[solved] Dynamic refresh rate not working (2 Viewers)
- Thread starter mathem
- Start date
- March 17, 2009
- 5
- 0
Tried with 1.20, update Bios, revert to older Intel drivers...... Same !
- April 23, 2007
- 755
- 79
- Home Country
-
Here you go Seb. It looks like playback actually works for the first time after mediaportal starts. It is on the second and subsequent playback attempts that it fails. You should see that in these logs.
- August 4, 2007
- 861
- 99
- Home Country
-
Spain
- Moderator
- #84
So? Is 1.21 safe? Or is there a roll back regarding this issue? Did you have the time to take a look @Sebastiii ?
It might be worth looking through this thread for ideas/things to try - Sound stops working after first playback
Basically, there seems to be a problem with the Intel GPU drivers removing the HDMI audio renderer on refresh rate changes (and if you have no audio renderer playback won't work).
Basically, there seems to be a problem with the Intel GPU drivers removing the HDMI audio renderer on refresh rate changes (and if you have no audio renderer playback won't work).
FWIW, i'm using MP 1.21 Final, Windows 7 Ultimate x64, with AMD 5570 GPU with ATI catalysts driver version 13.12 and MP 1.21 DRR chaining is working quite nicely, no issues with audio or video.
Intel GPU hardware and drivers have always been very questionable for HTPC usage, there always seems to be issues.
Prior to using MP, i was a very long term Win 7 MCE HTPC user, but i just became too tired of having to put workarounds in place for such an aging unsupported application.
Since moving to MP, i've been able to back out all workarounds i had in place for Win 7 MCE, and the MP experience is so much better.
I especially like that there are so many config dials and knobs to tweak with.
Also really enjoying the MP 1.21 Final DRR changer.
Intel GPU hardware and drivers have always been very questionable for HTPC usage, there always seems to be issues.
Prior to using MP, i was a very long term Win 7 MCE HTPC user, but i just became too tired of having to put workarounds in place for such an aging unsupported application.
Since moving to MP, i've been able to back out all workarounds i had in place for Win 7 MCE, and the MP experience is so much better.
I especially like that there are so many config dials and knobs to tweak with.
Also really enjoying the MP 1.21 Final DRR changer.
Last edited:
- April 23, 2007
- 755
- 79
- Home Country
-
Still broken for me 
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Users who are viewing this thread
Similar threads
MP1
MP2
1.31.0
Reinstalled MP and now cannot get Fanarthandler to work correctly due to missing "externally managed" TV Series files.
DE
If anyone ever experiences the above, I found a fix. Removing and reinstalling MP-TVSeries fixed it. It must have gotten corrupted during the reinstall of MP. I also had to do the same with TRAKT which had some issues too that were not apparent at the time. All is well once again. :cool:
If anyone ever experiences the above, I found a fix. Removing and reinstalling MP-TVSeries fixed it. It must have gotten corrupted...
After much trial and error and comparing this computer with another that was working, I finally found out that Fanarthandler...
Hello,
i'm absent from MP forum since a while now,
looking your logs, your video is 23.96Hz, but your screen is already in 25hz, and after try to enable 50Hz ?
So, MP detecte 23 hz and want to switch TV to 25 hz, but can't
and MP want switch to 50hz
try to start change frequency before MP Start, on windows parameter.
i remember...
Hello,
i'm absent from MP forum since a while now,
looking your logs, your video is 23.96Hz, but your screen is already in 25hz...
After finally managing to get DRR working on my Intel Integrated Graphics 630 based setup, which was down to the default ON setting...
Works also, removed the "section" entry from MediaPortal.xml ;) (y)
Works also, removed the "section" entry from MediaPortal.xml ;) (y)
This plugin is alternate version to the original World Weather plugin developed by @Micropolis. Is compatible with MediaPortal...
OK, I found a way to make it work. It seems like MP-TV-series Configuration (and Moving Pictures Configuration) starts as Administrator, and the Administrator do not have yet logged in on the UNC \\192.168.222.247\Public even if the normal user on the PC have done it.
So to fix it on the Win 11 HTPC:
Created a shortcut to...
OK, I found a way to make it work. It seems like MP-TV-series Configuration (and Moving Pictures Configuration) starts as...
Hi!
I was running MP1.33 x64 and I was fine and happy since many years, then the hard drive on the HTPC died.
But I was able to...
@Brownard, just a stupid question.
Yes it works now by manually entering the path. However when i try to edit the settings (like because i want to disable the share watch)
I can select my Media Source, however i seems to only briefly been shown and the goes back to the list. So i cannot actually edit it.
Can et bee due to the "long"...
@Brownard, just a stupid question.
Yes it works now by manually entering the path. However when i try to edit the settings (like...
I had to replace my NAS and after reinstalling a new one i thought.
Lets modify the Media Source.
- However that did not work "if"...