no standby at night (1 Viewer)

harryzwo

Portal Pro
July 25, 2006
870
115
Home Country
Germany Germany
since about 2 weeks my HTPC is running every morning. When i turned PC on via FB -> PC goes in standby.
So there is no reason to prevent Standby. In LOG i coulnd see anything.
 

Attachments

  • MediaPortalLogs_29_05_19__08_44.zip
    11.2 MB

HTPCSourcer

Retired Team Member
  • Premium Supporter
  • May 16, 2008
    11,418
    2,335
    Home Country
    Germany Germany
    Next time that you find your PC running, open an administrative command or powershell window and enter

    powercfg -lastwake

    This will then display what exactly is waking up your PC.
     

    harryzwo

    Portal Pro
    July 25, 2006
    870
    115
    Home Country
    Germany Germany
    I did this a few days ago.
    Powercfg replayed 'TVSERVICE'. In this night there was a recording with no standby after it.
     

    harryzwo

    Portal Pro
    July 25, 2006
    870
    115
    Home Country
    Germany Germany
    After ending Record HTPC have to go in AWAYMODE? is this Right. in TVSERVERLOG i found changeing in idle state.

    [2019-06-02 01:35:01,143] [Log ] [PS StandbyWakeup] [INFO ] - PS: System changed from busy state to idle state

    Can this be the reason of nostandby?
     

    CyberSimian

    Test Group
  • Team MediaPortal
  • June 10, 2013
    2,849
    1,771
    Southampton
    Home Country
    United Kingdom United Kingdom
    I see from your "System Specs" that you are using Windows 10. From what I have read elsewhere, Windows 10 has a tendency to reset the power-plan settings everytime a Windows update occurs. If your HTPC was working correctly, and it started misbehaving two weeks ago, could it have been due to a Windows 10 update?

    I would suggest reviewing carefully all of your power-plan settings, to make sure that they are what you think they should be. Note that away mode should be enabled.

    Are you using the "PowerScheduler" plugin? I would suggest using it in "plug and play" mode, with the "HTPC" plan selected.

    If none of that works, install Windows 7.

    -- from CyberSimian in the UK
     

    harryzwo

    Portal Pro
    July 25, 2006
    870
    115
    Home Country
    Germany Germany
    I think i have found the Reason.
    I send MP to Standby with FB. it seems that MP-Client not closed. So after resume by TVSERVICE timeshifting begins and HTPC didn't go to Standby anymore.
     

    harryzwo

    Portal Pro
    July 25, 2006
    870
    115
    Home Country
    Germany Germany
    is there any possibility to close MP-Client via Batch while clicking 'all off' on FB? It seems so that MP-Client not automaticly close when HTPC goes to standby.
     

    CyberSimian

    Test Group
  • Team MediaPortal
  • June 10, 2013
    2,849
    1,771
    Southampton
    Home Country
    United Kingdom United Kingdom
    is there any possibility to close MP-Client via Batch while clicking 'all off' on FB?
    The client part of "PowerScheduler" looks like you can specify a BAT file that you want to run when the HTPC is about to standby. I say "looks like", as the Wiki is not clear on what is supported :(. (Or to put that another way, I don't understand it :(.) Start here and see if it helps you.

    On my system, I do something similar to what you want, but I don't use "PowerScheduler" to run the BAT file (I have a very convoluted setup to manage power-state changes). There may be other ways of closing the MP client, but the way that I use is for the BAT file to run an AutoHotKey script. The script sends keyboard shortcuts to the MP window to stop playback, invoke the exit dialogue, and select "close MP". My script won't work for you (it is too specific to my setup), but if you are a programmer you could write your own script to do the equivalent.

    -- from CyberSimian in the UK
     

    Users who are viewing this thread

    Similar threads

    MP1 MP2 Odd Standby issue DE
    Since I played around with all the settings as per the previous posts and despite putting everything back to how it was, as far as I can tell, now when my HTPC wakes up to make a recording it no longer does so in away mode. I will probably do a restore from a backup in the hope that that will resolve the issue.:mad:
    Since I played around with all the settings as per the previous posts and despite putting everything back to how it was, as far as...
    Generally standby is working well on My Mp 1.32 x64 pre set up. I just have one issue, which was also present on earlier x86...
    Replies
    35
    Views
    4K
    Well, there is nothing wrong in the log. I have personaly tested the bitstreaming after DVD resume, and I can confirm that the LAV audiodecoder shows status 'bistreaming' on the output. What is your LAV status?
    Well, there is nothing wrong in the log. I have personaly tested the bitstreaming after DVD resume, and I can confirm that the LAV...
    My apologies for posting two separate issues in one posting, however, the logs I have cover both. 1. Resume playback of...
    Replies
    13
    Views
    808
    And this is the follow-up thread, which includes log files: PiP audio problem
    And this is the follow-up thread, which includes log files: PiP audio problem
    I just updated from 2.4. Update did not conserve my channels or epg plug-in or anything, looks like, which of course was a...
    Replies
    5
    Views
    511
    MP1 MP2 MP2 - V2.5 No genres after upgrade to 2.5 DE
    You need to check the wiki for TVMosaic, you have recordings as source available once TVM is installed. And of course images and music are part of the NET6 version as for NET4. If you have issues with it further infos would be good.
    You need to check the wiki for TVMosaic, you have recordings as source available once TVM is installed. And of course images and...
    Make sure that your system (Windows, codecs and drivers) is up to date, matching the Requirements and you've filled in your System...
    Replies
    10
    Views
    867
    The layout of remotes does vary from one model/brand to another. I too find that some layouts are better than others. Generally, I prefer the buttons that I use most-frequently to be positioned near the center of the remote, which is not the case with that particular Dell remote. :( Battery life is often a problem. A remote that I...
    The layout of remotes does vary from one model/brand to another. I too find that some layouts are better than others. Generally, I...
    In Dec 2020: I purchased 2 remotes for my new HTPC install, eg: HP USB MCE IR RC6 Wireless Receiver and TSGH-IR02 Windows Media...
    Replies
    16
    Views
    3K
    Top Bottom