SAT>IP-Server Triax in MPO einbinden (3 Viewers)

[KayDiefenthal]

sure here is it

SatIp Rtsp Sample.7z

the Digibit has 192.168.2.104
and the Client has 192.168.2.103

there is no ? after hostort/ and the params can be the onet Problem

ok my failure for the digibit was the ?

 

[mm1352000]

there is no ? after hostort/ and the params can be the onet Problem

Maybe try to set the URL as <host>:<port>/??...

 

[mm1352000]

ok my failure for the digibit was the ?

Ahhh.

 

[KayDiefenthal]

i think it should working too with the Onet i try it a Little later today and Report back

 

[mm1352000]

i think it should working too with the Onet i try it a Little later today and Report back

It works with my Onet. That's how I tested...

 

[TheMerovingian]

Hej there,

thank you very much for the patch.
I cannot say whether there is a new problem.
There is definitely a problem which seems to be new, I still have to test.
The picture and the sound seems to hang, from time to time. Also there are some artefacts from the compression, squares to see.
I am not sure whether there was heavy traffic in my network last night, or if this is a problem in MP1. (did not test the patch in MP2 till now)
Here is a log, and if you need more just ask ;-)
When I have time I will also try a wireshark log..

 

[mm1352000]

@TheMerovingian

thank you very much for the patch.

You're welcome.

There is definitely a problem...

Could this be because you've set the IPTV source log verbosity (c:\ProgramData\Team MediaPortal\MediaPortal TV Server\MPIPTVSource.ini, LogVerbosity setting) to 5 (data)?
When you set the log verbosity to 5 you should expect stuttering. For normal operation you need to set it to 3 (default) or lower.

did not test the patch in MP2 till now

I don't provide support for MP2.

 

[Baserunner]

http funktioniert beim Scannen, es gibt jedoch Fehler beim Tunen

Spoiler: Error Log:

[2016-08-13 06:26:09,117] [Log ] [7 ] [ERROR] - Exception :TvLibrary.TvExceptionNoPMT: TVDvbChannel.OnGraphStarted: no PMT found
bei TvLibrary.Implementations.DVB.TvDvbChannel.OnGraphStarted()
bei TvLibrary.Implementations.DVB.TvCardDVBIPBuiltIn.RunGraph(Int32 subChannel, String url)
bei TvLibrary.Implementations.DVB.TvCardDVBIP.DoTune(Int32 subChannelId, IChannel channel, Boolean ignorePMT)

[2016-08-13 06:27:31,604] [Log ] [21 ] [ERROR] - Exception :TvLibrary.TvExceptionNoPMT: TVDvbChannel.OnGraphStarted: no PMT found
bei TvLibrary.Implementations.DVB.TvDvbChannel.OnGraphStarted()
bei TvLibrary.Implementations.DVB.TvCardDVBIPBuiltIn.RunGraph(Int32 subChannel, String url)
bei TvLibrary.Implementations.DVB.TvCardDVBIP.DoTune(Int32 subChannelId, IChannel channel, Boolean ignorePMT)

Bei rtsp stürzt tvsetup.exe ab.

Spoiler: Error Log:

[2016-08-12 22:17:30,652] [Log ] [DVB-IP scan thread] [ERROR] - Exception ystem.Net.Sockets.SocketException (0x80004005): Eine vorhandene Verbindung wurde vom Remotehost geschlossen

Server stack trace:
bei System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
bei System.Runtime.Remoting.Channels.SocketStream.Read(Byte[] buffer, Int32 offset, Int32 size)
bei System.Runtime.Remoting.Channels.SocketHandler.ReadFromSocket(Byte[] buffer, Int32 offset, Int32 count)
bei System.Runtime.Remoting.Channels.SocketHandler.Read(Byte[] buffer, Int32 offset, Int32 count)
bei System.Runtime.Remoting.Channels.SocketHandler.ReadAndMatchFourBytes(Byte[] buffer)
bei System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadAndMatchPreamble()
bei System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadVersionAndOperation(UInt16& operation)
bei System.Runtime.Remoting.Channels.Tcp.TcpClientSocketHandler.ReadHeaders()
bei System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
bei System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)

Exception rethrown at [0]:
bei System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
bei System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
bei TvControl.IController.Tune(IUser& user, IChannel channel, Int32 idChannel)
bei SetupTv.Sections.CardDvbIP.DoScan()

Ich bleibe mal bei meinem zusätzlichen &?.

I can report that I don't have the above problems with the fix anymore - many thanks!

 

[TheMerovingian]

Reducing log level really solved the problem.

Crash, while recording and watching the same channel

 

[mm1352000]

Crash, while recording and watching the same channel

Unless I've missed something, it looks like an MP2 client crash:
[collapse]
"14.05.2017 19:51:22";".NET Runtime";"(0)";"Error";"Anwendung: MP2-Client.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Net.WebException
bei System.Net.ServicePointManager.FindServicePoint(System.Uri, System.Net.IWebProxy, System.Net.ProxyChain ByRef, System.Net.HttpAbortDelegate ByRef, Int32 ByRef)
bei System.Net.HttpWebRequest.FindServicePoint(Boolean)
bei System.Net.HttpWebRequest.BeginGetRequestStream(System.AsyncCallback, System.Object)
bei UPnP.Infrastructure.Dv.GENA.EventSubscription.ContinueEventNotification(AsyncRequestState)
bei UPnP.Infrastructure.Dv.GENA.EventSubscription.SendEventNotification(System.Collections.Generic.IEnumerable`1<UPnP.Infrastructure.Dv.DeviceTree.DvStateVariable>)
bei UPnP.Infrastructure.Dv.GENA.EventSubscription.OnNotificationTimerElapsed(System.Object)
bei System.Threading.TimerQueueTimer.CallCallbackInContext(System.Object)
bei System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
bei System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
bei System.Threading.TimerQueueTimer.CallCallback()
bei System.Threading.TimerQueueTimer.Fire()
bei System.Threading.TimerQueue.FireNextTimers()
bei System.Threading.TimerQueue.AppDomainTimerCallback()

";"1026"
"14.05.2017 19:51:23";"Application Error";"Anwendungsabsturzereignisse";"Error";"Name der fehlerhaften Anwendung: MP2-Client.exe, Version: 2.1.1705.10177, Zeitstempel: 0x5908d2e4 Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 10.0.15063.296, Zeitstempel: 0x28e9cf15 Ausnahmecode: 0xe0434352 Fehleroffset: 0x000eb802 ID des fehlerhaften Prozesses: 0x3140 Startzeit der fehlerhaften Anwendung: 0x01d2ccd328a414ed Pfad der fehlerhaften Anwendung: C:\Program Files (x86)\Team MediaPortal\MP2-Client\MP2-Client.exe Pfad des fehlerhaften Moduls: C:\WINDOWS\System32\KERNELBASE.dll Berichtskennung: ca191f9b-3d19-483e-9167-421beb85f0ad Vollständiger Name des fehlerhaften Pakets: Anwendungs-ID, die relativ zum fehlerhaften Paket ist: ";"1000"[/collapse]

It seems that TV Server was still running when you collected the log files.

Like I said in my previous reply, I don't provide support for MP2. So, I don't think I can help you with this. Different problem.