In the process of building your own HTPC or did you complete one? Show them to other MediaPortal users!
Hi, this is my first post so be gentle :) I thought I should start by introducing my machine.
I finished my new HTPC just before Christmas (that's '07 in case this thread becomes a timeless classic). I opted for the Silverstone ML02B-MXR after a lot of searching and procrastinating. I know a larger case would have given me more...
Hi, this is my first post so be gentle :) I thought I should start by introducing my machine.
I finished my new HTPC just before...
Hi, this is my first post so be gentle :) I thought I should start by introducing my machine.
I finished my new HTPC just before...
This is the first HTPC i've ever built, It's gonna be a full sized computer. I need to know what motherboard/cpu I should get for it, your thoughts are greatly appreciated i'm in the usa.
I've got a cheap NGC atx/at ready full tower case that comes with a 450w power supply.
EVGA e-GeForce 7600 GS vid card
Haupauge...
This is the first HTPC i've ever built, It's gonna be a full sized computer. I need to know what motherboard/cpu I should get for...
This is the first HTPC i've ever built, It's gonna be a full sized computer. I need to know what motherboard/cpu I should get for...
Check out the beast here
My HTPC Setup
Check out the beast here
My HTPC Setup
Check out the beast here
My HTPC Setup
hi everyone!
here is my htpc config
1)Mcubed hfx Classic fanless case with imon vfd and remote
2)Abit İl90-mv mobile mainboard with hdmi out, gma 950 onboard graphics and 8 ch onboard audio
3)2 GB dual channel Ram(667)
4)İntel T7200 (2.0 GHz) mobile processor
that's all works perfect
hi everyone!
here is my htpc config
1)Mcubed hfx Classic fanless case with imon vfd and remote
2)Abit İl90-mv mobile...
hi everyone!
here is my htpc config
1)Mcubed hfx Classic fanless case with imon vfd and remote
2)Abit İl90-mv mobile...
Hello all,
Just something I wanted to share.
Yesterday I have finished the single seat installation of MP-1.1.0. It took me a couple of ours but I am very pleased with the result. Since a long time I can use WebEPG again! This was the only shortcoming I encountered with the previous version I was running (1.0 RC4). Now I could spare...
Hello all,
Just something I wanted to share.
Yesterday I have finished the single seat installation of MP-1.1.0. It took me a...
Hello all,
Just something I wanted to share.
Yesterday I have finished the single seat installation of MP-1.1.0. It took me a...
When I try to delete a recorded file, the client says that it is not possible to do that.
The the file is still in the list but it´s not possible to access it again.
If I try to delete it a second time, nothing hapens.
How come? This occured when updating to the latest version.
I use a stand alone server with two DVBSky tv card and...
When I try to delete a recorded file, the client says that it is not possible to do that.
The the file is still in the list but...
When I try to delete a recorded file, the client says that it is not possible to do that.
The the file is still in the list but...
Hi again,
Is anyone running with an X-Plosion soundcard?
What I need to know is whether the SPDIF IO connector on the actual card will output SPDIF the same as the optical/coax? It says in the little documation there is that this is for adding an external spdif panel.
The reason I ask is that I am planning on using HDMI...
Hi again,
Is anyone running with an X-Plosion soundcard?
What I need to know is whether the SPDIF IO connector on the actual...
Hi again,
Is anyone running with an X-Plosion soundcard?
What I need to know is whether the SPDIF IO connector on the actual...
Hi every one,been running media portal for a while.
There's always been the odd glitches with it and the mods with media portal which i had done and hardware compatibility has been an issue.
so i whent to media centre 2005 for a while and tinked with media portal.
I decided to build a new system to run both, and i reckon i...
Hi every one,been running media portal for a while.
There's always been the odd glitches with it and the mods with media portal...
Hi every one,been running media portal for a while.
There's always been the odd glitches with it and the mods with media portal...
Hi there
I'm having some problem with my hauppauge hvr 1300 tv card. When retyrning from system standby (s3) and entering the tv module in media portal it's unable to start the tv module, because the card is busy from prev. connection
What do i do to solve this ?
Hi there
I'm having some problem with my hauppauge hvr 1300 tv card. When retyrning from system standby (s3) and entering the tv...
Hi there
I'm having some problem with my hauppauge hvr 1300 tv card. When retyrning from system standby (s3) and entering the tv...
At this moment I have a functional HTPC running Mediaportal 1.01, but I'm in the process of rebuilding the machine. Basically the hardware will be the same but I will replace the case. Now, I am using an Antec NSK-2480, while this case does the job, I want a case that is more elegant, so I've ordered myself an Antec Fusion Remote...
At this moment I have a functional HTPC running Mediaportal 1.01, but I'm in the process of rebuilding the machine. Basically the...
At this moment I have a functional HTPC running Mediaportal 1.01, but I'm in the process of rebuilding the machine. Basically the...
I have built a htpc system and I am satisfied with the performance of the system, need to do some serious playing around with the post processing features but so far everything is working great.
One big concern I have is streaming data over my wireless network, it seems to work well for standard definition content, music and...
I have built a htpc system and I am satisfied with the performance of the system, need to do some serious playing around with the...
I have built a htpc system and I am satisfied with the performance of the system, need to do some serious playing around with the...
hello im a new at the this forum and want to show my own low budget htpc :)
Hardware :
Motherboard : Asus M2A-VM HDMI 690G
Cpu : Amd X2 4200+ 2.2GHZ cooled by a ninja sytche
Memory : Kingston 2x 1gb pc5300 value CL 5.0
Harddisk : Samsung 320gb 16mb hd321kj, WD external 400gb harddisk and almost 1.7tb of movies from my network...
hello im a new at the this forum and want to show my own low budget htpc :)
Hardware :
Motherboard : Asus M2A-VM HDMI 690G
Cpu ...
hello im a new at the this forum and want to show my own low budget htpc :)
Hardware :
Motherboard : Asus M2A-VM HDMI 690G
Cpu ...
My first contact with Media Portal was in begin 2008. In November 2009 I presented my first configuration Multiseat setup Media Server / Mini-iTX Client, and year of operation as it introduced the Another ION HTPC - T.I.B. It was confirmed that I was on the right way and so in May 2010 I drew on experience from the operation of the...
My first contact with Media Portal was in begin 2008. In November 2009 I presented my first configuration Multiseat setup Media...
My first contact with Media Portal was in begin 2008. In November 2009 I presented my first configuration Multiseat setup Media...
Hey guys,
Please, let me know your opinion about my choice:
Graphics. ASUS GF 9600GT PCIE DDR3 512M 256BIT HDM
HDD inside. WD5002ABYS WD CAVIAR RE3 500GB SATA2 7200RPM 16MB
Asus DVD-RW (quiet)
CPU. INTEL E8400 CORE2D 3.0GHZ 1333/6M S775 (or INTEL E8500)
RAM. APACER BRANDED DDR2 800 4GB CL5 128*8KIT (or corsair with...
Hey guys,
Please, let me know your opinion about my choice:
Graphics. ASUS GF 9600GT PCIE DDR3 512M 256BIT HDM
HDD inside...
Hey guys,
Please, let me know your opinion about my choice:
Graphics. ASUS GF 9600GT PCIE DDR3 512M 256BIT HDM
HDD inside...
hi,
in the last 4 years i used vista mediacenter and build some plugins (e.g. homeautomation Weiterleitung / Redirecting ...), but now i try mediaportal and it runs very good with some nice features.
i had in my house round about 6 extenders (xbox 360, linksys dma 2100 an dma 2200), this i want to replace with an relativ silent...
hi,
in the last 4 years i used vista mediacenter and build some plugins (e.g. homeautomation Weiterleitung / Redirecting ...)...
hi,
in the last 4 years i used vista mediacenter and build some plugins (e.g. homeautomation Weiterleitung / Redirecting ...)...
I have what is kind of an offbeat (but simple) requirement for recording TV. I have a FTA satellite receiver that has an attached USB drive that can be used to make recordings. unfortunately it has no PVR capabilities so one has to manually start and stop the recording of sat shows. Most of what I will record is HD and I would prefer...
I have what is kind of an offbeat (but simple) requirement for recording TV. I have a FTA satellite receiver that has an attached...
I have what is kind of an offbeat (but simple) requirement for recording TV. I have a FTA satellite receiver that has an attached...
Hi Guys
I've bought an Antec 430 Fusion Black, the case is great and the LCD screen isn't so bad as mentioned in other forums, but could be better... it is value 4 the money!
I'm running MP1.0 and the mini display works great in this version.
With instant sheller I've hidden my complete XP environment.
Really great software...
Hi Guys
I've bought an Antec 430 Fusion Black, the case is great and the LCD screen isn't so bad as mentioned in other forums...
Hi Guys
I've bought an Antec 430 Fusion Black, the case is great and the LCD screen isn't so bad as mentioned in other forums...
It isnt Finished yet, But here it is
It isnt Finished yet, But here it is
It isnt Finished yet, But here it is
After I moved a couple months ago, my MediaPortal HTPC sadly sat around collecting dust until I had some time to show it some love via an up/down grade (it had issues with MediaPortal crashing halfway through a movie and I was never quick enough with VNC to catch the dialog box):
Motherboard: Asus P2B-D (old: Asus P2B)
Processor...
After I moved a couple months ago, my MediaPortal HTPC sadly sat around collecting dust until I had some time to show it some love...
After I moved a couple months ago, my MediaPortal HTPC sadly sat around collecting dust until I had some time to show it some love...
Where to start? ;)
Like a lot of people here, I'm in the process of building my first "proper" HTPC.
Currently I've got an old laptop with a cracked screen hooked up to my TV and amp with a good old MCE remote which is perfect for watching TV episodes and listening to music on.
Though I quite likec the idea of building a cheap...
Where to start? ;)
Like a lot of people here, I'm in the process of building my first "proper" HTPC.
Currently I've got an old...
Where to start? ;)
Like a lot of people here, I'm in the process of building my first "proper" HTPC.
Currently I've got an old...
I got the parts from New Egg on Friday, but the motherboard (Gigabyte GA-MA74GM-S2) was DOA, so I had to go out today to find a suitable replacement. I ended up with an Asus M3A78-EM at twice the cost of the Gigabyte board. The rest is:
Silverstone LC13B-E case
Seasonic 380-watt PSU
AMD 4860e
4gb RAM
Saphire 4670 video card...
I got the parts from New Egg on Friday, but the motherboard (Gigabyte GA-MA74GM-S2) was DOA, so I had to go out today to find a...
I got the parts from New Egg on Friday, but the motherboard (Gigabyte GA-MA74GM-S2) was DOA, so I had to go out today to find a...
I've been building an HTPC to connect to my Samsung 50" plasma via my Onkyo received over HDMI. Relevant specs are as follows:
WD 500GB SATA drive
300W Power supply
AMD X2 5600+
2 GB Dual channel RAM
HIS HD2600XT 256 MB
HT Omega Striker 7.1 audio card
Gigabyte GA-MA69GM-S2H motherboard
Windows Vista Home Premium x64
I...
I've been building an HTPC to connect to my Samsung 50" plasma via my Onkyo received over HDMI. Relevant specs are as follows...
I've been building an HTPC to connect to my Samsung 50" plasma via my Onkyo received over HDMI. Relevant specs are as follows...
Here we go.....:)
I moved the thread to completed HTPC
https://forum.team-mediaportal.com/my_htpc_silverstone_lc16_m-t25111.html
Here we go.....:)
I moved the thread to completed HTPC
https://forum.team-mediaportal.com/my_htpc_silverstone_lc16_m-t25111.html
Here we go.....:)
I moved the thread to completed HTPC
https://forum.team-mediaportal.com/my_htpc_silverstone_lc16_m-t25111.html
Hi folks.
Looking at replacing my WDTV box which I stream to from my PC with a dedicated HTPC.
I'm primarily looking to manage and view my vast collection of blu rays and DVD's and use something like Mediaportal to access. I would also use it as the dedicated box for accessing Netflix which my PS3 is currently pointed at and then...
Hi folks.
Looking at replacing my WDTV box which I stream to from my PC with a dedicated HTPC.
I'm primarily looking to manage...
Hi folks.
Looking at replacing my WDTV box which I stream to from my PC with a dedicated HTPC.
I'm primarily looking to manage...
Hello all,
I am wondering if anyone has made a custom IR receiver for their case. I am planning on doing it, once I have my case ordered and delivered (most likely next month) and of course I am planning a million things in my head.
This is the only thing I have found that may work
Home Electronics, OEM Customers Info
Hello all,
I am wondering if anyone has made a custom IR receiver for their case. I am planning on doing it, once I have my case...
Hello all,
I am wondering if anyone has made a custom IR receiver for their case. I am planning on doing it, once I have my case...
Hello All!
Happy New Year! I have put together an HTPC which is still a work in progress but I thought I would share what parts I've used so far and how I configured it.
Here is the parts list:
- Chassis, NZXT HUSH, with a 450W PSU
- MSI K8T Neo2 v2.0, VIA K8T800PRO chipset with DDR, AMD Socket 939
- CPU, AMD Athlon 64...
Hello All!
Happy New Year! I have put together an HTPC which is still a work in progress but I thought I would share what parts...
Hello All!
Happy New Year! I have put together an HTPC which is still a work in progress but I thought I would share what parts...
Hi,
I'm building a new machine that will serve both as the main Tv-server and an client for my daughter.
There will be also be a another MP client for my girlfriends daughter.
These computers will be placed in my hobbyroom.
There will be some kind of cabling (wireless?) for sound and MCE remote (USB) and DVI (HDMI?) to monitors...
Hi,
I'm building a new machine that will serve both as the main Tv-server and an client for my daughter.
There will be also be...
Hi,
I'm building a new machine that will serve both as the main Tv-server and an client for my daughter.
There will be also be...
ECS A-780GM-A
AMD Phenom 8450
4GB DDR2-800
550Watt "quiet" Power Supply (18db)
120mm CPU Heatsink/Fan combo (Xigmatek HDT-S120) (replaced the stock fan with a lower noise 120mm fan I had)
1 500GB WD SATA
2 1TB Seagate SATA drives
Blu-Ray/HD-DVD ROM combo drive.
Currently in a Themaltake Desktop case (researching a good HTPC...
ECS A-780GM-A
AMD Phenom 8450
4GB DDR2-800
550Watt "quiet" Power Supply (18db)
120mm CPU Heatsink/Fan combo (Xigmatek HDT-S120)...
ECS A-780GM-A
AMD Phenom 8450
4GB DDR2-800
550Watt "quiet" Power Supply (18db)
120mm CPU Heatsink/Fan combo (Xigmatek HDT-S120)...
Hi there.
I've been using Mediaportal for 2 months now as my primary STB. Because of instability(No offence to developpers, they have done a great job !) i decided to code a little software, which keeps Mediaportal and tv server up and running i case of a failure. Mostly it is TV server which crashes when zapping from/to HD...
Hi there.
I've been using Mediaportal for 2 months now as my primary STB. Because of instability(No offence to developpers, they...
Hi there.
I've been using Mediaportal for 2 months now as my primary STB. Because of instability(No offence to developpers, they...