Having trouble installing or configuring MediaPortal?
I did use MediaPortal with a capital P. Didn't work.
I used the SQL server management tool and changed the password for the sa database in there - worked fine then.
I can't get TV to work though, and Videos arent working either. Press play on a video, it goes away for a second then stright back.
I did use MediaPortal with a capital P. Didn't work.
I used the SQL server management tool and changed the password for the sa...
Hi,
I just uninstall MP 0.2.3 (All MP programs incl TV Server) and installed RC1.
Going into TV Server Configuration, the...
As written here: https://forum.team-mediaportal.com/get-support-90/tv-server-unable-switch-channel-38385/
I ran into trouble using singleseated install with TV-Server. So i uninstalled all the components and tried to install without TV-Server. Hm well, the setup finishes without installing anything. The screen telling me what to...
As written here: https://forum.team-mediaportal.com/get-support-90/tv-server-unable-switch-channel-38385/
I ran into trouble using...
As written here: https://forum.team-mediaportal.com/get-support-90/tv-server-unable-switch-channel-38385/
I ran into trouble using...
Hi,
If you only want to use MP & inbuild TV Engine you shouldn't have installed TV Server & TV Plugin(which give you the message about entering ip to TV Server).
Regards
Roy
Hi,
If you only want to use MP & inbuild TV Engine you shouldn't have installed TV Server & TV Plugin(which give you the message...
Hello I got a Problem with my MP 1. When I want to watch TV in "MYTV" it always tells me that I should enter the name or IP of the...
I got my movie DB copied over to RC1 (thanks for the tip) now I just need to get MyPrograms over. I have a lot of games set up in it and really don't feel like doing it all over again. Anyone know how I should do this?
I got my movie DB copied over to RC1 (thanks for the tip) now I just need to get MyPrograms over. I have a lot of games set up in...
Do I need to unistall previous version of MP? I didn't use tv server tough... And if I have to remove old version can I use my...
Hi I found more info about my card. Here it is
Tuner Philips TDA8275A
Decoder chip Philips SAA7131E
Interface PCI
PCB size Low profile with ATX bracket
Analog TV NTSC / PAL / SECAM
FM radio Yes
Remote sensor Interface IR
Others Supports Windows®XP MCE, ROHS model,
Hi I found more info about my card. Here it is
Tuner Philips TDA8275A
Decoder chip Philips SAA7131E
Interface PCI
PCB size Low...
Hi I cant get it my TV Card to work with Media Portal. It says Unable to create graph. i'm using a Gigabyte card. Please help.
TV-Server Version: SVN 16422
MediaPortal Version: SVN 16420
MediaPortal Skin: Blue Wide
Windows Version: Windows XP SP2
CPU Type: Intel Core 2 Duo e6600
HDD: 1863.02 GB
Memory: 2 GB
Motherboard: Asus P5B
Video Card: ATI Radeon X1900XT
Sound Card: M-Audio Rev. 5.1
Sound Card AC3: Coax Out
1. TV Card: Technotrend C-1500
1...
TV-Server Version: SVN 16422
MediaPortal Version: SVN 16420
MediaPortal Skin: Blue Wide
Windows Version: Windows XP SP2
CPU...
TV-Server Version: SVN 16422
MediaPortal Version: SVN 16420
MediaPortal Skin: Blue Wide
Windows Version: Windows XP SP2
CPU...
ok tried quickly in RC1 recognized in tvserver & working in mediaportal, although seems to take more cpu or more glitches than built in MP.
ok tried quickly in RC1 recognized in tvserver & working in mediaportal, although seems to take more cpu or more glitches than...
TV-Server Version:
MediaPortal Version: 0.2.3.0 Rev 18207 (3/23/08)
MediaPortal Skin: Haven't got that far
Windows Version...
Hello
Mediaportal is great but I still have small issue with my tv card
It's a Winfast DTV1000T card that work very well for digital tv in Mediaportal.
This card has also a svhs input connector that I would like to use to connect my satellite box
This connector seems to be impossible to configure under Mediaportal
I have been to...
Hello
Mediaportal is great but I still have small issue with my tv card
It's a Winfast DTV1000T card that work very well for...
Hello
Mediaportal is great but I still have small issue with my tv card
It's a Winfast DTV1000T card that work very well for...
Greyed out button was due to having TV Server running on the machine at the same time. Stopped that, and I was then able to pick up the card straight away :)
Greyed out button was due to having TV Server running on the machine at the same time. Stopped that, and I was then able to pick up...
Hi,
Has anyone successfully been able to get the A177 working for digital TV in Media Portal?
I'm currently using it with MCE...
Hello Community,
theres is no sound in MP playing mp3's, ape, flac, wv-files and in Television. Can anybody help?
Best Regards,
Michael
Hello Community,
theres is no sound in MP playing mp3's, ape, flac, wv-files and in Television. Can anybody help?
Best...
Hello Community,
theres is no sound in MP playing mp3's, ape, flac, wv-files and in Television. Can anybody help?
Best...
TV-Server Version:
MediaPortal Version: 0.2.3
MediaPortal Skin: BlueTwo
Windows Version: Vista Ultimata x86
CPU Type: AMD X2 5200++
HDD: Seagate 250
Memory: Samsung 2GB
Motherboard: GIGABYTE GA-MA78GM-S2H
Motherboard Chipset: 780G
Motherboard Bios:
Video Card: 3200HD
Video Card Driver:
Sound Card: Realtek ALC889A
Sound...
TV-Server Version:
MediaPortal Version: 0.2.3
MediaPortal Skin: BlueTwo
Windows Version: Vista Ultimata x86
CPU Type: AMD X2...
TV-Server Version:
MediaPortal Version: 0.2.3
MediaPortal Skin: BlueTwo
Windows Version: Vista Ultimata x86
CPU Type: AMD X2...
Unsuccessful
Hi,
I followed the instructions verbatim. The only change I made was downloading AVerTV: 6.0.11 from:
AVerMedia MPD - Support -
instead of downloading from http://www.avermedia.com/cgi-bin/sup...9&modelno=M15C which was nothing but pop-ups.
I did download the audio encoder from...
Unsuccessful
Hi,
I followed the instructions verbatim. The only change I made was downloading AVerTV: 6.0.11 from:
AVerMedia...
I was able to add this card to MP :D
If anyone is interested in the details, let me know.
I don't think it helps much, but I had hat happening with there own software, I thought it was just there software but maybe there was a bit more to it. I think it was even the same tuner working. Have you tried tuning with tuner 1 and associating the channels with both tuners (I suspect it won't help but maybe you'll be lucky and...
I don't think it helps much, but I had hat happening with there own software, I thought it was just there software but maybe there...
Hopefully someone who has this card can help me out...
I failed in getting a dual hybrid avermedia card going with ANY software...
hello!
at the end of the installation it appears the error that i mentioned in the title box..
i have microsoft visual c++ installed and net framework 2.0..
any help please? :)
stefano
hello!
at the end of the installation it appears the error that i mentioned in the title box..
i have microsoft visual c++...
hello!
at the end of the installation it appears the error that i mentioned in the title box..
i have microsoft visual c++...
Use TVServer, it's powerscheduler will allow chosen .exe's to block shutdown whilst running, ie firefox, tmpgenc xpress 4, azurues or whatever you select that must not be interrupted, and of course as soon as they shutdown, back to normal standby options.
Use TVServer, it's powerscheduler will allow chosen .exe's to block shutdown whilst running, ie firefox, tmpgenc xpress 4, azurues...
Hi forum,
This is freeking me out. Has anyone a solution or idea ?
I'm running MP on WinXPSP2, and it works great.
The power...
Eureka!!!! I've Got It!!!!
Well firstly, and foremostly, to Shekshiong goes out the biggest thank you possible to mankind!!!!! With your information I finally got the Leadtek Winfast DTV2000 H Digital/Analogue Tuner Card to work!!!!
Firstly here is the end result;
<capturecard commercialname="Leadtek WinFast DTV2000 H...
Eureka!!!! I've Got It!!!!
Well firstly, and foremostly, to Shekshiong goes out the biggest thank you possible to mankind...
I Think I must have missed some vital step :S. I get "No video capture card(s) were found" in configuration utility (Television /...
I have been meaning to ask this for some time but only recently has it become more annoying for me.
Here in New Zealand we have just introduced a DVB-T system, of which its support is growing rapidly and i myself have it set up at home. The problem lies in that i also have some channels still mapped to an analogue card as they...
I have been meaning to ask this for some time but only recently has it become more annoying for me.
Here in New Zealand we have...
I have been meaning to ask this for some time but only recently has it become more annoying for me.
Here in New Zealand we have...
I also have the 800i. Win xp sp2, fully patched. I dont have tv server installed, dont really think i want/need it. tried adding the first then the second way of doing it in my capturecarddefinitions.xml with no go. Still coming up as no cards detected. any ideas? anyone?
I also have the 800i. Win xp sp2, fully patched. I dont have tv server installed, dont really think i want/need it. tried adding...
MediaPortal Version: 2.3.0
MediaPortal Skin: default
Windows Version: Windows XP SP2
1. TV Card: Pinnacle PCTV HD 800i...
thanks, my issue is solved :)
thanks, my issue is solved :)
TV-Server Version: N/A
MediaPortal Version: 0.2.3.0
MediaPortal Skin: Blue
Windows Version: Vista Business (6.0.6000.0)
CPU...
Got it fixed, for those who wanna know how:
I added some genres to the database and assigned those to the movies. Then in MP i choice 'Genre' to list the movies and then i've got all movies in seperate folders like i assigned them :)
Tnx to ThaClown & Djaro for the help :)
Got it fixed, for those who wanna know how:
I added some genres to the database and assigned those to the movies. Then in MP i...
I've been trying to figure it out, but somehow i can't find the get the settings ik like so i hope you guys have any idea if it's...
MediaPortal Version: 0.2.3.0
MediaPortal Skin: xface
Windows Version: XP MCE 2005 SP2
CPU Type: AMD x64 4200+
HDD: 2×samsung spinpint 500GB 1×samsung spinpoint 200GB
Memory: 2GB PC5300
Motherboard: Acer
Video Card: ATI x300
Video Card Driver:
Sound Card AC3: Theatron Agripa 7.1 DTS
Remote: MCE
I am a new user. I just...
MediaPortal Version: 0.2.3.0
MediaPortal Skin: xface
Windows Version: XP MCE 2005 SP2
CPU Type: AMD x64 4200+
HDD: 2×samsung...
MediaPortal Version: 0.2.3.0
MediaPortal Skin: xface
Windows Version: XP MCE 2005 SP2
CPU Type: AMD x64 4200+
HDD: 2×samsung...
A second card? Why not focus on the one and get it's analog (capture) side working first. One possibility may be that MP can't tell the two cards apart, logically. I have a HDTV-Wonder and HVR-1600 so I'm not trying to have two identical cards.
MP will use the analog driver to access a/v capture as a 'special' channel under...
A second card? Why not focus on the one and get it's analog (capture) side working first. One possibility may be that MP can't...
TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version:
CPU Type:
HDD:
Memory:
Motherboard...
Hi,
I currently have a working MCE 2005 installation, but want to switch over to MediaPortal.
I have it all installed and working fine except for the TV Tuner, it's not detected by the configuration, and when I try to search for it I get nothing.
My card is a Genius TVGo A12 (PCI)
Are these kind of cards not supported? Or am I...
Hi,
I currently have a working MCE 2005 installation, but want to switch over to MediaPortal.
I have it all installed and working...
Hi,
I currently have a working MCE 2005 installation, but want to switch over to MediaPortal.
I have it all installed and working...
:( i have a ATI card. But thanks for the tip Jacktramiel!
:( i have a ATI card. But thanks for the tip Jacktramiel!
Hi is there a hack/trick that i can use them at the same time?
Now i must alway turn my 5.1 on for sound. I can use the HDMI...
corsarotorom,
did you find a solution to your problem?
I have exactly the same error as you do with my Scaleo E (actually, I had to use the TV engine to make the TV work at all in MP). I have never been able to figure out how to make MP realise I have two cards. I only use the analog parts of the cards, though.
Björn
corsarotorom,
did you find a solution to your problem?
I have exactly the same error as you do with my Scaleo E (actually, I had...
Hi guys,
I hve installed mediaportal on my Fujitsu Siemens Scaleo E with OS WinXP MCE 2005. The computer has 2 Tv cards Hauppauge...
I see there is a plugin to pull TV series information, but is this not done automatically, like in XBMC?
If I have a show that I have, say Hereos S02E03, will it not scrape a thetvdb or some other site for it? What about TV show folders to pull pictures..for instance, if I have 3 folders, Heroes, My Name Is Earl and Simpsons, will...
I see there is a plugin to pull TV series information, but is this not done automatically, like in XBMC?
If I have a show that I...
I see there is a plugin to pull TV series information, but is this not done automatically, like in XBMC?
If I have a show that I...
Hi
After struggling with this for a week, as a last resort I have installed XP. Everything now works out of the box. As I don't like the browsing on MC I will leave this configuration.
Neels
Hi
After struggling with this for a week, as a last resort I have installed XP. Everything now works out of the box. As I don't...
TV-Server Version:
MediaPortal Version: 0.2.3.0
MediaPortal Skin: BlueTwo
Windows Version: Vista 32
CPU Type: Intel Core 2 Duo...
Sorry. My Stupidity. I did not notice that the dropdown for screen selection must be activated in the list above: the last option.
Neels
Sorry. My Stupidity. I did not notice that the dropdown for screen selection must be activated in the list above: the last option...
TV-Server Version:
MediaPortal Version: 0.2.3.0
MediaPortal Skin: BlueTwo
Windows Version: Vista 32
CPU Type: Intel Core 2 Duo...
Dtv2000 H
I was wondering if you could help me out as it has been 3 weeks of fiddling around now.
This is my code:
<capturecard commercialname="WinFast DTV2000 H Digital" capturename="WinFast DTV2000 H BDA Transport Stream Capture" devid="ven_14f1&dev_8802&subsys_6f2b107d&rev_05">
<capabilities tv="true"...
Dtv2000 H
I was wondering if you could help me out as it has been 3 weeks of fiddling around now.
This is my code...
Hi there,
I know there's a lot of threads relate to this problem, but I have been trying whole weekend solve how add this card...
HELLO
I install media portal V0.2.3.0. but the remote mce refuse to work with m.p
i install from huppauge site, the ir32.exe and still it want work.
please help me
HELLO
I install media portal V0.2.3.0. but the remote mce refuse to work with m.p
i install from huppauge site, the ir32.exe...
HELLO
I install media portal V0.2.3.0. but the remote mce refuse to work with m.p
i install from huppauge site, the ir32.exe...