[WiP] madVR support in MP1 (12 Viewers)

[Sebastiii]

Hi i think i understand what you explain about the black bar, i'm fear nothing can be done for madVR, because madVR need to separate the video for both eye (so it's on todo list of madshi but not sure it will be done soon). So yes for now some video is not working.

About the subtitle, in code we can have on offset, right now the value is 0 because it comes from madVR (this value is filled for Frame 3D because madVR handle it.

But i can add a default forced value and i think it will be ok for most of the subtitle

About Auto3D SBS or TAB is working on my side (but i have only 1080p resolution on my projector) and the 3D is auto switchind bt RS232 command.
But if i understand you correctly, you want that the resolution goes to 1080P when SBS or TAB is detected ?

I was thinking that if you add this in madVR refreshrate setting it would switch to that resolution.

Imagine this, playing a 1080P 3D SBS, if i have 1080p23 or 1080p24 or 1080p50 etc in the settings like :

I think it should change the resolution

Can you try with EVR ?
Btw in EVR, @Marcus Venturi manage to analyse the video and does a separation with blackbar etc.
I think only Auto3D (in EVR) does that, i don't think MPC-HC is capable of this.

 

[alexdepalma]

About Auto3D SBS or TAB is working on my side (but i have only 1080p resolution on my projector) and the 3D is auto switchind bt RS232 command.
But if i understand you correctly, you want that the resolution goes to 1080P when SBS or TAB is detected ?

I was thinking that if you add this in madVR refreshrate setting it would switch to that resolution.

Imagine this, playing a 1080P 3D SBS, if i have 1080p23 or 1080p24 or 1080p50 etc in the settings like :

I think it should change the resolution

Can you try with EVR ?
Btw in EVR, @Marcus Venturi manage to analyse the video and does a separation with blackbar etc.
I think only Auto3D (in EVR) does that, i don't think MPC-HC is capable of this.

Yes, my request is to force 1080P on TAB and SBS detection by Auto3D. And on Video Stop, return to previous resolution. I also have Eventghost sending http command to activate SBS or TAB modes on my JVC projector but they are ignored if 4K. They work on 1080P.

I have all modes in my MadVr setup so nothing there.
Subtitles on MVC 3D always worked and still work. SBS or TAB only if your new option is selected. So it could be automatic if any 3D mode from Auto3D is active, this new option also.
Many thanks, Monday will test EVR. Any how I'm afraid the sample video is improperly created. Not by Auto3D. When it was created. Black bar is on top of left eye and bottom of right eye. That's not right.

 

[Helios61]

@Helios61 : what decoder are you using in LAV?

I've tried all , nothing is working fine. In the meantime i've made a complete fresh install of windows and MP, but MP is unstable, a lot of issues with EVR and MAdVR. @Sebastiii , i've noticed again the old bug, that there is no sound with DRC enabled. IIRC it was fixed some weeks ago, isn't it?

 

[Sebastiii]

Hey
The DRC was removing disconnecting device (audio for sure) so i have made a workaround to redetect it so yes should be fixed but if it happen for Video then here is the culprit because related to what kind of GPU issue happen from this disconnecting, MP can't recover

Can be present this morning to do some testing if you want

 

[Sebastiii]

@alexdepalma

V351 that add the subtitle depth (by the setting from Auto3D) (for ex set to 20 on my side)

Can you test ?

 

[Sebastiii]

Yes, my request is to force 1080P on TAB and SBS detection by Auto3D. And on Video Stop, return to previous resolution. I also have Eventghost sending http command to activate SBS or TAB modes on my JVC projector but they are ignored if 4K. They work on 1080P.

I have all modes in my MadVr setup so nothing there.
Subtitles on MVC 3D always worked and still work. SBS or TAB only if your new option is selected. So it could be automatic if any 3D mode from Auto3D is active, this new option also.
Many thanks, Monday will test EVR. Any how I'm afraid the sample video is improperly created. Not by Auto3D. When it was created. Black bar is on top of left eye and bottom of right eye. That's not right.

About subs try the bin in previous post
About the switch to 1080p not sure if it's doable because the analyse is done on source video lol (for EVR we can maybe force that but not on madVR side i fear )

 

[Sebastiii]

Updated full MPEI for Auto3D in first post along with full installer

 

[alexdepalma]

@Sebastiii
Many thanks!
may be the change can by an implemented option in Auto3D and always if video is SBS or TAB, call a 1080p resolution on Windows without any furder video analysis. Simply if the Auto3D detects a SBS or TAB video call 1080p. the return on video stop may be more complicated...

the core is the same as full installer 351?

 

[Helios61]

if video is SBS or TAB

framepacked too

 

[alexdepalma]

framepacked too

Frame packet is already working as far as the resolution is set in MadVr setting and the return to previous resolution is working if MadVr option Restore original display mode... is active plus 'When media player is closed.'
With my NVIDIA is working. Some times in clone mode may fail it the Primary display is a non 3D framepacked display.
Some times on Nvidia driver update, I need to make the Nvidia 3D test proces to activate both 3D frame packed resolutions 720p and 1080p in windows. if they are on view, then change is automatic and works fine.