I have purchased the pc-control remote (RF) with mouse control from Marmitek. Works fine on my computer, but have a few issues.
1 I had to install Showshifter (together with driver) from cd to make it work on my XP Home laptop. Showshifter is rubbish, but as soon as I deinstall, the remote doesn't work anymore. I need to deinstall...
I have purchased the pc-control remote (RF) with mouse control from Marmitek. Works fine on my computer, but have a few issues...
I have purchased the pc-control remote (RF) with mouse control from Marmitek. Works fine on my computer, but have a few issues...
Hi guys.
I am wondering how to can get the most resolution out of a 3D BluRay backup through a passive-3D TV.
My passive 3DTV outputs the left and right eye frames at the same time (unlike active which switches each eye). To achieve this with only 1920x1080 pixels to work with, the TV polarises the first row of pixels for one eye...
Hi guys.
I am wondering how to can get the most resolution out of a 3D BluRay backup through a passive-3D TV.
My passive 3DTV...
Hi guys.
I am wondering how to can get the most resolution out of a 3D BluRay backup through a passive-3D TV.
My passive 3DTV...
Can't believe it's been this long! I first started out with XBMC on the original Xbox in 2004 then Mediaportal popped up and have been using it ever since.
Can't believe it's been this long! I first started out with XBMC on the original Xbox in 2004 then Mediaportal popped up and have...
Congrats on the 10th anniversary of Mediaportal!
Does anyone has the exact starting date? I didn't get any further than feb-2004...
there are so many member who miss the missing of delusion,well welcome back on board delusion,well I wont call the paranoid,seems that is feels odd to me
there are so many member who miss the missing of delusion,well welcome back on board delusion,well I wont call the paranoid,seems...
And so, yet another week starts without Ray.
It's been more than a month now :(
I have been reading a very long thread on the avs forum about overriding EDID codes for vista and wondered if others have faced this issue. I apologise that this is not specifically a MediaPortal issue but MP users like me probably strike this more than most.
EDID Override Thread - AVS Forum
My scenario:
HTPC running...
I have been reading a very long thread on the avs forum about overriding EDID codes for vista and wondered if others have faced...
Thanks, MM. Part of the issue seems to be a possible intermittent connection by the cable to the IR receiver or the plug into the tuner card.
It is working now! Thanks again
Thanks, MM. Part of the issue seems to be a possible intermittent connection by the cable to the IR receiver or the plug into the...
I am cutting the cable and am wondering if MP can record over the air TV. I understand that I need a tuner but I would need MP to...
Strange not to read anything about The Godfather..
There's no feature richer tool to organize your music files..
DON'T do this..
You rape the iso and serveral other standards because your filename WILL get to long sometimes..
Even if you don'd mind the problems it is really annoying to have warnings on burn attempts, endless...
Strange not to read anything about The Godfather..
There's no feature richer tool to organize your music files..
DON'T do this...
Hi All,
I have a bunch of MP3 and lots of songs in various formats. I can see and play all of the on MediaPortal but they are...
TV-Links - More then you should need as it's an aggregator for other sites that host TV shows
Vimeo - Has different content the Hulu, but pretty much the same thing
Fancast - Much like TV-Links. Takes info from Hulu, Vimeo, etc. and puts it all in one place
TVDuck - Another online linker to different sites
Really, just Google it.
TV-Links - More then you should need as it's an aggregator for other sites that host TV shows
Vimeo - Has different content the...
Not sure where to post this, so its going here :)
I'm looking for websites that provide tvshows content online. Here is what i...
Hi all,
Alan from MissingRemote.com. Sorry for the late notice, but I wanted to let you know about our Omaura HTPC case review and our giveaway.
The giveaway ends at 12:01 Monday November 25th, 2007. Again sorry for the late notice.
1st Prize (Valued at $1700 MSRP) - Winner's choice of TF5 or TF8 or TF11 + TF HDD + TF TFT +...
Hi all,
Alan from MissingRemote.com. Sorry for the late notice, but I wanted to let you know about our Omaura HTPC case review...
Hi all,
Alan from MissingRemote.com. Sorry for the late notice, but I wanted to let you know about our Omaura HTPC case review...
I have a new workstation (Q6600 with 4GB RAM) and now I am not sure how to install...
My drives:
1x WD 250GB 7200
3x WD 500GB 7200
OS:
Vista Ultimate x64
MB:
Asus P5E
Options:
1) - Vista and software/drivers on RAID-0 on 250GB drive.
- RAID-5 with 3x 500GB drives for data/backup.
2) - Vista and software/drivers...
I have a new workstation (Q6600 with 4GB RAM) and now I am not sure how to install...
My drives:
1x WD 250GB 7200
3x WD 500GB...
I have a new workstation (Q6600 with 4GB RAM) and now I am not sure how to install...
My drives:
1x WD 250GB 7200
3x WD 500GB...
Nview desktop manager can do this.
Enable the desktop manager and create profiles, when done with that you can assign hotkeys to load the profiles.
(tip: hotkeys are profile related, so in every profile you'll have to setup the hotkeys)
I have this setup to swich between: desktop monitor/tv and beamer and also desktop monitor...
Nview desktop manager can do this.
Enable the desktop manager and create profiles, when done with that you can assign hotkeys to...
Anybody knows if there is any utility that allows to switch between monitors (TV and TFT) from command line parameters?
Thanks...
I have the same issues, and have had with 91.xx and up drivers.. I suspect the GFX card is overheating.. Haven't looked more into it though...
Apart from that, 93.71 works like a charm on my 6600 - And I do suspect, so far, that they've fixed a stop error I had with MP.. Pasted :
28-11-2006 01:42:04 453 [ERROR] AllocResources...
I have the same issues, and have had with 91.xx and up drivers.. I suspect the GFX card is overheating.. Haven't looked more into...
Just a quick note to say there are new NVIDIA drivers out. They are WHQL of the PureVideo HD driver. As always, even though they...
I was wondering if it is worth adjusting the edge enhancement and noise reduction in the nVidia driver settings for watching TV? I am using the purevideo codec with a 7900gt.
If anyone has any good tips for adjustments or has any good settings for noise reduction and edge enhancement could you please list them here.
Thanks :)
I was wondering if it is worth adjusting the edge enhancement and noise reduction in the nVidia driver settings for watching TV? I...
I was wondering if it is worth adjusting the edge enhancement and noise reduction in the nVidia driver settings for watching TV? I...
Since MP uses NSIS i'm hoping sonme of you can help me with the following 2 problems:
I have a NSIS installationprogram, and when uninstalling it will not remove the "root" folder of my program ($INSTDIR) (Even though it is empty) I know i can force a delete or have it deleted on reboot but i will not do that if possible...
Since MP uses NSIS i'm hoping sonme of you can help me with the following 2 problems:
I have a NSIS installationprogram, and...
Since MP uses NSIS i'm hoping sonme of you can help me with the following 2 problems:
I have a NSIS installationprogram, and...
Removed all drives allready, tride to unplug some connectors on the board to see if that makes any difference but nothing changes.
Ones again ThX for the input guys....
But I gave up on it, RIP (damn that hurts, damn machine won on me ;) )
Greetz Jan
Removed all drives allready, tride to unplug some connectors on the board to see if that makes any difference but nothing changes...
Hey guys..... Happy new year to all...
My sister got a notebook that doesnt work anymore she asked me to have a look at it but...
Try:
AVforum.no - HTPC - HomeTheaterPC (teknisk -og prisdiskusjon)
-> AVforum.no - Fakta: Oversikt over Digitale TV tjenester for de som bygger HTPC
and
MSPC Forum
GET is not HTPC friendly ... just like Lyse ("Alt i box").
Try:
AVforum.no - HTPC - HomeTheaterPC (teknisk -og prisdiskusjon)
-> AVforum.no - Fakta: Oversikt over Digitale TV tjenester for...
Hey, i start this thread because i find it hard to locate the info i require.
Mainly in Norway we can get DTV trough...
Good afternoon,
Ages ago, I acquired a PCI DVB-S tuner card, which I've never used for anything. Is there anything worth getting with setting up a DVB-S/S2 card and satellite dish in North America? I can't seem to find any good, true FTA channel lists for North America, and what I can find either appears to be religious, or...
Good afternoon,
Ages ago, I acquired a PCI DVB-S tuner card, which I've never used for anything. Is there anything worth getting...
Good afternoon,
Ages ago, I acquired a PCI DVB-S tuner card, which I've never used for anything. Is there anything worth getting...
saw this pcmag article that mentioned MePo as a WMC replacement. "6 Features Disappearing in Windows 10 (and How to Replace Them)" http://www.pcmag.com/article2/0,2817,2485170,00.asp
saw this pcmag article that mentioned MePo as a WMC replacement. "6 Features Disappearing in Windows 10 (and How to Replace Them)"...
Looks like MS officially dropped his media center...
I must say I feel very stupid, but I resolved the issue.
I have rebuilt my HTPC 7 times now to try and get it right, plus an upgrade of CPU, MOBO, RAM and OS.
I have MP v1.1.0 RC1 running perfectly on my system (tv server not configured yet).
BUT
I have spent the last hours trying to work out why DVD's played back with...
I must say I feel very stupid, but I resolved the issue.
I have rebuilt my HTPC 7 times now to try and get it right, plus an...
I must say I feel very stupid, but I resolved the issue.
I have rebuilt my HTPC 7 times now to try and get it right, plus an...