TV Server Set Up Fails to load Installing V 1.4 (1 Viewer)
- Thread starter beatnut88
- Start date
- September 1, 2008
- 21,544
- 8,236
- Home Country
-
New Zealand
Hello Neil
Were you running an older or custom version of TV Server with MP 1.3?
For whatever reason the installer either didn't try or failed to update TV Server and the TV plugin.
Did you stop the TV service before attempting to update?
If I were you I'd try the install again... but you may have to do an unistall/reinstall.
Were you running an older or custom version of TV Server with MP 1.3?
For whatever reason the installer either didn't try or failed to update TV Server and the TV plugin.
Did you stop the TV service before attempting to update?
If I were you I'd try the install again... but you may have to do an unistall/reinstall.
- Thread starter
- #3
found the fix in another post
Thanks
Sorry to hear it didnt work out as you expected.
I suggested you do the following to install the TV Server part:
Last edited by HomeY, Jul 12, 2013I suggested you do the following to install the TV Server part:
- Download and install 7zip
- Right mouse-click on the MediaPortal installer and select 'Open Archive'
- Double click the 'deploy' folder
- Select package-tvengine, press F5 and copy it to a folder
- Run package-tvengine and install
Thanks
Users who are viewing this thread
Similar threads
Thank you for pointing out that my analysis may be less than accurate. :eek: :p
Although the change to TV channel 71 may not also have been applied to the independent radio channels (different MUXes), the logs that I prepared for one of the development team does show a difference between channel 704 ("BBC Radio 4") and channel 731...
Thank you for pointing out that my analysis may be less than accurate. :eek: :p
Although the change to TV channel 71 may not also...
I have just discovered that I can no longer receive any of the independent radio channels broadcast on DVB-T in the UK. In...
@CyberSimian
this workaround worked.
@TLD
this hint was good because I wanted to install x64. Now I have x86 installed
@CyberSimian
this workaround worked.
@TLD
this hint was good because I wanted to install x64. Now I have x86 installed
After reinstalling a WinTV quad HD card and MP1.36, the TV service no longer starts automatically. A manual start is no problem...
Hello,
Name need to be the same as computer name.
Also, logs could be useful.
Hello,
Name need to be the same as computer name.
Also, logs could be useful.
It is a bit of a long story!
I successfully installed MP2 on my old PC as client/server with client on my laptop to confirm my...
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a DVB-T2 tuner (a TBS 6284) :(, but succeeded when I used a DVB-T tuner (a Pinnacle 2000i) :). Obviously the Pinnacle found only those channels broadcast in DVB-T MUXes (in the UK we have both DVB-T MUXes and...
When I tested MP 2.5 some months ago using TVE3.5, I found that "scan for channels" failed to find any channels when I selected a...
Hi all
Running 1.7.1.0 TV Server as part of a full upgrade to MP2 2.5 setup
After some problems with retuning (solved -...
MP1
MP2
1.38
Running TVService as "NT Service\TVService" or "Local Service" not working anymore since Windows September 2025 updates
DE
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
Reading through your code, I can see it's more than a couple steps above my paygrade. :cry:
I used to run the TVService under the "NT Service\TVService" account to follow least privileges principal (not exposing my whole...
