Hi joystick
Just a thought, but when you upgraded from 0.2.3 the WebEPG.xml file was deleted and rewritten wasn't it? While it probably would be if you installed to the default location, I am not sure if this is the case or not if you amend the path.
I ask this because I think that a while ago (one of the MediaPortal 1.0.0.0...
Hi joystick
Just a thought, but when you upgraded from 0.2.3 the WebEPG.xml file was deleted and rewritten wasn't it? While it...
HI all,
I wanted to configure my latest MP install (latest RC2 SVN) migrating from 0.2.3 and found out that Web-EPG can now...
Hi,
i have an idea for Web EPG.
If WebEPG grabbing is started - you have a litte Icon like the MP - like the red recording ball.
So you know that EPG grabbing is runnig. If it failes, you get another icon to check the Logfile...
Another method is to have an own menu for WebEPG in MP.
And if WEBEPG failes three times - you...
Hi,
i have an idea for Web EPG.
If WebEPG grabbing is started - you have a litte Icon like the MP - like the red recording...
Hi,
i have an idea for Web EPG.
If WebEPG grabbing is started - you have a litte Icon like the MP - like the red recording...
It is not ignored. At least not at the latest SVN. But it gets it wrong. The recoreded file name it has the wrong number. It's the correct number + 1.
It is not ignored. At least not at the latest SVN. But it gets it wrong. The recoreded file name it has the wrong number. It's the...
I am trying to write a new grabber for WebEpg. So far the result looks good, but the episode-num field seems to be ignored by...
Hi Iceman
Assuming you install MediaPortal to the default location, WebEPG.exe and WebEPG-conf.exe are in C:\Program Files\Team MediaPortal\MediaPortal.
Mew
Hi Iceman
Assuming you install MediaPortal to the default location, WebEPG.exe and WebEPG-conf.exe are in C:\Program Files\Team...
After a few weeks struggling to get webepg to work, I finally have WebEPG running successfully. I thought others could benefit from...
C:\Program Files\Team MediaPortal\MediaPortal, there you will find WebEPG config and exe files.
Also you made need to copy the xmltv.dtd file over to xmltv folder at above location.
Too find xmltv.dtd, MP config\users files link at top left, there you will find another xmltv folder that it will need to be copied from...
C:\Program Files\Team MediaPortal\MediaPortal, there you will find WebEPG config and exe files.
Also you made need to copy the...
Can someone please tell me where I can get WebEPG from. I am having trouble getting tv listings setup in MediaPortal and its...
Wow, did not even know this site existed, just googled it, no need to be shy, take it American Forces Network is the correct description.
Have never heard any reference to this here, but hopefully someone will come to your aid with the answer.
Any offset time can be set in importer ie xmltv plugin, accessed within TVServer config...
Wow, did not even know this site existed, just googled it, no need to be shy, take it American Forces Network is the correct...
Hey,
Anyone use WebEPG with MP and AFN? I'm interested to know your configuration (e.g., how to do it??). I've been using MP...
I am writing a grabber file. To get full description of a program I need to use sublink. The reference has the following format:
<a href="javascript:openWin('/Ext/App/Ency/Items/CdaEncyNavigation/0,8924,1319300-6139552,00.html','Display','menubar=no,resizable=no,scrollbars=yes,width=449,height=470')" class=smallheader>
To...
I am writing a grabber file. To get full description of a program I need to use sublink. The reference has the following format...
I am writing a grabber file. To get full description of a program I need to use sublink. The reference has the following format...
I have submitted a patch for WebEPG
SourceForge.net: Detail: 2094512 - WebEPG Automap improvements
Please take a look on it. Thanks.
I have submitted a patch for WebEPG
SourceForge.net: Detail: 2094512 - WebEPG Automap improvements
Please take a look on it. Thanks.
I have submitted a patch for WebEPG
SourceForge.net: Detail: 2094512 - WebEPG Automap improvements
Please take a look on it. Thanks.
The problem is with the Spanish language. "European Standard Time" translate to "estándar", and maybe that accent is the problem. Changing the Vista language to English fixes the problem, although it's not a real solution for the problem...
The problem is with the Spanish language. "European Standard Time" translate to "estándar", and maybe that accent is the problem...
Hi, I am trying to get the guide working as explained in several tutorials here.
However, my "tvguide-writing.xml" gets stuck...
Seems this is thread that is revived once a year :P
I actually found out that this is possible now. I didn't notice this, until recently, when I have changed to the skin Titanium. If you go into search, there is a list of genres. But, not every genre (like Action-movie,ACtion-adventure-movie, Drama, Drama-comedy and so on). Now it...
Seems this is thread that is revived once a year :P
I actually found out that this is possible now. I didn't notice this, until...
Ok I must be missing something because iv searched the forums with no luck
One of the MAJOR features of MCE for me its its...
ok thanks PD, I'm surprised nobody has asked in the past for series, episode information as you're right digiguide is so much better than the OTA guide.
Presumably it wouldn't be that hard to add %series% %episode% to the %description% builder in TV3 and just fudge the description field together.
ok thanks PD, I'm surprised nobody has asked in the past for series, episode information as you're right digiguide is so much...
Hi All
I'm trying to use Digiguide data in TV3 but don't get any data, I can configure WebEPG to get all the data from...
I have i little but annoying problem, the problem is that WebEPG start every time the computer wakes up from S3. I have both the TV-server and MP set to grap EPG at 12:00 and what I can see, the computer wakes upp at that time and grabs the EPG and all is fine, then the computer goes into S3 again, so that is working fine, but when I...
I have i little but annoying problem, the problem is that WebEPG start every time the computer wakes up from S3. I have both the...
I have i little but annoying problem, the problem is that WebEPG start every time the computer wakes up from S3. I have both the...
Hello,
I built a working grabber for the french part of Switzerland, but by now it only grabs starttime, title, and genre because I cannot manage to extract the sublink from the following javascript :
<a href="javascript:openDet(180,5678333);" class="newsLink">Friends</a>
must be transformed in...
Hello,
I built a working grabber for the french part of Switzerland, but by now it only grabs starttime, title, and genre because...
Hello,
I built a working grabber for the french part of Switzerland, but by now it only grabs starttime, title, and genre because...
I second that. I also has a "woobly" internet connection and sometimes end up with a tvguide thats only 2kb, in other words empty.
I would love if the old tvguide could be saved and compared to the new before it is used.
Sometimes I dont turn on the htpc for days and have to rely on the tvguide to work for it to record. To find that...
I second that. I also has a "woobly" internet connection and sometimes end up with a tvguide thats only 2kb, in other words empty...
I have webEPG scheduled to run daily to grab the latest program information. It works great most of the time, but once or twice my...
Hi all, I noticed a bug in WebEPG-conf.exe that has been around for ages. If you select muliple channels and click "Remove" you get this unhandled exception (see screenie).
Also would it be possible to have the channel list alphabetically sortable, it would make it easier to find channels in the selection window as these are also...
Hi all, I noticed a bug in WebEPG-conf.exe that has been around for ages. If you select muliple channels and click "Remove" you get...
Hi all, I noticed a bug in WebEPG-conf.exe that has been around for ages. If you select muliple channels and click "Remove" you get...
I had similar problems with changes to 20min.ch and was also unsuccessful in fixing the grabber.
I gave up and am now pulling all info from fernsehen.ch (grabber attached).
Hope that helps!
I had similar problems with changes to 20min.ch and was also unsuccessful in fixing the grabber.
I gave up and am now pulling all...
Hi
I'm writing a new grabber for 20min.ch because the old one doesn't work any more. now the grabber xml look like:
<?xml...
well the scheduled task still runs
puts in right location
all good
but there is a odd charector i think in the xml file now when i was at 2.3 not rc 1
it would right a log file and tell me which line (happen once maybe twice a month)
a show would have a funny chareftor in and would remove manully all would be good
but sone at...
well the scheduled task still runs
puts in right location
all good
but there is a odd charector i think in the xml file now when...
well the scheduled task still runs
puts in right location
all good
but there is a odd charector i think in the xml file now when...
Thanks !! i guess i will stick with dvb-t epg as i dont mind the time waiting and i will get more info.
thanks anyway.
btw. i hope your 2nd T500 is working as good as my 1st one is. ;)
Thanks !! i guess i will stick with dvb-t epg as i dont mind the time waiting and i will get more info.
thanks anyway.
btw. i...
Hi.
This is the updated version of the grabber for Programacion TDT de la Television Digital Terrestre.
Channels Added...
Anyone here that also has problem with the sol-detailed grabber in webepg? For me it adds wrong description to programs. Haven't looked into it yet..but always nice to know if i'm the only one experiencing problems :)
Anyone here that also has problem with the sol-detailed grabber in webepg? For me it adds wrong description to programs. Haven't...
Anyone here that also has problem with the sol-detailed grabber in webepg? For me it adds wrong description to programs. Haven't...
yup, it was probably like ronilse said: a database malfunction.
yup, it was probably like ronilse said: a database malfunction.
I cant get WebEPG to work...
Her is the Webepg.log
2008-06-29 14:34:00.562500 [Info.][1]: WebEPG: Starting
2008-06-29...
I have the same problem... https://forum.team-mediaportal.com/webepg-136/no-info-tvguide-xml-41685/
I have the same problem... https://forum.team-mediaportal.com/webepg-136/no-info-tvguide-xml-41685/
I tested by installing just three channels in webepg-config the first time and then I ran webepg.exe. The file just became 1kb and...
Meraz, it will not be fixed. Tv2Day have stopped their EPG services.
The only way is to write a grabber for another site.
I may do it, if I'll find the time.
Meanwhile I sugget you use TVxb. The grabbing from ynet works. It is not as easy as using WebEPG, but it more or less does the job.
Meraz, it will not be fixed. Tv2Day have stopped their EPG services.
The only way is to write a grabber for another site.
I may...
Can anyone please assist me?
I'm trying to run WEBEPG, and it creates the TVguide-writing.xml, but stops uncompleted.
Checking...
OK. I changed the web for the french channel and finally the TVGuide was written!
Let's see know if I learn how to update the guide and all the things related to it.
Thank you.
Well, the first issue I encountered after getting the TVGuide to be written is that now the dates o the guide are having problems to be transferred to...
OK. I changed the web for the french channel and finally the TVGuide was written!
Let's see know if I learn how to update the...
I have changed some channel ID to some of my channels. When i start MP nothing have changed, the old id still shows in my tvguide...
At first you have to go to another webpage to set the bundle of channels. Th cookie is created for whole website and if you go to the webpage with the program listing, the cookie have to be given to the site to you can see the chosen channel. If you don't give this cookie, you get the site listing with some prechosen channels.
So...
At first you have to go to another webpage to set the bundle of channels. Th cookie is created for whole website and if you go to...
Hi all.
There is very well tvprogram for Czech channels on the www.sms.cz but they use cookies for some navigation on the site...
Hi Khurram,
I think you can just use the utils.dll from a recent MP installation.
/Peter
Hi Khurram,
I think you can just use the utils.dll from a recent MP installation.
/Peter
Hello!
I've had some problems with WebEPG not picking up all information properly. I started to design/modify the grabber file...
In webepg-conf, I can import the list of channels from MP or TVServer. What about importing it from a text file? If not, then maybe I can manipulate the file used to store the channel list by webepg-conf. Where does webepg-conf store this information?
Thanks,
Khurram.
In webepg-conf, I can import the list of channels from MP or TVServer. What about importing it from a text file? If not, then maybe...
In webepg-conf, I can import the list of channels from MP or TVServer. What about importing it from a text file? If not, then maybe...
Well i've taken a look at imdb and how their posting works for their listing and have modified the grabber file to my zip and provider and the channels i receive so i will test it hopefully this afternoon soon as my isp gets their crap together :)
Well i've taken a look at imdb and how their posting works for their listing and have modified the grabber file to my zip and...
I have Cox Basic Cable (Limited Basic Actually) and I setup Webepg and imported the channels and the chanel listings but when i run...
Tyrann: Good tip! I can now see the .xml file in the xmltv folder, but there isn't any xmltv.dtd. Why might that be?
EDIT: OK, I copied the xmltv.dtd from the xmltv folder in the regular program folder for Mediaportal. It now seems to create a tvguide file as it is supposed to. It ends up to be something like 170kb, does that seem...
Tyrann: Good tip! I can now see the .xml file in the xmltv folder, but there isn't any xmltv.dtd. Why might that be?
EDIT: OK, I...
I have recently installed MP RC1 and am planning to use webEPG. I have had webPEG working before, then it was just a simple matter...
sorry if this is a stupid question, but is it possible to do all the EPG stuff just on Server-site?
I have a dedicated TVServer (based on WHS) and I want to update and manage my EPG data directly there.
The WebEPG program is installed on my HTPC client and not with the Server. Is it possible to install WebEPG on the server and...
sorry if this is a stupid question, but is it possible to do all the EPG stuff just on Server-site?
I have a dedicated TVServer...
sorry if this is a stupid question, but is it possible to do all the EPG stuff just on Server-site?
I have a dedicated TVServer...
I found the solution to this! :D I had to untick all the channels in TV Epg Grabber tab of TV Server Config.
Now my epg is pretty much complete apart from a few channels for which the grabber failed or which are missing in the grabber list (e.g. History HD, Silver HD).
I found the solution to this! :D I had to untick all the channels in TV Epg Grabber tab of TV Server Config.
Now my epg is pretty...
I need some help with webepg - I followed the webepg guide in the manual and the XmlTv guide in the wiki. I have imported the...