[SOLVED] not sleeping because of infinite StandbyWakeupThread loop (1 Viewer)

tybreizh29

Portal Member
January 19, 2005
22
1
Gif sur Yvette
Home Country
France France
hi
MP never go to sleep as with my config it should.
in the log i see the StandbyWakeupThread every minutes, i don't know where it comes from
thanks for your help
marc
 

mm1352000

Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,577
    8,224
    Home Country
    New Zealand New Zealand
    Hello Marc

    in the log i see the StandbyWakeupThread every minutes, i don't know where it comes from
    It comes from the PowerScheduler plugin.

    MP never go to sleep as with my config it should.
    There is probably some mistake in your config. Please post your full log files so your config can be checked:
    http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files

    Use option 3. To export existing log files.

    mm
     

    regeszter

    Retired Team Member
  • Premium Supporter
  • October 29, 2005
    5,335
    4,954
    Home Country
    Hungary Hungary
    Try to enable the PS forces system to go...

    ps.PNG
     

    michael_t

    Portal Pro
    November 30, 2008
    1,258
    813
    Home Country
    Germany Germany
    Everything seems to be fine from the logs. I just wonder if you did enable Plug&Play Mode in PowerScheduler's General tab. If not, please do so to sync your PowerScheduler config and your system's power settings. If you have no success by this, plaese stop the tvservice and restart it (e.g. in "Manual Control" in the TV Server Config) and then collect logs again....

    Michael
     

    azzuro

    Test Group
  • Team MediaPortal
  • May 10, 2007
    9,948
    5,617
    France - IDF
    Home Country
    France France
    an small [solved] on the title thread, is appreciated.

    Oue, vive les chapeaux ronds :whistle:
     

    Users who are viewing this thread

    Similar threads

    I have recently updated from MP 1.30 to 1.31 on a Win 11 PC slightly different to your software set up but given Win 10 is still supported I doubt there are many major differences regarding the ".NET Runtime Optimization Service". On my setup I am not seeing any significant CPU usuage MP takes around 3% and the TV Service is...
    I have recently updated from MP 1.30 to 1.31 on a Win 11 PC slightly different to your software set up but given Win 10 is still...
    Hi, I have a single seat setup with MP 1.31 on a Win10 machine. Since the last automated Windows update the TV-Service produces a...
    Replies
    7
    Views
    1K
    I removed all sign of MySQL, rebooted, did a clean reinstall. It reinstalled 5.6, But I've still got both the same problem - unable to connect to any of the specified MySQL hosts. And Hostname is still in red. I don't understand - this is a dedicated TV computer. Unless an update did this I don't know why there's a problem in the...
    I removed all sign of MySQL, rebooted, did a clean reinstall. It reinstalled 5.6, But I've still got both the same problem -...
    I've been using MediaPortal for 20 or so years. Last night it recorded perfectly. This arvo it doesn't - will run videos but not...
    Replies
    2
    Views
    367
    I uninstalled MP, made sure no sub folders were left n any programmes folders, changed the computer name, rebooted, installed MP and set logs and rebooted and ran TVServer. Didn't do anything in regard to S Loopback adapter. I've been using NextPvr since the problem became insurmountable. Only reason it's not a good long term...
    I uninstalled MP, made sure no sub folders were left n any programmes folders, changed the computer name, rebooted, installed MP...
    I've been using MediaPortal for 20 or so years. Last night it recorded perfectly. This arvo it doesn't - will run videos but not...
    Replies
    24
    Views
    1K
    I avoid touching that system as long as it runs. Now that 2.4.1 seems to run again, I probably wait for the next issue.
    I avoid touching that system as long as it runs. Now that 2.4.1 seems to run again, I probably wait for the next issue.
    Hi, I have just upgraded from MP 2.2.2 to MP 2.4.1, and now the client won't start. I see the splash screen, and then it just...
    Replies
    3
    Views
    854
    Just did an update of my system from Win 7 / MP 1.25 to Win 10 / MP 1.31 on a single seat system and came across a problem with the tv server startup being erratic. Approx 50% of the time on PC reboot from scratch the tv server process was showing "starting" but would never start and consequently neither would MP or MP Server Config...
    Just did an update of my system from Win 7 / MP 1.25 to Win 10 / MP 1.31 on a single seat system and came across a problem with the...
    Just did an update of my system from Win 7 / MP 1.25 to Win 10 / MP 1.31 on a single seat system and came across a problem with the...
    Replies
    0
    Views
    731
    Top Bottom