Scythe42's fixes for 1.4.0 (1 Viewer)

[Der_Bub]

Hello,

after Stoping TV MediaPortal freezes and I have to kill it to get on.

You have lots of 'PES H264 0-0-1 fail' messages in the TsReader log - have you got decryption/CAM problems ?

The TsReader and EVR logs just stop, but in MediaPortal.log there is:

[2013-04-28 23:08:12,547] [Log	] [MPMain  ] [DEBUG] - g_Player.doStop() keepTimeShifting = False keepExclusiveModeOn = False
[2013-04-28 23:08:12,547] [Log	] [MPMain  ] [INFO ] - g_Player.OnStopped()
[2013-04-28 23:08:12,549] [Log	] [MPMain  ] [INFO ] - RefreshRateChanger.AdaptRefreshRate: 'auto refreshrate changer' not going back to default refreshrate
[2013-04-28 23:08:12,555] [Log	] [MPMain  ] [INFO ] - RadioRecorded:OnPlayRecordingBackStopped TV C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live6-0.ts.tsbuffer
[2013-04-28 23:08:12,559] [Log	] [MPMain  ] [INFO ] - TVHome:turn tv off
[2013-04-28 23:08:12,825] [Log	] [MPMain  ] [INFO ] - TvRecorded:OnPlayRecordingBackStopped TV C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live6-0.ts.tsbuffer

....so it has tried to stop TV playback but not succeeded (filter graph hasn't been stopped etc. according to the logs)

I just installed CAM for HD+, but it was running fine with 1.3 original.

But the systems seems to get completly worse after installing the different Versions, nothing seems to run fine anymore, espacially after resuming. Will restore an image this evening and if it's runnig fine/stable for a few days, I will give the Scythe42's versions another try.

 

[elliottmc]

Hello,

after Stoping TV MediaPortal freezes and I have to kill it to get on.

You have lots of 'PES H264 0-0-1 fail' messages in the TsReader log - have you got decryption/CAM problems ?

The TsReader and EVR logs just stop, but in MediaPortal.log there is:

[2013-04-28 23:08:12,547] [Log	] [MPMain  ] [DEBUG] - g_Player.doStop() keepTimeShifting = False keepExclusiveModeOn = False
[2013-04-28 23:08:12,547] [Log	] [MPMain  ] [INFO ] - g_Player.OnStopped()
[2013-04-28 23:08:12,549] [Log	] [MPMain  ] [INFO ] - RefreshRateChanger.AdaptRefreshRate: 'auto refreshrate changer' not going back to default refreshrate
[2013-04-28 23:08:12,555] [Log	] [MPMain  ] [INFO ] - RadioRecorded:OnPlayRecordingBackStopped TV C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live6-0.ts.tsbuffer
[2013-04-28 23:08:12,559] [Log	] [MPMain  ] [INFO ] - TVHome:turn tv off
[2013-04-28 23:08:12,825] [Log	] [MPMain  ] [INFO ] - TvRecorded:OnPlayRecordingBackStopped TV C:\ProgramData\Team MediaPortal\MediaPortal TV Server\timeshiftbuffer\live6-0.ts.tsbuffer

....so it has tried to stop TV playback but not succeeded (filter graph hasn't been stopped etc. according to the logs)

I just installed CAM for HD+, but it was running fine with 1.3 original.

But the systems seems to get completly worse after installing the different Versions, nothing seems to run fine anymore, espacially after resuming. Will restore an image this evening and if it's runnig fine/stable for a few days, I will give the Scythe42's versions another try.

Your problems are unlikely to be caused by Scythe's fixes.

 

[Chubler]

I seem to be suffering with a "disposed timer" issue in the MP-TV plugin ltfearme mentions it in this thread:

https://forum.team-mediaportal.com/threads/mp-tv-series-not-automatically-updating-my-shows.107864/

in relation to "resume from standby".

However it is happening here after turning the amp on an off, i.e. no standby involved. I'm hoping you could discuss this with him at a techie level and perhaps come up with a solution for both the resume and amp./TV power-down issues.

Logs attached.

 

[Scythe42]

I seem to be suffering with a "disposed timer" issue in the MP-TV plugin ltfearme mentions it in this thread:.

Need more information what part of MP is involved here. The thread does not mention it. If you can point me in the direction of what part of MP is used by TV-Series here I can check.

 

[Sebastiii]

@Scythe42 : The sizing issue is still in the latest build from April 26th.

When I start on the secondary Screen, which is a bit smaller than the Primary (1600 x 900 is Primary, 1440 x 900 is Secondary) MP is sized as the Primary Screen, but located on the secondary, so it is overlapping into the Primary Screen (which is on the right).

I can't reproduce your issue, can your screenshot or take a picture ?

I have set like you about resolution except for me screen1 (1600 x 900 is Primary) is to the left and screen2 (1440 x 900 is Secondary) is to the right

 

[mbuzina]

@Sebastiii is on Page 14 (I know long time ago ;-) https://forum.team-mediaportal.com/threads/scythe42s-fixes-for-1-4-0.118345/page-14#post-987442

I will try rearrange the Screens to see if that helps. I am in a conversation with Scythe testing some debug builds for this as well.

 

[mbuzina]

Tried to arrange the other way around, display 2 is still taking the resolution from display 1. Difference is just that part of MP is now outside any screen instead of overlapping on the primary.

 

[Sebastiii]

@Sebastiii is on Page 14 (I know long time ago ;-) https://forum.team-mediaportal.com/threads/scythe42s-fixes-for-1-4-0.118345/page-14#post-987442

I will try rearrange the Screens to see if that helps. I am in a conversation with Scythe testing some debug builds for this as well.

Thanks

Ok bad on me i have try 720p Skin
Will try with titan (1080 screen)

Seb.

 

[mbuzina]

Same problem when I use DW instead of Titan.

 

[Sebastiii]

I can't reproduce it seems, but i use latest GIT branch.
I have attached 2 screenshots :
From starting MP on screen 2 (@ right) 1440x900 (MP_Scythe42_Build_start_screen2(1440x900).jpg)
From starting MP on screen 1 (@ left) 1600x900 (MP_Scythe42_Build_start_screen1(1600x900).jpg)
Seb.

Edit : reupload screen