Tv Slow to load (1 Viewer)

N

Nato

Portal Pro
April 18, 2006
156
4
Christchurch
Home Country
New Zealand New Zealand
Hi All,
I have just upgraded to 1.1.0 RC4 (from 1.0.2)
and now when selecting to watch tv, the tv takes alot longer to start (around 15-20 secs) anyone else have this issue?
 
N

Nato

Portal Pro
April 18, 2006
156
4
Christchurch
Home Country
New Zealand New Zealand
also channel changing takes abit of time too ... are any devs aware of this or anybody else having this issue? (as currently ruining my MP experience :( )
 
N

Nato

Portal Pro
April 18, 2006
156
4
Christchurch
Home Country
New Zealand New Zealand
Bump anyone ???
I have upgraded to 1.1 Final and this issue is still there..... Never was a problem with 1.0.2 :(
 

Users who are viewing this thread

Online now: 2 (members: 0, guests: 2)

Similar threads

Steve.Rayner61
MP1 MP2 Unknown Error Occurred when trying to watch TV - MePo 1.36 DE
Apologies Pablik. My bad. I neglected to run WMI Manager and check Properties as you advised. Sure enough, it produced this error: I tried to run winmgmt /resetrepository, but there were conflicts with running services. So I stopped those services (Malwarebytes & IP Helper), then stopped the winmgmt service. I was then able to run...
Apologies Pablik. My bad. I neglected to run WMI Manager and check Properties as you advised. Sure enough, it produced this error...
Hi, Was using v1.33 without issue. Then started receiving error message "Unknown error occurred" when trying to watch TV. Upgraded...
Replies
7
Views
3K
Steve.Rayner61
Steve.Rayner61
D
MP1 MP2 MP2 - V2.3 Difference between using specific audio renderer versus "Default WaveOut Device"? DE
Sorry, it's my fault -- I did not notice that you are using MP2. :( MP1 has a separate configuration utility, similar to "TV Server Config". I have tried MP2 only a couple of times, and have never used it seriously. I don't know what MP2 supports with regard to adjusting audio delay, but I do know that all of the adjustments of...
Sorry, it's my fault -- I did not notice that you are using MP2. :( MP1 has a separate configuration utility, similar to "TV...
Hi. I recently upgraded my home cinema AVR which also meant changed from sending audio from my HTPC as 5.1 using optical to 7.1...
Replies
5
Views
3K
CyberSimian
CyberSimian
N
MP1 MP2 Logo Management, Revisted DE
Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in Settings (which somehow I had missed, I think because it wasn't an option previously), and the deleted everything in the Flat-default folder and populated it with my own logos. Works, so far.
Ok, thanks much. I will look into the instructions above. For the moment, I turned off the "Automatic channel logo update" in...
Hi-- I have to revisit an old issue, unfortunately. I just downloaded MP 2.5, a fresh installation, on a new computer (reluctantly...
Replies
5
Views
2K
Nordfinn
N
D
MP1 MP2 [solved] Fresh MP2 install issues (no DVD sound / LAV filters) DE
Fixed, I think. Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that these were never part of the install package itself, but rather downloaded during the install, and that link no longer exists. Shame that the installer doesn't indicate this. Last time when I installed the...
Fixed, I think. Certainly the vintage MP2 installer that I was using no longer installs the LAV filters. I can only assume that...
Hi all, I've recently retired my MP2 setup for my main HTPC and gone back to separates, but I wanted to retain the ability to play...
Replies
4
Views
451
Digsy
D
H
MP1 MP2 TV server service does not start automatically DE
@CyberSimian this workaround worked. @TLD this hint was good because I wanted to install x64. Now I have x86 installed
@CyberSimian this workaround worked. @TLD this hint was good because I wanted to install x64. Now I have x86 installed
After reinstalling a WinTV quad HD card and MP1.36, the TV service no longer starts automatically. A manual start is no problem...
Replies
4
Views
2K
harryzwo
H

About The Project

The vision of the MediaPortal project is to create a free open source media centre application, which supports all advanced media centre functions, and is accessible to all Windows users.

In reaching this goal we are working every day to make sure our software is one of the best.

         

Quick Navigation

Support MediaPortal!

The team works very hard to make sure the community is running the best HTPC-software. We give away MediaPortal for free but hosting and software is not for us.

Care to support our work with a few bucks? We'd really appreciate it!

Community platform by XenForo® © 2010-2021 XenForo Ltd.
Top Bottom