SAA7134HL Cards DVB-T ? (1 Viewer)
- Thread starter Mortus
- Start date
A quick google search found http://www.semiconductors.philips.com/cgi-bin/pldb/pip/saa7134hl
Which says its an analogue or digital solution.
Which says its an analogue or digital solution.
Users who are viewing this thread
Similar threads
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server Config" has a "TV Mapping" panel in the "TV Channels" section. On the "TV Mapping" tab:
The left column lists the channels that have not yet been mapped to the TV tuner identified by the drop-down menu just...
I note that you are using MP2. The following applies to MP1, but I think that MP2 is identical in this situation.
"TV Server...
I've scanned for channels, and got all channels mapped to tuner 0 of my 8 channel TV card (eg: 2 cards of 4 channels each)
Is there...
Those signal numbers look fine. (y)
Unfortunately, I don't have any other suggestions as to the possible cause of your problem. :(
-- from CyberSimian in the UK
Those signal numbers look fine. (y)
Unfortunately, I don't have any other suggestions as to the possible cause of your problem. :(...
I've just rebuilt my htpc and added DVB-S and DVB-T cards TBS6281 and TBS6982. The system is all working well except for playback...
two simultaneous recordings succeeded. All good!
two simultaneous recordings succeeded. All good!
Since upgrading from 1.36 to 1.38, MP1 no longer connects to my tuners. They no longer appear under the server in the left-hand...
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which I might do if the issue persists.
Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which...
I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...