TV Card with PCI-E and S2 (1 Viewer)

Dettenrocks

Portal Pro
October 13, 2008
73
0
Home Country
Germany Germany
Hy

I search a TV-Card with PCI-E and S2!

It must be a PCI-E(Because my new Mainboard)

Have you a Idee? i can't find a card which is cheaper than 100€.

Michael
 

Spooky

MP Donator
  • Premium Supporter
  • February 14, 2005
    1,187
    47
    void 4tl
    Home Country
    Austria Austria
    Well, there is not much choice. You can basically choose from these: PC-Video/Video-/TV-Karten intern PCIe, DVB-S2 | Geizhals.at Österreich and of course the tv cards from Digital Devices. According to the Wiki, the TBS ones are supposed to be supported by MediaPortal, also KNC cards should work. Support for Digital Devices cards was introduced in 1.2.0 alpha.

    But the KNC and Digital Devices cards are very expensive. If you want to stay below 100€, then the TBS one seems to be the only option (regardless of MediaPortal support).
     

    skywalkerman

    Portal Member
    May 16, 2011
    7
    0
    39
    Home Country
    Sweden Sweden
    Mine is TBS6981 PCI-E DVB-S2 Dual Tuner TV card. it cost me 100€, but it works great with my window media center. It is a tv card with dual tuner, so you can watch channel from one transporder/satellite while recording another channel from another transporder/satellite. it is building HTPC under Linux MythTV, VDR, XBMC and Windows 7 Media Center.
     

    Users who are viewing this thread

    Similar threads

    I solved it myself, by modifying the host IP-address in the server table of the database, MariaDB [(none)]> use mptvdb; Database changed MariaDB [mptvdb]> SELECT * FROM Server; +----------+----------+--------------+----------+ | idServer | isMaster | hostName | rtspPort | +----------+----------+--------------+----------+ |...
    I solved it myself, by modifying the host IP-address in the server table of the database, MariaDB [(none)]> use mptvdb; Database...
    Hello everyone, I'm going to need help from the community to resolve a TV server crash issue. I encountered a problem with my...
    Replies
    4
    Views
    783
    Added x64 version to my previous post.
    Added x64 version to my previous post.
    After getting MP1.36 installed and set up after a few problems, I have the problem that MP usually doesn't start. It usually only...
    Replies
    33
    Views
    1K
    Result, it works on the two PC's we use for watching TV :D I've not lost anything by the looks of it either, all channels etc still setup. Just my office PC won't connect, which I only use for testing things anyway (I tried updating that this morning as well), but I'll uninstall and install fresh on that. PS. Exported all settings...
    Result, it works on the two PC's we use for watching TV :D I've not lost anything by the looks of it either, all channels etc still...
    I tried to install MP 1.35 this morning, but I couldn't get any further with the installation on the TV server, see error message...
    Replies
    13
    Views
    1K
    It's getting weirder..... If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the stations but if I rescan it on the same card it just keeps updating the 1 channel. My brain is melting.........
    It's getting weirder..... If I remove all the IP cards in the TVServer setup and then add them back I can scan the M3u and tune the...
    Having great fun with this still. I have a fairly good PC setup, Ryzen 5 8500g, Msi Pro 650M-P with 32GB of RAM with a TBS 6281 and...
    Replies
    2
    Views
    286
    I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software controls the emitter, and transmits IR signals under the direction of MP. The IR signal is received by the IR receiver within the set-top box, and so can be used to change channel and so on. The set-top...
    I also have never used a set-top box with MP, but I think that you need to use an IR emitter (aka "IR blaster"). The IRSS software...
    My computer is running Windows 10 Pro. I have installed MP2. Not sure what version. I have a Hauppauge WinTV 1850 TV card...
    Replies
    8
    Views
    2K
    Top Bottom