[SOLVED] not sleeping because of infinite StandbyWakeupThread loop (1 Viewer)

tybreizh29

Portal Member
January 19, 2005
22
1
Gif sur Yvette
Home Country
France France
hi
MP never go to sleep as with my config it should.
in the log i see the StandbyWakeupThread every minutes, i don't know where it comes from
thanks for your help
marc
 

mm1352000

Retired Team Member
  • Premium Supporter
  • September 1, 2008
    21,578
    8,228
    Home Country
    New Zealand New Zealand
    Hello Marc

    in the log i see the StandbyWakeupThread every minutes, i don't know where it comes from
    It comes from the PowerScheduler plugin.

    MP never go to sleep as with my config it should.
    There is probably some mistake in your config. Please post your full log files so your config can be checked:
    http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/16_Support/3_Forums/2_Log_Files

    Use option 3. To export existing log files.

    mm
     

    michael_t

    Portal Pro
    November 30, 2008
    1,258
    813
    Home Country
    Germany Germany
    Everything seems to be fine from the logs. I just wonder if you did enable Plug&Play Mode in PowerScheduler's General tab. If not, please do so to sync your PowerScheduler config and your system's power settings. If you have no success by this, plaese stop the tvservice and restart it (e.g. in "Manual Control" in the TV Server Config) and then collect logs again....

    Michael
     

    azzuro

    Test Group
  • Team MediaPortal
  • May 10, 2007
    9,989
    5,669
    France - IDF
    Home Country
    France France
    an small [solved] on the title thread, is appreciated.

    Oue, vive les chapeaux ronds :whistle:
     

    Users who are viewing this thread


    Write your reply...

    Similar threads

    Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use just to control volume and standby, will no longer put my devices (TV & AVR) to sleep when the HTPC is put in standby. Also when I wake up the HTPC MP closes or crashes (not sure which) as per the example in...
    Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
    Ran into this problem following an otherwise sucessful upgrade from MP 1.34 x64 to MP 1.35 x64 the CEC Remote plugin which I use...
    Replies
    0
    Views
    719
    If you remember, I wrote about it when tests because of x86/x64 problems
    If you remember, I wrote about it when tests because of x86/x64 problems
    Hia all, So, decided to setup a new client instance and getting fed-up with the tonne of bloatware and cr*p that comes with...
    Replies
    9
    Views
    1K
    You can always use GitHub online But judging by the picture, you are doing well. Direct Push to Master is prohibited, create PR.
    You can always use GitHub online But judging by the picture, you are doing well. Direct Push to Master is prohibited, create PR.
    Hello, Because I was annoyed with closing MP, launch config, modify setting and start MP again, I decided to give MP the ability...
    Replies
    5
    Views
    3K
    Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which I might do if the issue persists.
    Perhaps... Only way to confirm would be for me to invest in a different USB DVB-S2 tuner (like the Hauppauge WinTV-NOVA-S2), which...
    I have a dedicated TV Server x64 v1.36 running on Windows 11, with a Hauppauge WinTV-dualHD tuner for DVB-T channels (Freeview) and...
    Replies
    8
    Views
    1K
    MP1 MP2 Case Downsizing DE
    Most (all?) small PC cases accept only ITX motherboards, which have only one PCI-E slot. So you could install only one PCI-E tuner card. A quad-tuner card would give you four tuners, but if you wanted more tuners you would need to use the TBS eight-tuner card, or use external tuners, either USB tuners (available with single or dual...
    Most (all?) small PC cases accept only ITX motherboards, which have only one PCI-E slot. So you could install only one PCI-E tuner...
    I've been using MP2 now for about 3 years: I really happy with the way it works, although I can think of many great features I'd...
    Replies
    1
    Views
    791
    Top Bottom