Signal level & signal quality (1 Viewer)
- Thread starter LukasCh
- Start date
Czech Republic
Signal level\quality is affected by the TVCard manufacturers driver, so by no means 100% accurate.
Take it you cannot view this channel, if the rest of your dvb channels show quality above 30% and they work, then it will be down to incoming signal too weak, this would not stop a settop box from being able to receive channels as they are better at handling weak signals anyway.
- Thread starter
- #3
My TV card Club 3D Zap TV 2202 (hybrid) has BDA drivers. I can see TV programs on one multiplex (626 MHz) signal quality lightly above 30%, bud i cannot see the second multiplex (506MHz) in my region because the signal quality is under 30%. Somethimes i canot find this multiplex in autoscan. The signal level is zero in both multiplexes. Both are the same tramsmitter (same place, same power). Maybe the fault is in my antena wall plug, because the wall plugs was changed in my flat (because of digital receiving). So someway i have to measure the signal level.
The only way to find if there is a problem, check with neighbours firstly, can they receive signals fine with no weather breakup, ie hard rain\wind. if they have good signal, then its your incoming signal at fault, so check any aerial connections that your comfortable dealing with, if not get a aerial installer to check incoming signal quality and advise you on what to do to improve the signal strength.
Users who are viewing this thread
Similar threads
I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ?
MP(1) will only use LAV if you select "Internal DirectShow player" as music output, but then you lose gapless playback.
If you you don't have multichannel music you can choose WASAPI as the output and set the number of speakers to stereo.
I have...
I don't know about MP2 but as you said you tried MP1 too, how is the MP music config ?
MP(1) will only use LAV if you select...
Not sure if this a a bug/config/settings problem.
I am running a media portal 2.5 server with 2.41 client but it seems I get the...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network.
Hauppauge card retired long ago. I have also retired very early SD units, the Quatros seem to work much better than the older units.
Go to SD's support website and download and install the windows...
I currently have two Quatros running, one connect, one duo using OTA antennae, mostly UHF fringe area, mostly cat5 local network...
I am currently using a Hauppauge WinTV QuadHD PCIe card on MP1 (1.37) for DVB-T, but 2 of the tuners have died. Thinking about...
Hello,
Name need to be the same as computer name.
Also, logs could be useful.
Hello,
Name need to be the same as computer name.
Also, logs could be useful.
It is a bit of a long story!
I successfully installed MP2 on my old PC as client/server with client on my laptop to confirm my...
I have added a scheduled task to MariaDB to delete all entries with the same start and end date
I have added a scheduled task to MariaDB to delete all entries with the same start and end date
Hello,
I'm encountering an issue after importing EPG data into the TV-Server/Database.
The Problem:
After importing an XMLTV...
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine.
Can you copy the created ts file(located in your timeshift folder) somewhere else while in channel preview and try to play it in VLC or MPC-HC?
PS: You can also try to make short record
Well, the log doesn't show any problems. I can see correctly tuned channels in the log. It seems to me that the tuner works fine...
I've been successfully using MediaPortal1 and TV Server 1.17 on Win7 for years, using first a HDHomerun tuner, when that died, a...