SAT>IP-Server Triax in MPO einbinden (1 Viewer)

mm1352000

Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    There is a "Destination unreachable (Port unreachable)"
    and then "TEARDOWN" which does not sound good ;-)
    TEARDOWN is 100% normal. It just means "close the connection".
    The "destination unreachable" is also normal for a SAT>IP tuner.

    Please give me a week or so to provide a new patch (hint to Kay: OPTIONS keep-alive! ;) ). I'm working on it as fast as I can, but work this week is really busy so I don't have as much time to do MediaPortal code as normal.
     

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Hello Kay and TheMerovingian

    First, I apologise for the long wait. My computer's motherboard died last weekend. I've had to rebuild my computer before I could make more progress with the promised patch. Thanks for your patience. (y)

    The patch is attached.
    You need to modify MPIPTVSource.ini:
    Code:
    [RTSP]
    ...
    RtspSendCommandDescribe = 0
    RtspKeepAliveWithOptions = 1
    I've done a quick test and it looks like it's working. :)
    If you find any problems, please provide:
    • MediaPortal log files from the Watchdog tool option 1
    • all TV Server log files, including MPIPTVSource.log with LogVerbosity 4 or 5
    • MPIPTVSource.ini
    • Wireshark dump

    @KayDiefenthal
    Please test thoroughly with all available SAT>IP servers (including the OctopusNet) because the code has been heavily modified.
     

    Attachments

    KayDiefenthal

    MP Donator
  • Premium Supporter
  • July 18, 2006
    1,176
    92
    42
    Germany - Bonn
    Germany Germany
    Country flag
    Hello Kay and TheMerovingian

    First, I apologise for the long wait. My computer's motherboard died last weekend. I've had to rebuild my computer before I could make more progress with the promised patch. Thanks for your patience. (y)
    Murphys Law ?
    @KayDiefenthal
    Please test thoroughly with all available SAT>IP servers (including the OctopusNet) because the code has been heavily modified
    an short test with the triax

    scan is working had here only one 454 Session not found seen by an Options Request but this was after an Teardown
    so is it no Problem

    preview send Options and runs ok

    the other two (Digibit R1 ,DD Onet )
    test i now for you
     

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    Murphys Law ?
    Yes. :(

    scan is working
    ...
    preview send Options and runs ok
    Great! :)

    had here only one 454 Session not found seen by an Options Request but this was after an Teardown
    so is it no Problem
    Hmmm, I'll try to change the code to avoid sending OPTIONS after TEARDOWN.

    the other two (Digibit R1 ,DD Onet )
    test i now for you
    Thanks. I look forward to the results...
     

    mm1352000

    Development Group
  • Team MediaPortal
  • September 1, 2008
    21,571
    8,218
    New Zealand New Zealand
    Country flag
    so next test log and capture for Telestar digibit r1

    rtsp Looks ok but rtp packages have only Header Information no ts data
    Log files and Wireshark are excellent. (y) (y) (y)

    The RTCP stream is telling me "pids=none".
    Maybe the PIDs need to be set by the RTSP PLAY command?
    If that's the case, I'm sorry to say that I don't think I can fix it. I don't have easy control of the URL for the PLAY command.
     

    KayDiefenthal

    MP Donator
  • Premium Supporter
  • July 18, 2006
    1,176
    92
    42
    Germany - Bonn
    Germany Germany
    Country flag
    in my samples tune i only with Setup include with pids
    and if i want Change the Service send i Play with new Tuning Infos


    before i Forget it the Telestar send after new tune /Change firstly one rtp package with only the Header
    the next packages had than the ts included
     

    Users Who Are Viewing This Thread (Users: 0, Guests: 1)

    OP Similar threads Forum Replies Date
    H SAT>IP-Server Kathrein unter TV3.5 Allgemeines Support- und Diskussionsforum 39
    H SAT>IP-Server XORO in MPO einbinden Installationsprobleme? 110
    Golf4 DVB-IP über Fritzbox - m3u-Senderliste Allgemeines Support- und Diskussionsforum 33
    K 1&1 IP-TV TV / Streaming 16
    J Kein Rtl, Sat 1 Pro 7 ... mehr TV / Streaming 0
    W Keine SD Sender mehr wie Pro 7, SAT 1 RTL Allgemeines Support- und Diskussionsforum 4
    K sudden complication watching recorded TV Newcomers Forum 6
    Lehmden General Sat>IP Basics and TVE TV Engine 10
    morpheus_xx General Testing TVE 3.5 Sat>IP support (MP2 only) TV Engine 47
    A VB-IP SPAIN Movistar plus tunning details (Update 26 dec 2018) Submit: EPG-Grabbers and tuningdetails 1
    porky996t DVB Sat card possibly failed General Support 1
    A DVB IP Crash on Scanning - 1.20 General Support 0
    J Use IP address of NAS in network path for Recorded TV General Support 8
    Y TSS 400 MKII SAT>IP WDR HD Lokalzeit und EPG Problem TV / Streaming 18
    A Keine Verbindung mit Kodi auf Server Allgemeines Support- und Diskussionsforum 10
    CyberSimian Unhandled exception in TV Server TV-Server 0
    Grisu002 Failed to startup - TV Server funktioniert nicht Allgemeines Support- und Diskussionsforum 0
    ajs [WiP] 5030: Add UHD Thumb size to TV Server MediaPortal 1 0
    toricred [solved] Configuring TV Server to use NAS General 1
    T Client / Server slow channel-to-channel change (zapping) General Support 1
    T Server / client channel logo location Installation, configuration support 6
    framug [solved] Some changes/fix in MP1 configuration client and server Submit: code patches (MediaPortal/TV-Server/etc.) 14
    S TV-Server MP1 - Automatic search doesn't work Installation, configuration support 2
    M TV Server can't tune to some DVB-S multiplexes while other software can General 0
    J TV Server setup question Newcomers Forum 0
    Top Bottom