Installation, configuration support (51 Viewers)

Having trouble installing or configuring MediaPortal?
hello, i have the following problem: i bought a microsoft mce remote, plugged the remote in the usb-prt. In the device manager i have an entry "Microsft eHome Infrared Transceiver". i have checked the checkbox under "remote" for the mce remote, but when i start mediaportal, nothing happens when i press a button on the remote. i...
hello, i have the following problem: i bought a microsoft mce remote, plugged the remote in the usb-prt. In the device manager...
hello, i have the following problem: i bought a microsoft mce remote, plugged the remote in the usb-prt. In the device manager...
Replies
0
Views
1K
I guess then maybe you need to read the entire thread: Leadtek Winfast 2000 XP
I guess then maybe you need to read the entire thread: Leadtek Winfast 2000 XP
Hi I am new to media portal, though have read all the documentation I could find to resolve this problem, including searching these...
Replies
9
Views
2K
So, I was under the impression that if you were interested in doing hdtv in the US, you had to do it ATSC because hdtv over cable is encrypted. However, I am now confused because I only have basic cable, no cable card in my phillips plasma and it is picking up lots of hdtv channels when I set it to autoprogram for cable. When I...
So, I was under the impression that if you were interested in doing hdtv in the US, you had to do it ATSC because hdtv over cable...
So, I was under the impression that if you were interested in doing hdtv in the US, you had to do it ATSC because hdtv over cable...
Replies
0
Views
1K
Any other suggestions?
Any other suggestions?
Hi, I'm new to MediaPortal and I have to say it's really great! There is one problem, though, I could now solve by searching...
Replies
3
Views
2K
MediaPortal Version: 0.2 MediaPortal Skin: MCE Windows Version: XP Profesional English CPU Type: Intel Dualcore HDD: 4O GB Memory: 512 Motherboard: Motherboard Chipset: Motherboard Bios: Video Card: Video Card Driver: Sound Card: Sound Card AC3: Sound Card Driver: 1. TV Card: MSI DigiVOX A/D II 1. TV Card Type...
MediaPortal Version: 0.2 MediaPortal Skin: MCE Windows Version: XP Profesional English CPU Type: Intel Dualcore HDD: 4O GB...
MediaPortal Version: 0.2 MediaPortal Skin: MCE Windows Version: XP Profesional English CPU Type: Intel Dualcore HDD: 4O GB...
Replies
0
Views
2K
MP1 MP2 Aver 771 DE
Avermedia DVB-T 771 Sorry i didnt give the card its fully sunday name before, its an...... Avermedia DVB-T 771 card.
Avermedia DVB-T 771 Sorry i didnt give the card its fully sunday name before, its an...... Avermedia DVB-T 771 card.
Hi, I downloaded mediaportal yesterday and it looks pretty decent - but unfortunatly it doesnt recognise my TV card. I got an...
Replies
2
Views
1K
Nobody knows? :( I'd like to try MP
Nobody knows? :( I'd like to try MP
Area: Media Portal Program MediaPortal Version: 0.2.2.0 (2006-12-21) MediaPortal Skin: BlueTwo Windows Version: Windows XP (SP2)...
Replies
2
Views
2K
Hi I read in the manual this: ---------------------------------------------------------------------------------------- Capture CardTV Capture Card Priority - Default: 1 Frame size 768x576 PAL square pixels 720x576 PAL/SECAM ITU-601 D1 (recommended) 720x480 NTSC ITU-601 D1 (recommended) 704x576 PAL/SECAM TV broadcast...
Hi I read in the manual this: ---------------------------------------------------------------------------------------- Capture...
Hi I read in the manual this: ---------------------------------------------------------------------------------------- Capture...
Replies
0
Views
2K
MediaPortal Version: The latest stable release MediaPortal Skin: default Windows Version: Windows XP CPU Type: AMD 3000+ HDD: 2 80 gig harddrives Memory: 1 gig Motherboard: ASUS A8V Deluxe Motherboard Chipset: Nvidia? Motherboard Bios: Dunno Video Card: Nvidia 5500 AGP Video Card Driver: dunno.. Sound Card: On board Sound...
MediaPortal Version: The latest stable release MediaPortal Skin: default Windows Version: Windows XP CPU Type: AMD 3000+ HDD: 2...
MediaPortal Version: The latest stable release MediaPortal Skin: default Windows Version: Windows XP CPU Type: AMD 3000+ HDD: 2...
Replies
0
Views
1K
I'm slowly thinking it may be a reception problem, since it only occurs when watching TV. The pictrue dough is very good... I know the analog reception here is awful, so digital reception might not be much better.
I'm slowly thinking it may be a reception problem, since it only occurs when watching TV. The pictrue dough is very good... I know...
MediaPortal Version: 0.2.1 MediaPortal Skin: Windows Version: XP CPU Type: AMD64 3200 HDD: 80G Memory: 2G Motherboard: ASUS...
Replies
4
Views
2K
Hello, this is my first post.... I think that medaiportal is fantastic.... but i have one problem. When i use Restore Channel i don't see (NO SIGNAL). My tv is DVB-S with 3 lnb. Into mediaportal. log i read that LNB = 0 and DISEQC = None. But when i scan the channel, i see all with all my 3 LNB without any problem. Help...
Hello, this is my first post.... I think that medaiportal is fantastic.... but i have one problem. When i use Restore Channel...
Hello, this is my first post.... I think that medaiportal is fantastic.... but i have one problem. When i use Restore Channel...
Replies
0
Views
805
MediaPortal Version: 0.2.2.0 MediaPortal Skin: Blue Two Wide Windows Version: Windows XP Pro SP2 CPU Type: AMD 1900+ HDD: WD 300GB Memory: 512MB PC2100 Motherboard: ABIT KR7A Motherboard Chipset: VIA Motherboard Bios: AMI Video Card: eGeForce 7600GS Sound Card: Creative SB Live! 1. TV Card: pcHDTV 5500 1. TV Card Type...
MediaPortal Version: 0.2.2.0 MediaPortal Skin: Blue Two Wide Windows Version: Windows XP Pro SP2 CPU Type: AMD 1900+ HDD: WD...
MediaPortal Version: 0.2.2.0 MediaPortal Skin: Blue Two Wide Windows Version: Windows XP Pro SP2 CPU Type: AMD 1900+ HDD: WD...
Replies
0
Views
2K
Ok, time for an update. After watching TV for a few minutes this morning, MediaPortal frooze. I closed MP, but after restarting, I couldn't watch TV anymore. (Unable to start TV - Failed to create graph.) I restarted my computer, and after that I only got static on the TV! Ran PowerCinema 4 (that was supplied with my card) and the...
Ok, time for an update. After watching TV for a few minutes this morning, MediaPortal frooze. I closed MP, but after restarting, I...
Hi all, I know this a very tiny annoyance, but I would like to hear your comments on this. The TV channel preview in Setup...
Replies
1
Views
2K
any1?
any1?
Pc: Asus Barbone Pundit P1-PH1 CPU: intel cel 3.06 ghz, s775 512 mbb ddr II Hye! i did not find it out here so i...
Replies
1
Views
1K
MP1 MP2 iMon / VFD display DE
Which Version of the iMon-Software do you use? I use 4.51.0202. If I enable "Programm Dritter benutzt iMon Treiber" the remote doesn`t work and the Display shows "Plug-In Mode".
Which Version of the iMon-Software do you use? I use 4.51.0202. If I enable "Programm Dritter benutzt iMon Treiber" the remote...
MediaPortal Version: 0.2.2.0 HTPC Case: Ahanix MCE-302 Remote: iMon Pad My new media portal setup is finally all going well...
Replies
2
Views
3K
...
...
MediaPortal Version: 2.0.4 Windows Version: WinXP 1. TV Card: Twinhan DTV Sat CI 1. TV Card Driver: 2.64 Satelite/CableTV...
Replies
2
Views
2K
Problem solved. I had to re-install Windows XP SP1 SP1 Constantinos
Problem solved. I had to re-install Windows XP SP1 SP1 Constantinos
MediaPortal Version: 0.2.2 MediaPortal Skin: Default Wide Windows Version: Windows XP SP2 CPU Type: AMD Athlon X2 3800+ AM2...
Replies
1
Views
1K
Hi, I'm running 0.2.2.0 and I'm trying to use the Bass music player to use Sonique visualizations. But, whenever a visualization runs, it will only run the visualization that is selected in Windows Media Player. The bass music player is selected in the Music configuration, and the Sonique visualization is selected inside the music...
Hi, I'm running 0.2.2.0 and I'm trying to use the Bass music player to use Sonique visualizations. But, whenever a visualization...
Hi, I'm running 0.2.2.0 and I'm trying to use the Bass music player to use Sonique visualizations. But, whenever a visualization...
Replies
0
Views
989
Hi, I'm a total newbie to using this program and am trying it out beceuase everything else for PC seems to really suck and open source rules! I have a hybrid TV tuner card and MediaPortal seems to be willing to only recognize the ATSC tuner and not NTSC tuner. Also, when I go into the configuration utility (outside of the...
Hi, I'm a total newbie to using this program and am trying it out beceuase everything else for PC seems to really suck and open...
Hi, I'm a total newbie to using this program and am trying it out beceuase everything else for PC seems to really suck and open...
Replies
0
Views
2K
Okay thanks for your reply rtv :)
Okay thanks for your reply rtv :)
Hi, I have a quick question, I have to TV Tuner cards in my pc (installed in the riser I believe), I've disabled the one Im...
Replies
2
Views
1K
I have a ATI ALL-IN-WONDER X1900 I tried version 0.2.0, It work perfectly,,, Version 0.2.1 or 0.2.2 have sound stuttering when changing channels It is normal, related to T200 Driver ?
I have a ATI ALL-IN-WONDER X1900 I tried version 0.2.0, It work perfectly,,, Version 0.2.1 or 0.2.2 have sound stuttering when...
I have a ATI ALL-IN-WONDER X1900 I tried version 0.2.0, It work perfectly,,, Version 0.2.1 or 0.2.2 have sound stuttering when...
Replies
0
Views
696
Hi Thanks for you reply. I tried scan with out the CAM and also had the PID unchecked. I installed the My teather S/W there was with the Floppy DTV and there i found 200 channals! So the channals are there somewhere. Its must be something in MP there blocking the scan (i think??) Best regards Lars
Hi Thanks for you reply. I tried scan with out the CAM and also had the PID unchecked. I installed the My teather S/W...
Hi. I got a problem with my Floppy DTV-C when scanning channals. I was am able to get pay channals (channal+ and TV1000) but...
Replies
2
Views
1K
As you have a working graph and have audio and video there should be NO problems with capture/recording. To use the composite/svhs inputs you need to add these into the channel settings for the AIW in the MP configuration, also ensure that they are assigned to card and channels. From your info I see that your card is AGP which...
As you have a working graph and have audio and video there should be NO problems with capture/recording. To use the...
MediaPortal Version: 0.2.2.0 MediaPortal Skin: Blue two Windows Version: Windows XP SP2 CPU Type: Intel Pentium 4, 1.80 GHz...
Replies
27
Views
4K
That's not possible, maybe Girder or HIP might help.
That's not possible, maybe Girder or HIP might help.
Hi, first of all: MP is the best :-) Billy looks very old with his mce my problem: i want to map a button of my mce rc to a...
Replies
1
Views
2K
Area: Skin MediaPortal Version: 0.2.2.0 (2006-12-21) MediaPortal Skin: BlueTwo wide Windows Version: Windows XP (SP2) .NET CLR Version: 2.0.50727 DirectX Version: 4.09.00.0904 (9.0c) Audio Codec: MPA Decoder Filter Video Codec: DScaler Mpeg2 Video Decoder CPU Type: Intel Pentium M 1.86GHz Memory: 1 GB Motherboard: FD11V10...
Area: Skin MediaPortal Version: 0.2.2.0 (2006-12-21) MediaPortal Skin: BlueTwo wide Windows Version: Windows XP (SP2) .NET CLR...
Area: Skin MediaPortal Version: 0.2.2.0 (2006-12-21) MediaPortal Skin: BlueTwo wide Windows Version: Windows XP (SP2) .NET CLR...
Replies
0
Views
1K
here's the link ... http://www.twinhan.com/Deutsch/download_driver&software_D.asp
here's the link ... http://www.twinhan.com/Deutsch/download_driver&software_D.asp
MediaPortal Version: 0.2.1.0 MediaPortal Skin: Windows Version: XP SP2 CPU Type: P4 2,6 HDD: Memory: 768 MB Motherboard...
Replies
6
Views
3K
Hi All: Just picked up a NTSC/ATSC HDTV hybrid PCI card, which I fear may now be an expensive wind-chime component. It does work (TotalMedia3 came with it) but the oem software is a lot to be desired IMHO. I'm not a code monkey by any stretch; but if anyone has any ideas, I'm grateful. I attached a filtercheck & dxdiag for those...
Hi All: Just picked up a NTSC/ATSC HDTV hybrid PCI card, which I fear may now be an expensive wind-chime component. It does...
Hi All: Just picked up a NTSC/ATSC HDTV hybrid PCI card, which I fear may now be an expensive wind-chime component. It does...
Replies
0
Views
923
hi out there I have tried to use the tvengine 03 beta instead - hereby can I use both the DVB-T & DVB-S (disabled the analoug interface to save CPU) - the tvengine and client interface are still unstable but I think this might be the right way to go - the conecept of splitting the MP up into seperate services is also brilliant so...
hi out there I have tried to use the tvengine 03 beta instead - hereby can I use both the DVB-T & DVB-S (disabled the analoug...
MediaPortal Version: 0.2.2.0 MediaPortal Skin: XMas 2006 Windows Version: Windows XP MCE 2005 CPU Type: 550MHz Intel HDD: 20GB...
Replies
3
Views
2K
He he he! Forgot I had a firewall :)
He he he! Forgot I had a firewall :)
MediaPortal Version: 0.2.2 MediaPortal Skin: BlueTwo Windows Version: Windows XP Pro SP2 CPU Type: AMD Turion64 2.6GHz HDD...
Replies
1
Views
2K
OK. Got it sorted. I reinstalled/re-registered some of the direct show filters. - Dave
OK. Got it sorted. I reinstalled/re-registered some of the direct show filters. - Dave
MediaPortal Version: 0.2.2.0 MediaPortal Skin: BlueTwo Windows Version: Windows XP SP2 [+updates] CPU Type: AMD 64 3000+ HDD...
Replies
1
Views
1K
Top Bottom