September 29...
    Replies
    19
    Views
    4K
    Hello everyone. This isn't directly related to the issue discussed, but I noticed some people were looking for a recording splitter, and I'd personally recommend TSDoctor: Cypheros TS-Doctor Video Editor and Konverter It's commercial software but there is a trial option. It can do pretty much every thing you can imagine with TS files...
    Hello everyone. This isn't directly related to the issue discussed, but I noticed some people were looking for a recording...
    Hi, I've been using MP1 for many years but am new to the forum. When watching recorded TV shows with subtitles, normally they are...
    Replies
    40
    Views
    3K
    I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software controls the emitter, and transmits IR signals under the direction of MP. The IR signal is received by the IR receiver within the set-top box, and so can be used to change channel and so on. The set-top...
    I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software...
    My computer is running Windows 10 Pro. I have installed MP2. Not sure what version. I have a Hauppauge WinTV 1850 TV card...
    Replies
    8
    Views
    4K
    Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in Settings (which somehow I had missed, I think because it wasn't an option previously), and the deleted everything in the Flat-default folder and populated it with my own logos. Works, so far.
    Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in...
    Hi-- I have to revisit an old issue, unfortunately. I just downloaded MP 2.5, a fresh installation, on a new computer (reluctantly...
    Replies
    5
    Views
    2K
    MP1 MP2 Picture-in-picture DE
    Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many tries, and it’s not clear what I am doing that makes it work on those occasions when it does. Cannot find guidance on the site. Thanks, N. Again, if anyone knows how to do this, would be much...
    Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...
    Can anyone tell me the step-by-step procedure for bringing up a second channel in pip mode? I can only do it sometimes, after many...
    Replies
    0
    Views
    2K
    Top Bottom